adapted to new improved build system

AUTHORS

@@ -0,0 +1 @@
+Marc Wäckerlin (http://marc.waeckerlin.org) <marc@waeckerlin.org>

COPYING

@@ -1 +1 @@
-/usr/share/automake-1.13/COPYING
+/usr/share/automake-1.14/COPYING

ChangeLog

@@ -0,0 +1,709 @@
+2014-11-05 09:05  marc
+
+	* ax_check_qt.m4: no more -fPIC check; refs #41
+
+2014-10-27 13:23  marc
+
+	* ax_check_qt.m4: improve QT check; refs #41
+
+2014-09-19 09:05  marc
+
+	* configure.in: need variables - typo; refs #41
+
+2014-09-19 09:04  marc
+
+	* ax_check_qt.m4, configure.in: need variables; refs #41
+
+2014-09-19 08:44  marc
+
+	* configure.in: need libroxy on mac; refs #41
+
+2014-09-19 08:38  marc
+
+	* configure.in: need libroxy on mac; refs #41
+
+2014-09-19 08:36  marc
+
+	* configure.in: need libroxy on mac; refs #41
+
+2014-09-19 08:33  marc
+
+	* configure.in: need libroxy on mac; refs #41
+
+2014-09-19 08:26  marc
+
+	* ax_check_qt.m4, configure.in: much better qt tests; refs #41
+
+2014-06-04 13:10  marc
+
+	* proxyface.spec.in: graphviz is not required; refs #40
+
+2014-06-03 09:21  marc
+
+	* configure.in: moc needs -DQ_OS_WIN; refs #40
+
+2014-05-27 10:33  marc
+
+	* configure.in: moc does not understand all flags; refs #40
+
+2014-05-26 09:19  marc
+
+	* src/makefile.am: moc does not understand all flags; refs #40
+
+2014-05-26 08:11  marc
+
+	* configure.in: darwin uses qt lib not google proxy; refs #40
+
+2014-05-26 08:05  marc
+
+	* configure.in: *win* also matches for «darwin» which is Mac not
+	  Windoze; refs #40
+
+2014-05-20 13:41  marc
+
+	* proxyface.spec.in: qt tools don't work in fedora/opensuse - typo;
+	  refs #40
+
+2014-05-20 09:42  marc
+
+	* proxyface.spec.in: qt tools don't work in fedora/opensuse; refs
+	  #40
+
+2014-05-20 09:42  marc
+
+	* src/makefile.am: qt tools don't work in fedora/opensuse; refs #40
+
+2014-05-20 09:11  marc
+
+	* src/makefile.am: qt tools don't work in fedora/opensuse; refs #40
+
+2014-05-20 09:05  marc
+
+	* proxyface.spec.in: qt tools don't work in fedora/opensuse; refs
+	  #40
+
+2014-05-19 13:54  marc
+
+	* proxyface.spec.in: qt tools don't work in fedora/opensuse; refs
+	  #40
+
+2014-05-19 11:39  marc
+
+	* proxyface.spec.in: add PKCS11 include path to RPM spec; refs #40
+
+2014-05-16 11:04  marc
+
+	* configure.in: missed a uic in comment; refs #40
+
+2014-05-16 09:18  marc
+
+	* debian/rules: set MOC to /usr/bin/moc for debian, because on
+	  lucid it would be /usr/bin/moc-qt4, but there is no
+	  /usr/bin/rcc-qt4, only /usr/bin/rcc; refs #40
+
+2014-05-16 09:10  marc
+
+	* configure.in: check and try to detect Qt tools; refs #40
+
+2014-05-16 07:36  marc
+
+	* configure.in: strange failure in Ubuntu lucid, seems that is
+	  empty?; refs #40
+
+2014-05-15 11:52  marc
+
+	* src/proxyface/autoproxy.hxx: Qt Proxy crases on Windows in Qt
+	  5.2.1; refs #40
+
+2014-05-15 11:18  marc
+
+	* src/proxyface/qtproxy.hxx: Divided into steps, more output; refs
+	  #40
+
+2014-05-15 11:17  marc
+
+	* src/proxyface/qtproxy.hxx: Divided into steps, more output; refs
+	  #40
+
+2014-05-15 11:15  marc
+
+	* src/proxyface/qtproxy.hxx: Divided into steps, more output; refs
+	  #40
+
+2014-05-14 14:09  marc
+
+	* src/proxyface/qtproxy.hxx: Divided into steps, more output; refs
+	  #40
+
+2014-05-14 09:40  marc
+
+	* src/proxyface/qtproxy.hxx: Crash on Windows, add more output;
+	  refs #40
+
+2014-05-12 07:37  marc
+
+	* proxyface.spec.in: fix rpm-build; refs #40
+
+2014-05-06 11:36  marc
+
+	* examples/simplegui.cxx: again widgets in qt5; refs #40
+
+2014-05-06 11:18  marc
+
+	* examples/simplegui.cxx: again widgets in qt5; refs #40
+
+2014-05-06 11:15  marc
+
+	* configure.in: typo; refs #40
+
+2014-05-06 10:26  marc
+
+	* src/proxyface/qtproxy.hxx: fixed compile issues; refs #40
+
+2014-05-06 10:21  marc
+
+	* COPYING, INSTALL, configure.in, src/makefile.am: fixed compile
+	  issues; refs #40
+
+2014-05-06 07:32  marc
+
+	* src/proxyface/windoze.hxx: support qt4 and qt5; refs #40
+
+2014-05-06 07:30  marc
+
+	* src/proxyface/proxy.hxx: support qt4 and qt5; refs #40
+
+2014-05-06 07:22  marc
+
+	* src/proxyface/proxy.hxx, src/proxyface/proxyauth.hxx: support qt4
+	  and qt5; refs #40
+
+2014-05-06 07:17  marc
+
+	* src/proxyface/proxyauth.hxx: support qt4 and qt5; refs #40
+
+2014-05-06 07:10  marc
+
+	* src/proxyface/proxyauth.hxx: support qt4 and qt5; refs #40
+
+2014-05-05 12:58  marc
+
+	* src/proxyface/proxyauth.hxx: same qt configuration as in
+	  libpcscxx; refs #40
+
+2014-05-05 12:57  marc
+
+	* examples/makefile.am, src/makefile.am: same qt configuration as
+	  in libpcscxx; refs #40
+
+2014-05-05 12:49  marc
+
+	* ax_cxx_compile_stdcxx_11.m4, configure.in, examples/makefile.am,
+	  src/makefile.am: same qt configuration as in libpcscxx; refs #40
+
+2014-05-05 12:35  marc
+
+	* configure.in: find all tools in same dir as moc; refs #40
+
+2014-05-05 12:29  marc
+
+	* configure.in: find all tools in same dir as moc; refs #40
+
+2014-05-05 12:23  marc
+
+	* configure.in, src/proxyface/proxy.hxx: find all tools in same dir
+	  as moc; refs #40
+
+2013-04-05 10:48  marc
+
+	* src/makefile.am: added target rebuid-ts in src; closes #39
+
+2013-01-25 14:39  marc
+
+	* proxyface.spec.in: fix fedora-18 bug; closes #37
+
+2012-10-03 10:17  marc
+
+	* src/proxyface/proxy.hxx: expose proxy search function; refs #36
+
+2012-09-20 11:38  marc
+
+	* src/indicator.gif, src/makefile.am, src/proxyface/indicator.gif,
+	  src/proxyface/proxy.ui, src/proxyface/resources.qrc,
+	  src/resources.qrc: changed maximum port number to 65535; refs #35
+
+2012-09-18 14:25  marc
+
+	* proxyface.spec.in: also qt is different; refs #33
+
+2012-09-18 13:35  marc
+
+	* proxyface.spec.in: other dependency for fedora; refs #33
+
+2012-03-13 12:14  marc
+
+	* configure.in, install-64-and-32-bit-linux.sh: add option to
+	  choose moc; refs #32
+
+2011-12-20 11:33  marc
+
+	* proxyface.spec.in: replaced lib with %_lib; refs #20
+
+2011-12-16 08:10  marc
+
+	* debian/rules: add dh_makeshlibs to debian/rules; refs #19
+
+2011-11-28 13:40  marc
+
+	* src/proxyface/autoproxy.hxx: setup proxy for $HTTP_PROXY, if
+	  env-variable is defined; refs #12
+
+2011-11-28 13:28  marc
+
+	* src/proxyface/autoproxy.hxx: reverted [63], removed test; closes
+	  #9
+
+2011-11-28 13:20  marc
+
+	* configure.in: error if qt not found; closes #18
+
+2011-11-10 10:34  marc
+
+	* ChangeLog, configure.in, debian/changelog.in, debian/control,
+	  debian/copyright, debian/rules, doc, doc/doxyfile.in,
+	  doc/doxygenlayout.xml, doc/makefile.am, examples/makefile.am,
+	  makefile.am, proxyface, proxyface.spec.in, src,
+	  src/autoproxy.hxx, src/libproxyface.pc.in, src/makefile.am,
+	  src/proxy.hxx, src/proxy.ui, src/proxy_de.ts, src/proxy_en.ts,
+	  src/proxy_fr.ts, src/proxy_it.ts, src/proxyauth.hxx,
+	  src/proxyauth.ui, src/proxyface, src/proxyface.pc.in,
+	  src/proxyface/autoproxy.hxx, src/proxyface/proxy.hxx,
+	  src/proxyface/proxy.ui, src/proxyface/proxyauth.hxx,
+	  src/proxyface/proxyauth.ui, src/proxyface/qtproxy.hxx,
+	  src/proxyface/unix.hxx, src/proxyface/windoze.hxx,
+	  src/qtproxy.hxx, src/unix.hxx, src/windoze.hxx: changed build
+	  system, added rpm spec; closes #2
+
+2011-06-03 06:01  marc
+
+	* configure.in, install-32-bit-lin-win.sh,
+	  install-64-and-32-bit-linux.sh: proxy works for @73, but not for
+	  @84, undo [74] - [84]; refs #17
+
+2011-05-26 14:43  marc
+
+	* install-64-and-32-bit-linux.sh: refs #17
+
+2011-05-25 08:47  marc
+
+	* configure.in: closes #16
+
+2011-04-06 12:53  marc
+
+	* install-64-and-32-bit-linux.sh: typo; closes #15
+
+2011-04-06 12:40  marc
+
+	* install-32-bit-lin-win.sh, install-64-and-32-bit-linux.sh: closes
+	  #15
+
+2011-04-06 12:06  marc
+
+	* install-32-bit-lin-win.sh, install-64-and-32-bit-linux.sh: closes
+	  #15
+
+2011-02-17 08:22  marc
+
+	* configure.in: refs #10
+
+2011-02-17 08:15  marc
+
+	* configure.in: refs #10
+
+2011-02-16 15:03  marc
+
+	* configure.in: refs #10
+
+2011-02-16 14:49  marc
+
+	* configure.in: refs #10
+
+2011-02-16 14:19  marc
+
+	* configure.in: refs #10
+
+2011-02-16 13:46  marc
+
+	* configure.in: refs #10
+
+2010-12-15 10:17  marc
+
+	* debian/proxyface-dev.dirs, debian/proxyface-dev.install: install
+	  translation files; refs #14
+
+2010-12-15 09:54  marc
+
+	* debian/proxyface-dev.dirs: install translation files; refs #14
+
+2010-12-15 09:13  marc
+
+	* debian/proxyface-dev.dirs: install translation files; refs #14
+
+2010-11-30 09:41  marc
+
+	* proxyface/makefile.am: install translation files; closes #14
+
+2010-11-09 15:47  marc
+
+	* proxyface/proxy.hxx, proxyface/proxy.ui, proxyface/proxy_de.ts,
+	  proxyface/proxy_en.ts, proxyface/proxy_fr.ts,
+	  proxyface/proxy_it.ts: stores username/password, also removed
+	  default urls; closed #13
+
+2010-11-03 12:55  marc
+
+	* configure.in, examples/makefile.am, proxyface/autoproxy.hxx,
+	  proxyface/makefile.am, proxyface/proxy.hxx: Resolved: GET request
+	  works, HEAD request fails, closes #13
+
+2010-11-01 16:06  marc
+
+	* Doxyfile.in, configure.in, examples, examples/getproxylist.cxx,
+	  examples/makefile.am, examples/simplegui.cxx, makefile.am,
+	  proxyface/autoproxy.hxx, proxyface/makefile.am,
+	  proxyface/proxy.hxx, proxyface/proxy.ui, proxyface/proxy_de.ts,
+	  proxyface/proxy_en.ts, proxyface/proxy_fr.ts,
+	  proxyface/proxy_it.ts, proxyface/resources.qrc, test.cxx: cleanup
+	  and documentation; refs #13
+
+2010-10-12 06:30  marc
+
+	* proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts: xlations fr and de,
+	  refs #11 (#361 in swissstick)
+
+2010-10-07 09:22  marc
+
+	* proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts: xlations in de and
+	  en, refs #11
+
+2010-09-21 13:42  marc
+
+	* configure.in: no more libproxy for mac; refs #10
+
+2010-09-20 13:00  marc
+
+	* proxyface/autoproxy.hxx: temporary change for debugging, see #9
+
+2010-09-17 12:30  marc
+
+	* proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts: new texts; refs #8
+
+2010-09-17 12:24  marc
+
+	* proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts: new texts; closes
+	  #8
+
+2010-08-03 14:18  marc
+
+	* proxyface/proxyauth.hxx, proxyface/proxyauth.ui: new dialog and
+	  new library - forgotten files, refs #6
+
+2010-08-03 14:12  marc
+
+	* proxyface/autoproxy.hxx, proxyface/proxy.hxx,
+	  proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts,
+	  proxyface/qtproxy.hxx: new dialog and new library, refs #6
+
+2010-08-03 13:53  marc
+
+	* configure.in, proxyface/makefile.am, proxyface/version.cxx.in:
+	  closes #7
+
+2010-07-09 14:33  marc
+
+	* proxyface/qtproxy.hxx, proxyface/resources.qrc: main
+	  implementation done, to be tested; refs #6, refs #5
+
+2010-07-09 14:32  marc
+
+	* proxyface/autoproxy.hxx, proxyface/indicator.gif,
+	  proxyface/makefile.am, proxyface/plainqt.hxx,
+	  proxyface/proxy.hxx, proxyface/proxy.ui, proxyface/proxy_de.ts,
+	  proxyface/proxy_en.ts, proxyface/proxy_fr.ts,
+	  proxyface/proxy_it.ts, proxyface/windoze.hxx: main implementation
+	  done, to be tested; refs #6, refs #5
+
+2010-07-08 10:22  marc
+
+	* proxyface/autoproxy.hxx: do not send an error when resetting
+	  outstanding requests; refs #5
+
+2010-07-08 09:31  marc
+
+	* proxyface/autoproxy.hxx: better handling of reset outstanding
+	  requests, and shorter timeout2; refs #5
+
+2010-07-08 08:25  marc
+
+	* proxyface/proxy.hxx: when a manual proxy was set, setting
+	  automatic proxy did not clean old proxy settings, refs #5
+
+2010-07-06 09:56  marc
+
+	* proxyface/proxy.hxx: also added ping() to GUI-class; refs #5
+
+2010-06-29 09:48  marc
+
+	* proxyface/proxy.hxx: cancel button now resets settings, refs #5
+
+2010-06-28 11:48  marc
+
+	* proxyface/autoproxy.hxx, proxyface/proxy.hxx: new mthod ping and
+	  called from GUI-detection, refs #5
+
+2010-06-25 12:33  marc
+
+	* configure.in, proxyface/proxy.hxx: proxy-detection was not always
+	  restarted in acceptValues, refs #5
+
+2010-06-01 13:36  marc
+
+	* install-32-bit-lin-win.sh: 32bit-build added, refs #2
+
+2010-05-12 08:39  marc
+
+	* debian/changelog.in: SwissSign E-Mail, see #2
+
+2010-05-12 08:31  marc
+
+	* debian/control, makefile.am: SwissSign E-Mail, see #2
+
+2010-04-30 09:12  marc
+
+	* install-64-and-32-bit-linux.sh, proxyface/autoproxy.hxx: No
+	  Multithreading on Windows, refs #4
+
+2010-04-26 06:44  marc
+
+	* configure.in: vesion increased, see #3
+
+2010-04-16 11:48  marc
+
+	* makefile.am: build debian for all architectures, see #2
+
+2010-04-15 13:15  marc
+
+	* configure.in, debian/control, debian/proxyface.dirs,
+	  debian/proxyface.install, debian/proxyface1.dirs,
+	  debian/proxyface1.install, debian/rules,
+	  proxyface/libproxyface.pc.in: bugfixes for debian, see #2
+
+2010-04-08 12:14  marc
+
+	* configure.in, debian/changelog.in, makefile.am: debian package
+	  creation works perfectly, see #2
+
+2010-04-08 07:54  marc
+
+	* ChangeLog, configure.in, debian/changelog, debian/changelog.in,
+	  debian/rules, makefile.am, proxyface/libproxyface.pc.in,
+	  proxyface/makefile.am: Debian Packages can now be created, see #2
+
+2010-04-08 07:39  marc
+
+	* ChangeLog: get Changelog from svn-Log, see #2
+
+2010-04-07 15:23  marc
+
+	* NEWS, README, configure.in, debian, debian/changelog,
+	  debian/compat, debian/control, debian/copyright, debian/dirs,
+	  debian/docs, debian/proxyface-dev.dirs,
+	  debian/proxyface-dev.install, debian/proxyface.doc-base.EX,
+	  debian/proxyface1.dirs, debian/proxyface1.install, debian/rules,
+	  debian/shlibs.local.ex, debian/watch.ex: now works with LEAST as
+	  revision from repository, see #2
+
+2010-04-07 14:47  marc
+
+	* configure.in: Set revision, see #2
+
+2010-04-07 14:40  marc
+
+	* configure.in: Set revision, see #2
+
+2010-04-07 14:38  marc
+
+	* configure.in: Set revision, see #2
+
+2010-03-10 08:09  marc
+
+	* proxyface/autoproxy.hxx: temporary memory leak to prevent crash
+
+2010-03-09 12:30  marc
+
+	* proxyface/autoproxy.hxx: no more crash on windows
+
+2010-03-04 13:27  marc
+
+	* configure.in, proxyface/autoproxy.hxx, proxyface/makefile.am,
+	  proxyface/plainqt.hxx, proxyface/proxy.hxx,
+	  proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts: more info on fail
+
+2009-12-15 08:15  marc
+
+	* proxyface/autoproxy.hxx: multithreading for all but windoze 2
+
+2009-12-15 08:14  marc
+
+	* proxyface/autoproxy.hxx: multithreading for all but windoze
+
+2009-12-14 15:30  marc
+
+	* install-64-and-32-bit-linux.sh, proxyface/autoproxy.hxx,
+	  proxyface/proxy.hxx: no more multithreading; no more fallback
+
+2009-11-03 12:29  marc
+
+	* proxyface/autoproxy.hxx, proxyface/proxy.hxx, proxyface/proxy.ui:
+	  get proxy list in background thread
+
+2009-11-03 09:56  marc
+
+	* COPYING, INSTALL, proxyface/autoproxy.hxx: start proxy detection
+	  in own thread
+
+2009-10-28 15:46  marc
+
+	* proxyface/proxy.hxx, proxyface/proxy_de.ts,
+	  proxyface/proxy_en.ts, proxyface/proxy_fr.ts,
+	  proxyface/proxy_it.ts: From SwissStick-Ticket #150: Fallback for
+	  Proxy Configuration - If the configured proxy can't be found, try
+	  detection
+
+2009-08-24 14:24  marc
+
+	* proxyface/proxy.ui, proxyface/proxy_de.ts, proxyface/proxy_en.ts,
+	  proxyface/proxy_fr.ts, proxyface/proxy_it.ts: Replaced ö by oe
+
+2009-08-20 11:58  marc
+
+	* configure.in, proxyface/makefile.am, proxyface/proxy_de.ts,
+	  proxyface/proxy_en.ts, proxyface/proxy_fr.ts,
+	  proxyface/proxy_it.ts: translations added
+
+2009-07-20 07:38  marc
+
+	* proxyface/autoproxy.hxx: larger timeout
+
+2009-07-09 08:44  marc
+
+	* proxyface/proxy.hxx: gui namespace
+
+2009-06-29 09:46  marc
+
+	* proxyface/autoproxy.hxx, proxyface/proxy.hxx: new options for
+	  SwissSurfer
+
+2009-06-04 07:46  marc
+
+	* proxyface/proxy.hxx: swissstick Ticket #109
+
+2009-05-25 12:43  admin
+
+	* proxyface/makefile.am: duplicate header entry
+
+2009-05-25 12:06  admin
+
+	* proxyface/autoproxy.hxx: two different timeouts, first is horter,
+	  second one is longer (1s/9s); second try includes direct and
+	  default proxy again
+
+2009-05-06 14:55  admin
+
+	* test.cxx: Corrected example file
+
+2009-04-08 08:25  
+
+	* configure.in, qmake.pro: darwin contains win, so this cannot be a
+	  criteria to detect windoze in the host name
+
+2009-04-08 07:56  
+
+	* configure.in: Qt include path for Mac-OSX added
+
+2009-04-08 07:25  
+
+	* autoproxy.hxx, configure.in, install-64-and-32-bit-linux.sh,
+	  makefile.am, proxyface/autoproxy.hxx, proxyface/gui,
+	  proxyface/makefile.am, proxyface/proxy.hxx, proxyface/proxy.ui,
+	  uninstall-64-and-32-bit-linux.sh, winhttp.a: new build system
+
+2009-04-01 10:35  
+
+	* proxyface/gui/proxy.hxx: url and port only editable if not direct
+	  or automatic
+
+2009-03-31 09:32  
+
+	* proxyface/windoze.hxx: resolve missing last proxy in proxy
+	  detection
+
+2009-03-30 09:55  
+
+	* autoproxy.hxx, proxyface/gui/proxy.hxx, proxyface/windoze.hxx,
+	  qmake.pro: firewall-safe proxy detection 1st try
+
+2009-03-20 14:31  
+
+	* proxyface/gui/proxy.hxx: show found proxy in gui
+
+2009-03-20 09:06  
+
+	* autoproxy.hxx, proxyface/gui/proxy.hxx: autoproxy detection for
+	  given URL in GUI
+
+2009-03-17 14:58  
+
+	* qmake.pro: missing target name resultet in libqmake
+
+2009-03-17 11:01  
+
+	* proxyface/gui/proxy.hxx, proxyface/qmake.pro, qmake.pro: with
+	  qmake
+
+2009-03-17 10:12  
+
+	* makefile.am, proxyface/gui, proxyface/gui/proxy.hxx,
+	  proxyface/gui/proxy.ui, proxyface/qmake.pro: with new proxy
+	  dialog
+
+2009-03-11 15:37  
+
+	* autoproxy.hxx, proxyface/unix.hxx, proxyface/windoze.hxx,
+	  test.cxx: works with comol/updater
+
+2009-03-09 14:16  
+
+	* configure.in: make dist works now
+
+2009-03-09 14:09  
+
+	* AUTHORS, COPYING, ChangeLog, INSTALL, NEWS, README, configure.in,
+	  makefile.am: proper installation
+
+2009-03-09 14:01  
+
+	* autoproxy.hxx, bootstrap.sh, configure.in, makefile.am,
+	  proxyface, proxyface/unix.hxx, proxyface/windoze.hxx, test.cxx,
+	  winhttp.a: first release
+
+2009-03-02 14:13  
+
+	* .: start
+

INSTALL

@@ -1 +1 @@
-/usr/share/automake-1.13/INSTALL
+/usr/share/automake-1.14/INSTALL

README

@@ -1,3 +1,5 @@
+Platform Independent Interface for Network Proxies
+
 Implements a Proxy detection (WPAD) interface for Linux, Mac OSX and
 Windows. Offers a GUI for manual proxy settings and automatic WPAD
 detection. Makes use of http://code.google.com/p/libproxy/ on Linux

ax_check_qt.m4

@@ -27,24 +27,30 @@
 #      data files themselves.
 
 AC_DEFUN([AX_CXX_QT_TOOL], [
-  AC_ARG_VAR([$1], [path to Qt tool $2])
+  if test -z "$HAVE_$1"; then
-  $1=${$1:-$(pkg-config --variable=$2_location Qt5Core)}
+    HAVE_$1=1
-  $1=${$1:-$(pkg-config --variable=host_bins Qt5Core)/$2}
+    AC_MSG_CHECKING([for $2])
-  $1=${$1:-$(pkg-config --variable=$2_location QtCore)}
+    AC_ARG_VAR([$1], [path to Qt tool $2])
-  $1=${$1:-$(pkg-config --variable=host_bins QtCore)/$2}
+    $1=${$1:-$(pkg-config --variable=$2_location Qt5Core)}
-  if ! which "$$1" > /dev/null; then
+    $1=${$1:-$(pkg-config --variable=host_bins Qt5Core)/$2}
-    if which "$2" > /dev/null; then
+    $1=${$1:-$(pkg-config --variable=$2_location QtCore)}
-      $1=$2
+    $1=${$1:-$(pkg-config --variable=host_bins QtCore)/$2}
-    else
+    if ! which "${$1%% *}" > /dev/null; then
-      if test -n "$$1"; then
+      if which "$2" > /dev/null; then
-        AC_MSG_ERROR([Missing Qt program: $2 (tested: $$1)])
+        $1=$2
       else
-        AC_MSG_ERROR([Missing Qt program: $2 (specify variable $1)])
+        HAVE_$1=0
+        $1=""
       fi
     fi
+    AC_SUBST($1)
+    AM_CONDITIONAL(HAVE_$1, test $HAVE_$1 -eq 1)
+    if test $HAVE_$1 -eq 1; then
+      AC_MSG_RESULT([$$1])
+    else
+      AC_MSG_RESULT([not found])
+    fi
   fi
-  AC_SUBST($1)
-  AC_MSG_NOTICE([using $$1 for $2])
 ])
 
 AC_DEFUN([AX_CXX_QT_TOOLS], [
@@ -56,26 +62,87 @@ AC_DEFUN([AX_CXX_QT_TOOLS], [
   AX_CXX_QT_TOOL(LRELEASE, lrelease)
 ])
 
-AC_DEFUN([AX_CXX_CHECK_QT], [
+AC_DEFUN([AX_CHECK_VALID_FLAG], [
+  AC_MSG_CHECKING([m4_default([$2], [for valid flag in "$1"])])
+  save_cxxflags="$CXXFLAGS"
+  newflag="no"
+  for test_flag in $1; do
+    CXXFLAGS+=" ${test_flag}"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [
+      newflag="$test_flag"
+      AM_CXXFLAGS+=" ${test_flag}"
+      CXXFLAGS="$save_cxxflags"
+      break;
+    ])
+    CXXFLAGS="$save_cxxflags"
+  done
+  AC_SUBST(AM_CXXFLAGS)
+  AC_MSG_RESULT([$newflag])
+])
+
+AC_DEFUN([AX_CHECK_QT], [
   qt_modules="$2"
+  qt_modules_optional="$3"
   AX_CXX_QT_TOOLS
   HAVE_$1=0
-  PKG_CHECK_MODULES([$1], [${qt_modules//Qt/Qt5}], [
+  PKG_PROG_PKG_CONFIG
+  PKG_CHECK_MODULES([$1]5, [${qt_modules//Qt/Qt5}], [
     HAVE_$1=1
     AC_DEFINE([HAVE_$1])
-    AM_CPPFLAGS+=" ${$1_CFLAGS}"
+    AM_CPPFLAGS+=" ${[$1]5_CFLAGS}"
-    AM_CXXFLAGS+=" ${$1_CFLAGS}"
+    MOC_FLAGS+=" ${[$1]5_CFLAGS}"
-    LIBS+=" ${$1_LIBS}"
+    AM_CXXFLAGS+=" ${[$1]5_CFLAGS}"
+    LIBS+=" ${[$1]5_LIBS}"
+    if test -n "${qt_modules_optional}"; then
+      PKG_CHECK_MODULES([$1]5_OPTIONAL, [${qt_modules_optional//Qt/Qt5}], [
+        AM_CPPFLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+        MOC_FLAGS+=" -DHAVE_$1=1 ${[$1]5_OPTIONAL_CFLAGS}"
+        AM_CXXFLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+        LIBS+=" ${[$1]5_OPTIONAL_LIBS}"
+      ], [
+        AC_MSG_NOTICE([Not found: ${qt_modules_optional//Qt/Qt5}])
+      ])
+    fi
   ], [
     PKG_CHECK_MODULES([$1], [${qt_modules}], [
       HAVE_$1=1
       AC_DEFINE([HAVE_$1])
       AM_CPPFLAGS+=" ${$1_CFLAGS}"
+      MOC_FLAGS+=" ${$1_CFLAGS}"
       AM_CXXFLAGS+=" ${$1_CFLAGS}"
       LIBS+=" ${$1_LIBS}"
-    ])
+      if test -n "$3"; then
+        PKG_CHECK_MODULES($1_OPTIONAL, [${qt_modules_optional}], [
+          AM_CPPFLAGS+=" ${$1_OPTIONAL_CFLAGS}"
+          MOC_FLAGS+=" -DHAVE_$1=1 ${$1_OPTIONAL_CFLAGS}"
+          AM_CXXFLAGS+=" ${$1_OPTIONAL_CFLAGS}"
+          LIBS+=" ${$1_OPTIONAL_LIBS}"
+        ], [
+          AC_MSG_NOTICE([Not found: ${qt_modules_optional}])
+        ])
+      fi
+    ], [HAVE_$1=0])
   ])
   AM_CONDITIONAL(HAVE_$1, test $HAVE_$1 -eq 1)
+  AX_CHECK_VALID_FLAG([-fPIC -fPIE], [position independent code flag])
   AC_SUBST(AM_CPPFLAGS)
+  AC_SUBST(MOC_FLAGS)
   AC_SUBST(AM_CXXFLAGS)
+  AX_ADDITIONAL_QT_RULES_HACK='
+ui_%.hxx: %.ui
+	$(UIC) -o [$][@] $<
+
+moc_%.cxx: %.hxx
+	$(MOC) $(MOC_FLAGS) -o [$][@] $<
+
+qrc_%.cxx: %.qrc
+	$(RCC) -o [$][@] $<'
+  AC_SUBST(AX_ADDITIONAL_QT_RULES_HACK)
+])
+
+AC_DEFUN([AX_REQUIRE_QT], [
+  AX_CHECK_QT([$1], [$2], [$3])
+  if ! test "$HAVE_$1" -eq 1; then
+     AC_MSG_ERROR([Required Qt modules not found: $2])
+  fi
 ])

ax_init_standard_project.m4

@@ -0,0 +1,310 @@
+## @id $Id$
+
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+m4_define(x_least, m4_esyscmd_s(
+  LEAST="ERROR-UNDEFINED-REVISION-to-be-built-in-subdirectory-of-svn-checkout"
+  for path in . .. ../..; do
+    if svn info $path 2>&1 > /dev/null; then
+      LEAST=$(LANG= svn info $path | sed -n 's/Last Changed Rev: //p')
+      (cd $path && svn2cl)
+      break;
+    fi
+  done
+  echo -n $LEAST
+))
+m4_define(x_bugreport, m4_esyscmd_s(
+  head -1 AUTHORS | \
+    sed -n 's,.*<\([-_.a-z0-9A-Z]*@[-_.a-z0-9A-Z]*\)>.*,\1,gp'
+))
+
+m4_include(ax_check_qt.m4)
+
+AC_ALIAS([AC_DEFINE_DIR], [AX_DEFINE_DIR])
+AC_DEFUN([AX_DEFINE_DIR], [
+  prefix_NONE=
+  exec_prefix_NONE=
+  test "x$prefix" = xNONE && prefix_NONE=yes && prefix=$ac_default_prefix
+  test "x$exec_prefix" = xNONE && exec_prefix_NONE=yes && exec_prefix=$prefix
+dnl In Autoconf 2.60, ${datadir} refers to ${datarootdir}, which in turn
+dnl refers to ${prefix}.  Thus we have to use `eval' twice.
+  eval ax_define_dir="\"[$]$2\""
+  eval ax_define_dir="\"$ax_define_dir\""
+  AC_SUBST($1, "$ax_define_dir")
+  AC_DEFINE_UNQUOTED($1, "$ax_define_dir", [$3])
+  test "$prefix_NONE" && prefix=NONE
+  test "$exec_prefix_NONE" && exec_prefix=NONE
+])
+
+AC_DEFUN([AX_ADD_MAKEFILE_TARGET_DEP], [
+  sh_add_makefile_target_dep() {
+    sed -i ':a;/^'${1}':.*\\$/{N;s/\\\n//;ta};s/^'${1}':.*$/& '${2}'/' "${srcdir}/${3}"
+    if ! egrep -q "${1}:.* ${2}" "${srcdir}/${3}"; then
+        echo "${1}: ${2}" >> "${srcdir}/${3}"
+    fi
+  }
+  sh_add_makefile_target_dep "$1" "$2" "$3"
+  if test "$1" != ".PHONY"; then
+      sh_add_makefile_target_dep ".PHONY" "$2" "$3"
+  fi
+])
+
+AC_DEFUN([AX_INIT_STANDARD_PROJECT], [
+  AC_SUBST(HOME)
+  README=$(tail -n +3 README)
+  DESCRIPTION=$(head -1 README)
+  AUTHOR=$(head -1 AUTHORS)
+  AC_SUBST(AUTHOR)
+  _AM_SUBST_NOTMAKE([AUTHOR])
+  AC_SUBST(DESCRIPTION)
+  _AM_SUBST_NOTMAKE([DESCRIPTION])
+  AC_SUBST(README)
+  _AM_SUBST_NOTMAKE([README])
+  DISTRO=$(lsb_release -sc)
+  AC_SUBST(DISTRO)
+  BUILD_NUMBER=${BUILD_NUMBER:-1}
+  AC_SUBST(BUILD_NUMBER)
+  BUILD_DATE=$(date -R)
+  AC_SUBST(BUILD_DATE)
+  if test -f "${PROJECT_NAME}-logo.png"; then
+     PROJECT_LOGO="${PROJECT_NAME}-logo.png"
+  fi
+  AC_SUBST(PROJECT_LOGO)
+  if test -f "${PROJECT_NAME}-icon.png"; then
+     PROJECT_ICON="${PROJECT_NAME}-icon.png"
+  fi
+  AC_SUBST(PROJECT_ICON)
+  AC_CONFIG_FILES([makefile])
+  AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-standard-project-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-standard-project-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-standard-project-targets], [makefile.in])
+  test -f makefile.in && cat >> makefile.in <<EOF
+#### Begin: Appended by $0
+EXTRA_DIST = bootstrap.sh
+doc_DATA = AUTHORS NEWS README COPYING INSTALL ChangeLog @PACKAGE_NAME@.spec
+clean-standard-project-targets:
+	-rm -rf \${PACKAGE_NAME}-\${PACKAGE_VERSION}
+	-rm \${PACKAGE_TARNAME}-\${PACKAGE_VERSION}.tar.gz
+distclean-standard-project-targets:
+	-rm -r autom4te.cache
+	-rm aclocal.m4 config.guess config.sub configure depcomp compile install-sh ltmain.sh makefile missing mkinstalldirs
+maintainer-clean-standard-project-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_USE_CXX], [
+  m4_include(ax_cxx_compile_stdcxx_11.m4)
+  AC_LANG(C++)
+  AX_CXX_COMPILE_STDCXX_11(noext, optional)
+  AC_PROG_CXX
+  AC_PROG_CPP
+
+  AC_CONFIG_FILES([src/makefile])
+  
+  AM_CPPFLAGS='-I ${top_srcdir}/src -I ${top_builddir}/src -I ${srcdir} -I ${builddir}'
+  AM_LDFLAGS='-L ${top_srcdir}/src -L ${top_builddir}/src'
+
+  # Get rid of that stupid -O2 -g opions!
+  CXXFLAGS="${CXXFLAGS:-}"
+
+# pass compile flags to make distcheck
+  AM_DISTCHECK_CONFIGURE_FLAGS="CXXFLAGS='${CXXFLAGS}' CPPFLAGS='${CPPFLAGS}' CFLAGS='${CFLAGS}' LDFLAGS='${LDFLAGS}'"
+  AC_SUBST(AM_DISTCHECK_CONFIGURE_FLAGS)
+
+  AC_ARG_ENABLE(pedantic,
+    [AS_HELP_STRING([--enable-pedantic],
+                    [enable all warnings and checks, abort on warnings])],
+    [have_pedantic="$enableval"; test "$enableval" = "yes" &&  \
+       AM_CXXFLAGS="${AM_CXXFLAGS:-} -pedantic-errors -Wall -W -Wfloat-equal -Wundef -Wendif-labels -Wpointer-arith -Wcast-align -Wwrite-strings -Wconversion -Wsign-compare -Wmissing-format-attribute -Wno-multichar -Wpacked -Wredundant-decls -Werror -Wshadow -Wcast-qual -Wno-ctor-dtor-privacy"])
+  dnl problem in libs: -Wshadow -Wcast-qual
+  dnl auto.hpp: -Wno-ctor-dtor-privacy (removed)
+  AM_CONDITIONAL(PEDANTIC, test "$enableval" = "yes")
+  if test "$have_pedantic" == "yes"; then
+    AC_MSG_NOTICE([Pedantic compile mode enabled!
+     - all warnings for GNU g++ are enabled
+     - all warnings result in an error
+     - doxygen warnings are treated as error too]); fi
+
+  MINGW32=no
+  MAC=no
+  case $host_os in
+    *mingw32*) MINGW32=yes;;
+    *darwin* | *rhapsody* | *macosx*) MAC=yes;;
+  esac
+  AM_CONDITIONAL(MINGW32, test "$MINGW32" = "yes")
+  AM_CONDITIONAL(MAC, test "$MAC" = "yes")
+  
+  AC_SUBST(AM_CXXFLAGS)
+  AC_SUBST(AM_CPPFLAGS)
+  AC_SUBST(AM_LDFLAGS)
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-cxx-targets], [src/makefile.in])
+  test -f src/makefile.in && cat >> src/makefile.in <<EOF
+#### Begin: Appended by $0
+maintainer-clean-cxx-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_USE_CPPUNIT], [
+  AM_PATH_CPPUNIT([1.0.0], [have_cppunit="yes"], [have_cppunit="no"])
+  # infos and warnings
+  if test "$have_cppunit" = "no"; then
+    AC_MSG_WARN([Missing cppunit development library!
+     - you cannot check the library using "make check"
+     - everything else works perfectly]); fi
+  AC_CONFIG_FILES([test/makefile])
+])
+
+AC_DEFUN([AX_BUILD_EXAMPLES], [
+  AC_CONFIG_FILES([examples/makefile])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-example-targets], [examples/makefile.in])
+  test -f examples/makefile.in && cat >> examples/makefile.in <<EOF
+#### Begin: Appended by $0
+maintainer-clean-example-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_USE_LIBTOOL], [
+  # libtool versioning
+  LIB_MAJOR=m4_eval(x_major+x_minor)
+  LIB_MINOR=x_least
+  LIB_LEAST=x_minor
+  LIB_VERSION="${LIB_MAJOR}:${LIB_MINOR}:${LIB_LEAST}"
+  AM_LDFLAGS="-version-info ${LIB_VERSION}"
+  AC_SUBST(AM_LDFLAGS)
+  AC_SUBST(LIB_VERSION)
+  AC_PROG_LIBTOOL
+  AC_CONFIG_FILES([src/${PACKAGE_NAME}.pc])
+  AX_ADD_MAKEFILE_TARGET_DEP([install-data-am], [install-data-libtool-pkg], [src/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([uninstall-am], [uninstall-data-am], [src/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([uninstall-data-am], [uninstall-data-libtool-pkg], [src/makefile.in])
+  test -f src/makefile.in && cat >> src/makefile.in <<EOF
+#### Begin: Appended by $0
+install-data-libtool-pkg:
+	test -d \$(DESTDIR)\${libdir}/pkgconfig || mkdir -p \$(DESTDIR)\${libdir}/pkgconfig
+	chmod -R u+w \$(DESTDIR)\${libdir}/pkgconfig
+	cp \${PACKAGE_NAME}.pc \$(DESTDIR)\${libdir}/pkgconfig/
+uninstall-data-libtool-pkg:
+	-chmod -R u+w \$(DESTDIR)\${libdir}/pkgconfig
+	-rm -f \$(DESTDIR)\${libdir}/pkgconfig/\${PACKAGE_NAME}.pc
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_USE_DEBIAN_PACKAGING], [
+  README_DEB=$(tail -n +3 README | sed -e 's/^$/./g' -e 's/^/ /g')
+  AC_SUBST(README_DEB)
+  _AM_SUBST_NOTMAKE([README_DEB])
+  AC_CONFIG_FILES([debian/changelog debian/control])
+  AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-debian-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-debian-targets], [makefile.in])
+  test -f makefile.in && cat >> makefile.in <<EOF
+#### Begin: Appended by $0
+EXTRA_DIST += debian
+clean-debian-targets:
+	-rm -rf \${PACKAGE_NAME}_\${PACKAGE_VERSION}~\${DISTRO}.\${BUILD_NUMBER}.{dsc,tar.gz} \${PACKAGE_NAME}_\${PACKAGE_VERSION}~\${DISTRO}.\${BUILD_NUMBER}*.changes \$\$(sed -n 's,Package: \(.*\),\1_${PACKAGE_VERSION}~${DISTRO}.${BUILD_NUMBER}*.deb,p;' debian/control)
+deb: distdir
+	cd \${PACKAGE_NAME}-\${PACKAGE_VERSION} && ( export CFLAGS="\${CFLAGS}"; export CPPFLAGS="\${CPPFLAGS}"; export  CXXFLAGS="\${CXXFLAGS}"; export LDFLAGS="\${LDFLAGS}"; export DEB_CFLAGS_APPEND="\${CFLAGS}"; export DEB_CPPFLAGS_APPEND="\${CPPFLAGS}"; export  DEB_CXXFLAGS_APPEND="\${CXXFLAGS}"; export  DEB_LDFLAGS_APPEND="\${LDFLAGS}"; dpkg-buildpackage )
+distclean-debian-targets:
+	-rm debian/changelog debian/control
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_USE_RPM_PACKAGING], [
+#  m4_include(ax_rpm_rules.m4)
+  AC_CONFIG_FILES([${PACKAGE_NAME}.spec])
+  #AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-debian-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([.PHONY], [rpm], [makefile.in])
+  test -f makefile.in && cat >> makefile.in <<EOF
+#### Begin: Appended by $0
+rpm: dist
+	rpmbuild -ba --define "_topdir \$(pwd)" --define "_sourcedir \$(pwd)" \${PACKAGE_NAME}.spec
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_USE_DOXYGEN], [
+  AC_CHECK_PROG(have_doxygen, doxygen, yes, no)
+  AC_CHECK_PROG(have_dot, dot, yes, no)
+  AC_CHECK_PROG(have_mscgen, mscgen, yes, no)
+  PDF_DOC=${PACKAGE_NAME}-${PACKAGE_VERSION}.pdf
+  AC_SUBST(PDF_DOC)
+  if test "$have_doxygen" = "no"; then
+    AC_MSG_WARN([Missing program doxygen!
+     - you cannot rebuild the documentation
+     - there are precompiled derived files in the distribution]); fi
+  if test "$have_dot" = "no"; then
+    AC_MSG_WARN([Missing program dot!
+     - when you rebild documentation, there are no generated images
+     - there are precompiled derived files in the distribution]); fi
+  if test "$have_mscgen" = "no"; then
+    AC_MSG_WARN([Missing program mscgen!
+     - when you rebild documentation, there are no message state charts
+     - there are precompiled derived files in the distribution]); fi
+  AC_CONFIG_FILES([doc/makefile doc/doxyfile])
+  AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([install-data-am], [install-data-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([uninstall-am], [uninstall-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([all], [doc], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([.PHONY], [pdf], [doc/makefile.in])
+  test -f doc/makefile.in && cat >> doc/makefile.in <<EOF
+#### Begin: Appended by $0
+doc: doxyfile
+	doxygen doxyfile
+@PEDANTIC_TRUE@	test \! -s doxygen.errors
+
+clean-documentation:
+	-rm doxygen.errors @PDF_DOC@
+distclean-documentation:
+	-rm -r html latex
+	-rm  @PACKAGE_NAME@.doxytag
+maintainer-clean-documentation:
+	-rm makefile.in
+install-data-documentation:
+	test -d \$(DESTDIR)\${docdir} || mkdir -p \$(DESTDIR)\${docdir}
+	chmod -R u+w \$(DESTDIR)\${docdir}
+	cp -r html \$(DESTDIR)\${docdir}/
+uninstall-documentation:
+	-chmod -R u+w \$(DESTDIR)\${docdir}
+	-rm -rf \$(DESTDIR)\${docdir}/*
+#### End: $0
+EOF
+])
+
+AC_DEFUN([AX_PKG_REQUIRE], [
+  PKG_PROG_PKG_CONFIG
+  PKG_CHECK_MODULES([$1], [$1], [
+    AM_CPPFLAGS+=" ${$1_CFLAGS}"
+    AM_CXXFLAGS+=" ${$1_CFLAGS}"
+    LIBS+=" ${$1_LIBS}"
+  ], [
+    AC_MSG_ERROR([Required package $1 not found])
+  ])
+  AC_SUBST(AM_CPPFLAGS)
+  AC_SUBST(AM_CXXFLAGS)
+])
+
+AC_DEFUN([AX_PKG_CHECK], [
+  PKG_PROG_PKG_CONFIG
+  PKG_CHECK_MODULES([$1], [m4_default([$2], [$1])], [
+    HAVE_$1=1
+    AM_CPPFLAGS+=" ${$1_CFLAGS}"
+    AM_CXXFLAGS+=" ${$1_CFLAGS}"
+    LIBS+=" ${$1_LIBS}"
+  ], [
+    HAVE_$1=0
+  ])
+  AM_CONDITIONAL(HAVE_$1, test $HAVE_$1 -eq 1)
+  AC_SUBST(HAVE_$1)
+  AC_SUBST(AM_CPPFLAGS)
+  AC_SUBST(AM_CXXFLAGS)
+])

bootstrap.sh

@@ -1,5 +1,4 @@
-#! /bin/sh
+#! /bin/bash
-
 ## @file
 ##
 ## $Id$
@@ -15,5 +14,306 @@
 ## added file header
 ##
 
-test -f makefile && make distclean
+configure=0
-aclocal && libtoolize --force && automake -a && autoconf
+while test $# -gt 0; do
+    case "$1" in
+        (--configure|-c) configure=1;;
+        (*) break;;
+    esac
+    shift;
+done
+
+
+MY_NAME=${0##*/}
+PROJECT_PATH=$(pwd)
+DEFAULT_PROJECT_NAME=${PROJECT_PATH##*/}
+
+HEADER='## @id $Id$
+#
+# This file has been added by '${MY_NAME}' on '$(date -R)'
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+'
+
+run() {
+    check=1
+    while test $# -gt 0; do
+        case "$1" in
+            (--no-check) check=0;;
+            (*) break;;
+        esac
+        shift;
+    done
+    echo -en "\e[1m-> running:\e[0m $* ..."
+    result=$($* 2>&1)
+    res=$?
+    if test $res -ne 0; then
+        if test $check -eq 1; then
+            echo -e " \e[31merror\e[0m"
+            echo -e "\e[1m*** Failed with return code: $res\e[0m"
+            if test -n "$result"; then
+                echo "$result"
+            fi
+            exit 1
+        else
+            echo -e " \e[33mignored\e[0m"
+        fi
+    else
+        echo -e " \e[32msuccess\e[0m"
+    fi
+}
+
+testtag() {
+    egrep -q '^ *'"$1" configure.ac
+}
+
+checkdir() {
+    if ! test -d "$1"; then # create path
+        run mkdir -p "$1"
+        run svn add "$1"
+    fi
+}
+
+to() {
+    while test $# -gt 0; do
+        case "$1" in
+            (--condition) shift # test for a tag, abort if not set
+                if ! testtag "$1" configure.ac; then
+                    return
+                fi;;
+            (*) break;;
+        esac
+        shift;
+    done
+    if test -f "$1"; then # file already exists
+        return
+    fi
+    checkdir "$(dirname ${1})"
+    echo -en "\e[1m-> generating:\e[0m $1 ..."
+    result=$(cat > "$1" 2>&1)
+    res=$?
+    if test $res -ne 0; then
+        echo -e " \e[31merror\e[0m"
+        echo -e "\e[1m*** Failed with return code: $res\e[0m"
+        if test -n "$result"; then
+            echo "$result"
+        fi
+        exit 1
+    else
+        echo -e " \e[32msuccess\e[0m"
+    fi
+    run svn add "$1"
+    run svn propset svn:keywords "Id" "$1"
+}
+
+copy() {
+    if ! test -f "$1"; then
+        run cp "${0%/*}/$1" "$1"
+        run svn add "$1"
+        run svn propset svn:keywords "Id" "$1"
+    fi
+}
+
+doxyreplace() {
+    echo -en "\e[1m-> doxyfile:\e[0m configure $1 ..."
+    if sed -i 's|\(^'"$1"' *=\) *|\1'" $2"'|g' doc/doxyfile.in; then
+        echo -e " \e[32msuccess\e[0m"
+    else
+        echo -e " \e[31merror\e[0m"
+        echo -e "\e[1m**** command: sed -i 's|\(^'"$1"' *=\) *|\1'" $2"'|g' doc/doxyfile.in;\e[0m"
+        exit 1
+    fi
+}
+
+# Initialize the environment:
+copy ${MY_NAME}
+copy ax_init_standard_project.m4
+copy ax_cxx_compile_stdcxx_11.m4
+copy ax_check_qt.m4
+copy AUTHORS
+if ! test -f configure.ac; then
+    to configure.ac <<EOF
+${HEADER}m4_define(x_package_name, ${DEFAULT_PROJECT_NAME}) # project's name
+m4_define(x_major, 0) # project's major version
+m4_define(x_minor, 0) # project's minor version
+m4_include(ax_init_standard_project.m4)
+AC_INIT(x_package_name, x_major.x_minor.x_least, x_bugreport, x_package_name)
+AM_INIT_AUTOMAKE([1.9 tar-pax])
+AX_INIT_STANDARD_PROJECT
+
+# requirements, uncomment, what you need:
+#AX_USE_CXX
+#AX_USE_LIBTOOL
+#AX_USE_DOXYGEN
+#AX_USE_DEBIAN_PACKAGING
+#AX_USE_RPM_PACKAGING
+#AX_USE_CPPUNIT
+#AX_BUILD_EXAMPLES
+
+# create output
+AC_OUTPUT
+EOF
+    echo "please edit configure.ac, then rerun $0"
+    exit 0
+fi
+PACKAGE_NAME=$(sed -n 's/.*m4_define *( *x_package_name *, *\([^ ]*\) *).*/\1/p' configure.ac)
+echo "${HEADER}" | to --condition AX_USE_CXX src/makefile.am
+echo "${HEADER}" | to --condition AX_USE_DOXYGEN doc/makefile.am
+to --condition AX_USE_CPPUNIT test/makefile.am <<EOF
+${HEADER}AM_CPPFLAGS = -I${top_srcdir}/src -I${top_builddir}/src
+AM_LDFLAGS = -L${top_builddir}/src/.libs
+LDADD = -l${PACKAGE_NAME}
+EOF
+to --condition AX_BUILD_EXAMPLES examples/makefile.am <<EOF
+${HEADER}AM_CPPFLAGS = -I${top_srcdir}/src -I${top_builddir}/src
+AM_LDFLAGS = -L${top_builddir}/src/.libs
+LDADD = -l${PACKAGE_NAME}
+EOF
+if testtag AX_USE_DOXYGEN && ! test -f doc/doxyfile.in; then
+    run doxygen -g doc/doxyfile.in
+    doxyreplace PROJECT_NAME "@PACKAGE_NAME@"
+    doxyreplace PROJECT_NUMBER "@PACKAGE_VERSION@"
+    doxyreplace PROJECT_BRIEF "@DESCRIPTION@"
+    doxyreplace PROJECT_LOGO "@PROJECT_LOGO@"
+    doxyreplace INLINE_INHERITED_MEMB YES
+    doxyreplace MULTILINE_CPP_IS_BRIEF YES
+    doxyreplace TAB_SIZE 2
+    doxyreplace ALIASES '"id=\par File-ID\n" "copy=\par Copyright\n" "license=\par License\n" "classmutex=\par Reentrant:\nAccess is locked with class static mutex @c " "instancemutex=\par Reentrant:\nAccess is locked with per instance mutex @c " "mutex=\par Reentrant:\nAccess is locked with mutex @c "'
+    doxyreplace BUILTIN_STL_SUPPORT YES
+    doxyreplace DISTRIBUTE_GROUP_DOC YES
+    doxyreplace EXTRACT_ALL YES
+    doxyreplace EXTRACT_PRIVATE YES
+    doxyreplace EXTRACT_STATIC YES
+    doxyreplace EXTRACT_LOCAL_CLASSES YES
+    doxyreplace EXTRACT_LOCAL_METHODS YES
+    doxyreplace EXTRACT_ANON_NSPACES YES
+    doxyreplace SORT_MEMBERS_CTORS_1ST YES
+    doxyreplace WARN_IF_UNDOCUMENTED NO
+    doxyreplace WARN_LOGFILE doxygen.errors
+    doxyreplace INPUT "@top_srcdir@/src"
+    doxyreplace RECURSIVE YES
+    doxyreplace EXCLUDE_PATTERNS "moc_* uic_* qrc_*"
+    if testtag AX_BUILD_EXAMPLES; then
+        doxyreplace EXAMPLE_PATH @top_srcdir@/examples
+    fi
+    doxyreplace EXAMPLE_RECURSIVE YES
+    doxyreplace SOURCE_BROWSER YES
+    doxyreplace INLINE_SOURCES YES
+    doxyreplace GENERATE_TREEVIEW NO
+    doxyreplace SEARCHENGINE YES
+    doxyreplace GENERATE_HTML YES
+    doxyreplace GENERATE_LATEX NO
+    doxyreplace LATEX_BATCHMODE YES
+    doxyreplace LATEX_HIDE_INDICES YES
+    doxyreplace COMPACT_RTF YES
+    doxyreplace RTF_HYPERLINKS YES
+    doxyreplace GENERATE_TAGFILE "@PACKAGE_NAME@.doxytag"
+    doxyreplace HIDE_UNDOC_RELATIONS NO
+    doxyreplace HAVE_DOT YES
+    doxyreplace CLASS_GRAPH YES
+    doxyreplace TEMPLATE_RELATIONS YES
+    doxyreplace DOT_IMAGE_FORMAT svg
+    doxyreplace INTERACTIVE_SVG YES
+    doxyreplace DOT_TRANSPARENT YES
+fi
+if testtag AX_USE_DEBIAN_PACKAGING; then
+    checkdir debian
+    to debian/changelog.in <<EOF
+@PACKAGE@ (@PACKAGE_VERSION@~@DISTRO@.@BUILD_NUMBER@) @DISTRO@; urgency=low
+
+  * Please see ChangeLog of @PACKAGE@
+
+ -- @AUTHOR@  @BUILD_DATE@
+EOF
+    to debian/control.in <<EOF
+Source: @PACKAGE_NAME@
+Priority: extra
+Maintainer: @AUTHOR@
+Build-Depends: debhelper, pkg-config, autotools-dev, lsb-release $(if testtag AX_USE_DOXYGEN; then echo -n ", doxygen, graphviz"; fi; if testtag AX_USE_CPPUNIT; then echo -n ", libcppunit-dev"; fi; if testtag AX_CXX_QT || testtag AX_CXX_CHECK_QT; then echo -n ", qtbase5-dev | libqt4-dev, qtbase5-dev-tools | qt4-dev-tools"; fi)
+
+Package: @PACKAGE_NAME@
+$(if testtag AX_USE_LIBTOOL; then echo "Section: libs"; fi)
+Architecture: any
+Depends: \${shlibs:Depends}, \${misc:Depends}
+Description: @DESCRIPTION@
+@README_DEB@
+$(      if testtag AX_USE_LIBTOOL; then
+            cat <<EOF2
+
+Package: @PACKAGE_NAME@-dev
+Section: libdevel
+Architecture: any
+Depends: @PACKAGE_NAME@ (= \${binary:Version})
+Description: @DESCRIPTION@ - Development Package
+@README_DEB@
+EOF2
+          fi)
+EOF
+    to debian/docs <<EOF
+NEWS
+README
+EOF
+    to debian/${PACKAGE_NAME}.install <<EOF
+usr/bin/*
+usr/lib/lib*.so.*
+EOF
+    to debian/${PACKAGE_NAME}.dirs <<EOF
+usr/lib
+EOF
+    if testtag AX_USE_LIBTOOL; then
+        to debian/${PACKAGE_NAME}-dev.install <<EOF
+usr/include/*
+usr/lib/lib*.a
+usr/lib/lib*.so
+usr/lib/pkgconfig/*
+usr/lib/*.la
+EOF
+        to debian/${PACKAGE_NAME}-dev.dirs <<EOF
+usr/lib
+usr/include
+EOF
+    fi
+    to debian/rules <<EOF
+${HEADER}%:
+	dh \$@
+EOF
+    echo 7 | to debian/compat
+fi
+if ! test -f makefile.am; then
+    SUBDIRS=""
+    for d in src test doc examples; do
+        test -d $d && SUBDIRS="${SUBDIRS} $d"
+    done
+    echo "${HEADER}SUBDIRS =${SUBDIRS}" | to makefile.am
+fi
+to --condition AX_USE_LIBTOOL src/${PACKAGE_NAME}.pc.in <<EOF
+${HEADER}prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: @PACKAGE_NAME@
+Description: @DESCRIPTION@
+Version: @VERSION@
+Libs: -L${libdir} -l@PACKAGE_NAME@ @LDFLAGS@
+Cflags: -I${includedir} @CPPFLAGS@
+EOF
+
+#### Cleanup If Makefile Exists ####
+if test -f makefile; then
+    run --no-check make distclean
+fi
+
+#### Bootstrap Before Configure ####
+run aclocal
+run libtoolize --force
+run automake -a
+run autoconf
+
+#### Run Configure If User Requires ####
+if test "$configure" -eq 1; then
+    ./configure $*
+fi

configure.ac

@@ -0,0 +1,34 @@
+## @id $Id$
+#
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 09:14:42 +0100
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+m4_define(x_package_name, proxyface) # project's name
+m4_define(x_major, 1) # project's major version
+m4_define(x_minor, 1) # project's minor version
+m4_include(ax_init_standard_project.m4)
+AC_INIT(x_package_name, x_major.x_minor.x_least, x_bugreport, x_package_name)
+AM_INIT_AUTOMAKE([1.9 tar-pax])
+AX_INIT_STANDARD_PROJECT
+
+# requirements, uncomment, what you need:
+AX_USE_CXX
+AX_USE_LIBTOOL
+AX_USE_DOXYGEN
+AX_USE_DEBIAN_PACKAGING
+AX_USE_RPM_PACKAGING
+#AX_USE_CPPUNIT
+AX_BUILD_EXAMPLES
+
+AX_CHECK_QT([QT], [QtNetwork QtGui], [QtWidgets])
+AX_PKG_CHECK([PROXY], [libproxy-1.0])
+
+if test "$HAVE_QT" -eq 0 -a "$HAVE_PROXY" -eq 0; then
+   AC_MSG_ERROR([Either Qt or Google Proxy is required.])
+fi
+
+# create output
+AC_OUTPUT

configure.in

@@ -1,184 +0,0 @@
-# $Id$
-m4_include(ax_cxx_compile_stdcxx_11.m4)
-m4_include(ax_check_qt.m4)
-AC_ALIAS([AC_DEFINE_DIR], [AX_DEFINE_DIR])
-AC_DEFUN([AX_DEFINE_DIR], [
-  prefix_NONE=
-  exec_prefix_NONE=
-  test "x$prefix" = xNONE && prefix_NONE=yes && prefix=$ac_default_prefix
-  test "x$exec_prefix" = xNONE && exec_prefix_NONE=yes && exec_prefix=$prefix
-dnl In Autoconf 2.60, ${datadir} refers to ${datarootdir}, which in turn
-dnl refers to ${prefix}.  Thus we have to use `eval' twice.
-  eval ax_define_dir="\"[$]$2\""
-  eval ax_define_dir="\"$ax_define_dir\""
-  AC_SUBST($1, "$ax_define_dir")
-  AC_DEFINE_UNQUOTED($1, "$ax_define_dir", [$3])
-  test "$prefix_NONE" && prefix=NONE
-  test "$exec_prefix_NONE" && exec_prefix=NONE
-])
-
-AC_INIT([README])
-SRC_DIR=src
-TST_DIR=
-DOC_DIR=doc
-
-m4_define(x_packagename, proxyface)
-m4_define(x_major, 1)
-m4_define(x_minor, 0)
-PACKAGENAME=x_packagename
-MAJOR=x_major
-MINOR=x_minor
-BUILDDATE=$(date "+%d.%m.%Y/%H.%M")
-
-if svn info . 2>&1 > /dev/null; then
-    LEAST=$(LANG= svn info $path | sed -n 's/Revision: //p')
-    break;
-else
-    LEAST=[$(pwd | sed -n 's,^.*/'${PACKAGENAME}'-'${MAJOR}'\.'${MINOR}'\.\([0-9]*\).*$,\1,p')]
-    if test -z "${LEAST}"; then
-        LEAST="ERROR_CANNOT_DETERMINE_REVISION_NUMBER from $(pwd)"
-    fi
-fi
-
-AM_INIT_AUTOMAKE($PACKAGENAME, $MAJOR.$MINOR.$LEAST, [marc@waeckerlin.org])
-
-# files to create
-AC_CONFIG_FILES([makefile ${PACKAGENAME}.spec src/version.cxx
-                 src/makefile examples/makefile
-                 doc/doxyfile doc/makefile
-                 src/${PACKAGENAME}.pc debian/changelog])
-
-# copy M4 to shell
-AC_SUBST(MAJOR)
-AC_SUBST(MINOR)
-AC_SUBST(LEAST)
-AC_SUBST(BUILDDATE)
-
-# libtool versioning
-LIB_MAJOR=m4_eval(x_major+x_minor)
-LIB_MINOR=${LEAST}
-LIB_LEAST=x_minor
-LIB_VERSION="${LIB_MAJOR}:${LIB_MINOR}:${LIB_LEAST}"
-AC_SUBST(LIB_VERSION)
-
-# home
-AC_SUBST(HOME)
-
-# datadir for languages
-AX_DEFINE_DIR([DATADIR], [datadir])
-#AC_SUBST(DATADIR)
-
-# macros
-README=README
-AC_SUBST_FILE(README)
-CHANGE_LOG=ChangeLog
-AC_SUBST_FILE(CHANGE_LOG)
-
-LIBS="${LIBS}"
-CPPFLAGS="${CPPFLAGS} -DPACKAGEVERSION='\"${VERSION}\"' -DPACKAGENAME='\"${PACKAGENAME}\"'"
-
-# Get rid of that stupid -O2 -g opions!
-CXXFLAGS="${CXXFLAGS:-}"
-
-# languages
-AC_LANG(C++)
-
-# programs
-AC_PROG_CXX
-AC_PROG_CPP
-AC_PROG_INSTALL
-AC_PROG_LN_S
-AC_PROG_MAKE_SET
-AC_PROG_LIBTOOL
-AC_CHECK_PROG(have_doxygen, doxygen, yes, no)
-AC_CHECK_PROG(have_dot, dot, yes, no)
-PKG_PROG_PKG_CONFIG
-
-# libraries
-case $host in
-  (*mac*|*darwin*)
-    PKG_CHECK_MODULES([PROXY], [libproxy-1.0],
-                      [LIBS+=" ${PROXY_LIBS}"
-                       CXXFLAGS+=" ${PROXY_CFLAGS}"
-                       CPPFLAGS+=" ${PROXY_CFLAGS}"
-                       have_proxy=1])
-    ;;
-  (*mingw*|*win*)
-    LIBS+=" -lwinhttp"
-    CPPFLAGS+=" -DQ_OS_WIN32"
-    ;;
-  (*)
-    PKG_CHECK_MODULES([PROXY], [libproxy-1.0],
-                      [LIBS+=" ${PROXY_LIBS}"
-                       CXXFLAGS+=" ${PROXY_CFLAGS}"
-                       CPPFLAGS+=" ${PROXY_CFLAGS}"
-                       have_proxy=1])
-    ;;
-esac
-AX_CXX_CHECK_QT([QT], [Qt5Core Qt5Gui Qt5Widgets Qt5Network])
-AC_ARG_VAR(LUPDATE_ARGS, [arguments for qt lupdate command, e.g. -no-obsolete])
-if test $HAVE_QT -eq 1; then
-  CPPFLAGS+=" -DQT_NETWORK_LIB"
-fi
-
-AC_ARG_ENABLE(pedantic,
-  [AS_HELP_STRING([--enable-pedantic],
-                  [enable all warnings and checks, abort on warnings])],
-  [have_pedantic="$enableval"; test "$enableval" = "yes" &&  \
-     CXXFLAGS+=" -pedantic-errors -Wall -W -Wfloat-equal -Wundef -Wendif-labels -Wpointer-arith -Wcast-align -Wwrite-strings -Wconversion -Wsign-compare -Wmissing-format-attribute -Wno-multichar -Wpacked -Wredundant-decls -Werror -Wshadow -Wcast-qual -Wno-ctor-dtor-privacy"])
-dnl problem in libs: -Wshadow -Wcast-qual
-dnl auto.hpp: -Wno-ctor-dtor-privacy (removed)
-AM_CONDITIONAL(PEDANTIC, test "$enableval" = "yes")
-AC_ARG_ENABLE(dot,
-  [AS_HELP_STRING([--disable-dot],
-                  [disable dot graphic tools for documentation])],
-  [have_dot="$enableval"])
-test "$enableval" = "yes" && HAVE_DOT="YES" || HAVE_DOT="NO";
-AM_PATH_CPPUNIT([1.0.0], [have_cppunit="yes"], [have_cppunit="no"])
-
-MINGW32=no
-MAC=no
-case $host_os in
-  *mingw32*) MINGW32=yes;;
-  *darwin* | *rhapsody* | *macosx*) MAC=yes;;
-esac
-AM_CONDITIONAL(MINGW32, test "$MINGW32" = "yes")
-AM_CONDITIONAL(MAC, test "$MAC" = "yes")
-
-# author for signing packages
-if test -z "$PACKAGERID"; then
-   PACKAGERID="Marc Wäckerlin (http://marc.waeckerlin.org) <marc@waeckerlin.org>"
-fi
-AC_ARG_VAR(PACKAGERID, [Signature identification of the package author.])
-BUILDDATE=$(date --rfc-2822)
-
-# export macros
-SRCDIR=${srcdir}
-AC_SUBST(SRCDIR)
-AC_SUBST(SRC_DIR)
-AC_SUBST(TST_DIR)
-AC_SUBST(DOC_DIR)
-AC_SUBST(HAVE_DOT)
-AC_SUBST(THREADS)
-AC_SUBST(PACKAGENAME)
-
-# create output
-AC_OUTPUT
-# infos and warnings
-if test "$have_doxygen" = "no"; then
-AC_MSG_WARN([Missing program doxygen!
-  - you cannot rebuild the documentation with make doc
-  - there are precompiled derived files in the distribution]); fi
-if test "$have_dot" = "no"; then
-AC_MSG_WARN([Missing program dot!
-  - when you rebild documentation with make doc, there are no generated images
-  - there are precompiled derived files in the distribution]); fi
-if test "$have_cppunit" = "no"; then
-AC_MSG_WARN([Missing cppunit development library!
-  - you cannot check the library using "make check"
-  - everything else works perfectly]); fi
-if test "$have_pedantic" == "yes"; then
-AC_MSG_NOTICE([Pedantic compile mode enabled!
-  - all warnings for GNU g++ are enabled
-  - all warnings result in an error
-  - doxygen warnings are treated as error too]); fi

debian/changelog.in

@@ -1,5 +1,5 @@
-@PACKAGE@ (@VERSION@-1) unstable; urgency=low
+@PACKAGE@ (@PACKAGE_VERSION@~@DISTRO@.@BUILD_NUMBER@) @DISTRO@; urgency=low
 
-  * see https://dev.swisssign.com/projects/proxyface for changes
+  * Please see ChangeLog of @PACKAGE@
 
- -- Marc Wäckerlin (SwissSign AG) <marc.waeckerlin@tech.swisssign.com>  Wed, 07 Apr 2010 10:23:02 +0200
+ -- @AUTHOR@  @BUILD_DATE@

debian/control

@@ -1,21 +0,0 @@
-Source: proxyface
-Priority: extra
-Maintainer: Marc Wäckerlin (SwissSign AG) <marc.waeckerlin@tech.swisssign.com>
-Build-Depends: debhelper (>= 7), autotools-dev
-Standards-Version: 3.8.1
-Section: libs
-Homepage: https://dev.swisssign.com/projects/proxyface
-
-Package: proxyface-dev
-Section: libdevel
-Architecture: any
-Depends: proxyface (= ${binary:Version})
-Description: proxyface
- .
-
-Package: proxyface
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: proxyface
- .

debian/control.in

@@ -0,0 +1,18 @@
+Source: @PACKAGE_NAME@
+Priority: extra
+Maintainer: @AUTHOR@
+Build-Depends: debhelper, pkg-config, autotools-dev, lsb-release , doxygen, graphviz
+
+Package: @PACKAGE_NAME@
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: @DESCRIPTION@
+@README_DEB@
+
+Package: @PACKAGE_NAME@-dev
+Section: libdevel
+Architecture: any
+Depends: @PACKAGE_NAME@ (= ${binary:Version})
+Description: @DESCRIPTION@ - Development Package
+@README_DEB@

debian/copyright

@@ -1,26 +0,0 @@
-This package was debianized by Marc Wäckerlin (SwissSign AG) <marc.waeckerlin@tech.swisssign.com> on
-Wed, 07 Apr 2010 10:23:02 +0200.
-
-It was downloaded from https://dev.swisssign.com/projects/proxyface
-
-Upstream Author(s):
-
-    Marc Wäckerlin (SwissSign AG) <marc.waeckerlin@tech.swisssign.com>
-
-Copyright:
-
-    Marc Wäckerlin (SwissSign AG) <marc.waeckerlin@tech.swisssign.com>
-
-License:
-
-    LGPL version 3
-
-The Debian packaging is:
-
-    Copyright (C) 2010 Marc Wäckerlin (SwissSign AG) <marc.waeckerlin@tech.swisssign.com>
-
-and is licensed under the GPL version 3, 
-see `/usr/share/common-licenses/GPL-3'.
-
-# Please also look if there are files or directories which have a
-# different copyright/license attached and list them here.

debian/proxyface-dev.dirs

@@ -1,3 +1,2 @@
 usr/lib
-usr/share/proxyface
 usr/include

debian/proxyface-dev.install

@@ -3,5 +3,4 @@ usr/lib/lib*.a
 usr/lib/lib*.so
 usr/lib/pkgconfig/*
 usr/lib/*.la
-usr/share/pkgconfig/*
+
-usr/share/proxyface/*

debian/proxyface.doc-base.EX

@@ -1,20 +0,0 @@
-Document: proxyface
-Title: Debian proxyface Manual
-Author: <insert document author here>
-Abstract: This manual describes what proxyface is
- and how it can be used to
- manage online manuals on Debian systems.
-Section: unknown
-
-Format: debiandoc-sgml
-Files: /usr/share/doc/proxyface/proxyface.sgml.gz
-
-Format: postscript
-Files: /usr/share/doc/proxyface/proxyface.ps.gz
-
-Format: text
-Files: /usr/share/doc/proxyface/proxyface.text.gz
-
-Format: HTML
-Index: /usr/share/doc/proxyface/html/index.html
-Files: /usr/share/doc/proxyface/html/*.html

debian/rules

@@ -1,95 +1,10 @@
-#!/usr/bin/make -f
+## @id $Id$
-# -*- makefile -*-
+#
-# Sample debian/rules that uses debhelper.
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 14:21:46 +0100
-# This file was originally written by Joey Hess and Craig Small.
+# Feel free to change it or even remove and rebuild it, up to your needs
-# As a special exception, when this file is copied by dh-make into a
+#
-# dh-make output file, you may use that output file without restriction.
+##       1         2         3         4         5         6         7         8
-# This special exception was added by Craig Small in version 0.37 of dh-make.
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
 
-# Uncomment this to turn on verbose mode.
+%:
-#export DH_VERBOSE=1
+	dh $@
-
-
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE))
-CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
-else
-CROSS= --build $(DEB_BUILD_GNU_TYPE)
-endif
-
-
-
-config.status: configure
-	dh_testdir
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
-	cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
-	cp -f /usr/share/misc/config.guess config.guess
-endif
-	./configure $(CROSS) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS)" MOC=/usr/bin/moc
-
-
-build: build-stamp
-
-build-stamp:  config.status 
-	dh_testdir
-	$(MAKE)
-	touch $@
-
-clean: 
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp 
-	[ ! -f [Mm]akefile ] || $(MAKE) distclean
-	rm -f config.sub config.guess
-	dh_clean 
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_prep  
-	dh_installdirs
-	$(MAKE) prefix=$(CURDIR)/debian/tmp/usr install
-
-
-# Build architecture-independent files here.
-binary-indep: install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: install
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs ChangeLog
-	dh_installdocs
-	dh_installexamples
-	dh_install
-#	dh_installmenu
-#	dh_installdebconf
-#	dh_installlogrotate
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installmime
-#	dh_python
-#	dh_installinit
-#	dh_installcron
-#	dh_installinfo
-	dh_installman
-	dh_link
-	dh_strip
-	dh_compress
-	dh_fixperms
-#	dh_perl
-	dh_makeshlibs
-	dh_installdeb
-	dh_shlibdeps
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install 

debian/shlibs.local.ex

@@ -1 +0,0 @@
-libproxyface 1.0.34 proxyface (>> 1.0.34-0), proxyface (<< 1.0.34-99)

debian/watch.ex

@@ -1,23 +0,0 @@
-# Example watch control file for uscan
-# Rename this file to "watch" and then you can run the "uscan" command
-# to check for upstream updates and more.
-# See uscan(1) for format
-
-# Compulsory line, this is a version 3 file
-version=3
-
-# Uncomment to examine a Webpage
-# <Webpage URL> <string match>
-#http://www.example.com/downloads.php proxyface-(.*)\.tar\.gz
-
-# Uncomment to examine a Webserver directory
-#http://www.example.com/pub/proxyface-(.*)\.tar\.gz
-
-# Uncommment to examine a FTP server
-#ftp://ftp.example.com/pub/proxyface-(.*)\.tar\.gz debian uupdate
-
-# Uncomment to find new files on sourceforge, for devscripts >= 2.9
-# http://sf.net/proxyface/proxyface-(.*)\.tar\.gz
-
-# Uncomment to find new files on GooglePages
-# http://example.googlepages.com/foo.html proxyface-(.*)\.tar\.gz

doc/doxyfile.in

@@ -1,1687 +0,0 @@
-# Doxyfile 1.7.3
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a hash (#) is considered a comment and will be ignored.
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = "Projektdokumentation @PACKAGENAME@"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER         = "Version @MAJOR@.@MINOR@.@LEAST@"
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is
-# included in the documentation. The maximum height of the logo should not
-# exceed 55 pixels and the maximum width should not exceed 200 pixels.
-# Doxygen will copy the logo to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       =
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS         = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
-
-OUTPUT_LANGUAGE        = German
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF       =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful if your file system
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = YES
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 2
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                = "id=\par File-ID\n" \
-                         "copy=\par Copyright\n" \
-                         "license=\par License\n" \
-                         "classmutex=\par Reentrant:\nAccess is locked with class static mutex @c " \
-                         "instancemutex=\par Reentrant:\nAccess is locked with per instance mutex @c " \
-                         "mutex=\par Reentrant:\nAccess is locked with mutex @c "
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = NO
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also makes the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = YES
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING            = YES
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
-
-SYMBOL_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespaces are hidden.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS  = YES
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES     = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
-# will list include files with double quotes in the documentation
-# rather than with sharp brackets.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS        = YES
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
-# will sort the (brief and detailed) documentation of class members so that
-# constructors and destructors are listed first. If set to NO (the default)
-# the constructors will appear in the respective orders defined by
-# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
-# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
-# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
-
-SORT_MEMBERS_CTORS_1ST = YES
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES       = YES
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a
-# match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
-# will still accept a match between prototype and implementation in such cases.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or macro consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and macros in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = YES
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = NO
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page.
-# This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option.
-# You can optionally specify a file name after the option, if omitted
-# DoxygenLayout.xml will be used as the name of the layout file.
-
-LAYOUT_FILE            = doxygenlayout.xml
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED   = NO
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR      = YES
-
-# The WARN_NO_PARAMDOC option can be enabled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC       = NO
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE           = doxygen.errors
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT                  = @SRCDIR@/../src
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
-# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
-# *.f90 *.f *.for *.vhd *.vhdl
-
-FILE_PATTERNS          = *.[ch]xx \
-                         *.doc
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE              = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE                =
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       = moc_* \
-                         uic_* \
-                         qrc_*
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS        =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH           = .
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS       =
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.
-# Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.
-# The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty or if
-# non of the patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
-# and it is also possible to disable source filtering for a specific pattern
-# using *.ext= (so without naming a filter). This option only has effect when
-# FILTER_SOURCE_FILES is enabled.
-
-FILTER_SOURCE_PATTERNS =
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER         = YES
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = YES
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.
-# Otherwise they will link to the documentation.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET        =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the stylesheet and background images
-# according to this color. Hue is specified as an angle on a colorwheel,
-# see http://en.wikipedia.org/wiki/Hue for more information.
-# For instance the value 0 represents red, 60 is yellow, 120 is green,
-# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
-# The allowed range is 0 to 359.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
-# the colors in the HTML output. For a value of 0 the output will use
-# grayscales only. A value of 255 will produce the most vivid colors.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
-# the luminance component of the colors in the HTML output. Values below
-# 100 gradually make the output lighter, whereas values above 100 make
-# the output darker. The value divided by 100 is the actual gamma applied,
-# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
-# and 100 does not change the gamma.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting
-# this to NO can help when comparing the output of multiple runs.
-
-HTML_TIMESTAMP         = YES
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-
-GENERATE_DOCSET        = NO
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID       = com.swisssign.dev
-
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-
-DOCSET_PUBLISHER_ID    = com.swisssign.dev
-
-# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
-
-DOCSET_PUBLISHER_NAME  = "Marc Wäckerlin (SwissSign AG)"
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE               =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION           =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING     =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
-# that can be used as input for Qt's qhelpgenerator to generate a
-# Qt Compressed Help (.qch) of the generated HTML documentation.
-
-GENERATE_QHP           = YES
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE               = @PACKAGENAME@.qch
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#namespace
-
-QHP_NAMESPACE          = org.waweckerlin.marc.dev
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#virtual-folders
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
-# add. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#custom-filters
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
-# Qt Help Project / Custom Filters</a>.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's
-# filter section matches.
-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
-# Qt Help Project / Filter Attributes</a>.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
-#  will be generated, which together with the HTML files, form an Eclipse help
-# plugin. To install this plugin and make it available under the help contents
-# menu in Eclipse, the contents of the directory containing the HTML and XML
-# files needs to be copied into the plugins directory of eclipse. The name of
-# the directory within the plugins directory should be the same as
-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
-# the help appears.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have
-# this name.
-
-ECLIPSE_DOC_ID         = com.swisssign.dev
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX          = NO
-
-# This tag can be used to set the number of enum values (range [0,1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-# Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to YES, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
-# Windows users are probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = YES
-
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = YES
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
-# links to external symbols imported via tag files in a separate window.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are
-# not supported properly for IE 6.0, but are supported on all modern browsers.
-# Note that when changing this option you need to delete any form_*.png files
-# in the HTML output before the changes have effect.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
-# (see http://www.mathjax.org) which uses client side Javascript for the
-# rendering instead of using prerendered bitmaps. Use this if you do not
-# have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you also need to install MathJax separately and
-# configure the path to it using the MATHJAX_RELPATH option.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you need to specify the location relative to the
-# HTML output directory using the MATHJAX_RELPATH option. The destination
-# directory should contain the MathJax.js script. For instance, if the mathjax
-# directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing
-# MathJax, but it is strongly recommended to install a local copy of MathJax
-# before deployment.
-
-MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box
-# for the HTML output. The underlying search engine uses javascript
-# and DHTML and should work on any modern browser. Note that when using
-# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
-# (GENERATE_DOCSET) there is already a search function so this one should
-# typically be disabled. For large projects the javascript based search engine
-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a PHP enabled web server instead of at the web client
-# using Javascript. Doxygen will generate the search PHP script and index
-# file to put on the web server. The advantage of the server
-# based approach is that it scales better to large projects and allows
-# full text search. The disadvantages are that it is more difficult to setup
-# and does not have live searching capabilities.
-
-SERVER_BASED_SEARCH    = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX         = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX          = YES
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = YES
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES     = YES
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE      = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF            = YES
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = YES
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA             =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD                =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.
-# This is useful
-# if you want to understand what is going on.
-# On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED             = HAVE_STACKTRACE
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all references to function-like macros
-# that are alone on a line, have an all uppercase name, and do not end with a
-# semicolon, because these will confuse the parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-#
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       = @PACKAGENAME@.doxytag
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS        = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option also works with HAVE_DOT disabled, but it is recommended to
-# install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS         = YES
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = NO
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = @HAVE_DOT@
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
-# allowed to run in parallel. When set to 0 (the default) doxygen will
-# base this on the number of processors available in the system. You can set it
-# explicitly to a value larger than 0 to get control over the balance
-# between CPU load and processing speed.
-
-DOT_NUM_THREADS        = 0
-
-# By default doxygen will write a font called Helvetica to the output
-# directory and reference it in all dot files that doxygen generates.
-# When you want a differently looking font you can specify the font name
-# using DOT_FONTNAME. You need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
-# containing the font.
-
-DOT_FONTNAME           = Helvetica
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
-# can find it using this tag.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK               = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH          = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will generate a graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = YES
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, svg, gif or svg.
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the
-# \mscfile command).
-
-MSCFILE_DIRS           =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES    = 50
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP            = YES

doc/makefile.am

@@ -1,47 +1,9 @@
-## @file
+## @id $Id$
-##
+#
-## $Id: makefile.am 10 2009-06-17 12:15:51Z marwae $
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 09:18:56 +0100
-##
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
 ##       1         2         3         4         5         6         7         8
 ## 45678901234567890123456789012345678901234567890123456789012345678901234567890
 
-ALL_SRC = ${top_srcdir}/src/*.[ch]xx
-# ${top_srcdir}/src/*.doc
 
-DIRS = html
-#latex
-
-all: ${DIRS}
-
-.PHONY: doc clean-local distclean-local dist-hool install-data-hook \
-        uninstall-hook
-
-deps = ${top_srcdir}/COPYING ${top_srcdir}/README		 \
-       ${top_srcdir}/INSTALL ${top_srcdir}/NEWS ${top_srcdir}/ChangeLog
-
-html: ${ALL_SRC} doxyfile ${deps}
-	doxygen doxyfile
-if PEDANTIC
-	test \! -s doxygen.errors
-endif
-#	cd latex && make
-#	mv latex/refman.pdf @PACKAGENAME@-@MAJOR@.@MINOR@.@LEAST@.pdf
-
-CLEANFILES = doxygen.errors @PACKAGENAME@-@MAJOR@.@MINOR@.@LEAST@.pdf
-DISTCLEANFILES = @PACKAGENAME@.doxytag
-MAINTAINERCLEANFILES = makefile.in
-
-distclean-local:
-	- rm -r html latex
-
-dist-hook: html
-#	cp -r html latex ${distdir}/
-
-install-data-hook:
-	test -d $(DESTDIR)${docdir} || mkdir -p $(DESTDIR)${docdir}
-	chmod -R u+w $(DESTDIR)${docdir}
-	cp -r html $(DESTDIR)${docdir}/
-
-uninstall-hook:
-	-chmod -R u+w $(DESTDIR)${docdir}
-	-rm -rf $(DESTDIR)${docdir}/*

examples/makefile.am

@@ -1,18 +1,19 @@
 ## @id $Id$
-
+#
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 09:18:56 +0100
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
 ##       1         2         3         4         5         6         7         8
 ## 45678901234567890123456789012345678901234567890123456789012345678901234567890
 
 AM_CPPFLAGS = -I${top_srcdir}/src
 AM_LDFLAGS = -L${top_builddir}/src/.libs
-LDADD = -lproxyface
+LDADD = -l${PACKAGE_NAME}
 
 noinst_PROGRAMS = getproxylist
+getproxylist_SOURCES = getproxylist.cxx
+
 if HAVE_QT
 noinst_PROGRAMS += simplegui
 simplegui_SOURCES = simplegui.cxx
 endif
-
-getproxylist_SOURCES = getproxylist.cxx
-
-MAINTAINERCLEANFILES = makefile.in

install-32-bit-lin-win.sh

@@ -1,13 +0,0 @@
-./bootstrap.sh && \
-LDFLAGS="-L/opt/local/i586-mingw32msvc/lib" \
-  CPPFLAGS="-I/opt/local/i586-mingw32msvc/include -DQ_OS_WIN32" \
-  ./configure \
-  --prefix=/opt/local/i586-mingw32msvc \
-  --build=x86_64 \
-  --host=i586-mingw32msvc && \
-make && \
-sudo make install && \
-make clean && \
-./configure && \
-make check && \
-sudo make install

install-64-and-32-bit-linux.sh

@@ -1,21 +0,0 @@
-./bootstrap.sh && \
-LDFLAGS="-L/usr/lib32 -m32" CXXFLAGS="-m32" ./configure \
-  --libdir=/usr/local/lib32 \
-  --build=x86_64 \
-  --host=i386 && \
-make && \
-sudo make install && \
-make clean && \
-LDFLAGS="-L/opt/local/i586-mingw32msvc/lib" \
-  CPPFLAGS="-I/opt/local/i586-mingw32msvc/include -DQ_OS_WIN32" \
-  ./configure \
-  --prefix=/opt/local/i586-mingw32msvc \
-  --build=x86_64 \
-  --host=i586-mingw32msvc \
-  --with-moc=/usr/local/Trolltech/Qt-4.8.0/bin/moc && \
-make && \
-sudo make install && \
-make clean && \
-./configure && \
-make check && \
-sudo make install

makefile.am

@@ -1,66 +1,9 @@
-## @file
+## @id $Id$
-##
+#
-## $Id$
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 09:18:56 +0100
-##
+# Feel free to change it or even remove and rebuild it, up to your needs
-## $Date: 2008-08-26 13:09:21 $
+#
-## $Author: marc $
-##
-## @copy © Marc Wäckerlin
-## @license LGPL, see file <a href="license.html">COPYING</a>
-##
 ##       1         2         3         4         5         6         7         8
 ## 45678901234567890123456789012345678901234567890123456789012345678901234567890
 
-SUBDIRS = @SRC_DIR@ @TST_DIR@ @DOC_DIR@ examples
+SUBDIRS = src doc examples
-
-nobase_include_HEADERS =
-
-EXTRA_DIST = bootstrap.sh debian
-
-DISTCLEANFILES = debian/changelog
-
-deb: dist
-	tar xzvf @PACKAGE@-@VERSION@.tar.gz
-	cd @PACKAGE@-@VERSION@ && dpkg-buildpackage
-	rm -rf @PACKAGE@-@VERSION@ 
-
-doc_DATA = AUTHORS NEWS README COPYING INSTALL ChangeLog @PACKAGENAME@.spec
-
-RPMS = /usr/src/packages/RPMS/i586/@PACKAGENAME@-@MAJOR@.@MINOR@.@LEAST@-1.i586.rpm \
-     /usr/src/packages/RPMS/i586/@PACKAGENAME@-devel-@MAJOR@.@MINOR@.@LEAST@-1.i586.rpm \
-     /usr/src/packages/SRPMS/@PACKAGENAME@-@MAJOR@.@MINOR@.@LEAST@-1.src.rpm
-
-.PHONY: release tag rpm webserver \
-        doc clean-local distclean-local dist-hool install-data-hook \
-        uninstall-hook
-
-release: tag webserver
-
-tag: distcheck
-	cvs ci -R .
-	cvs tag -FR REL_@PACKAGENAME@-@MAJOR@-@MINOR@-@LEAST@ .
-
-rpm: dist
-	cp @PACKAGENAME@-@MAJOR@.@MINOR@.@LEAST@.tar.gz \
-	/usr/src/packages/SOURCES/
-	rpmbuild -ba --clean @PACKAGENAME@.spec
-
-deps = ${top_srcdir}/COPYING ${top_srcdir}/README ${top_srcdir}/INSTALL ${top_srcdir}/NEWS ${top_srcdir}/ChangeLog
-
-clean-local:
-	- rm doxygen.err lib@PACKAGENAME@.doxytag
-	- rm @PACKAGENAME@-dev_@MAJOR@.@MINOR@.@LEAST@-*.deb \
-	     @PACKAGENAME@_@MAJOR@.@MINOR@.@LEAST@-*.changes \
-	     @PACKAGENAME@_@MAJOR@.@MINOR@.@LEAST@-1.tar.gz \
-	     @PACKAGENAME@_@MAJOR@.@MINOR@.@LEAST@-1.dsc \
-	     @PACKAGENAME@-@MAJOR@.@MINOR@.@LEAST@.tar.gz \
-	     @PACKAGENAME@_@MAJOR@.@MINOR@.@LEAST@-*.deb
-
-distclean-local:
-	- rm -r ${top_builddir}/@DOC_DIR@/html/* ${top_builddir}/@DOC_DIR@/latex/*
-	- rm makefile makefile.in doxygen.err libmrw.doxytag
-	- find . -name '*~' | xargs rm
-	- rm -r autom4te.cache
-	- rm aclocal.m4 config.guess config.sub configure \
-	     depcomp install-sh ltmain.sh makefile makefile.in \
-	     missing mkinstalldirs

src/makefile.am

@@ -1,58 +1,32 @@
-## @file
+## @id $Id$
-##
+#
-## $Id$
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 09:18:56 +0100
-##
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
 ##       1         2         3         4         5         6         7         8
 ## 45678901234567890123456789012345678901234567890123456789012345678901234567890
 
-if HAVE_QT
-UISOURCES  = proxyface/proxy.ui proxyface/proxyauth.ui
-RESOURCES  = proxyface/resources.cxx
-MOCHEADER  = proxyface/proxy.hxx proxyface/autoproxy.hxx proxyface/proxyauth.hxx
-LANGUAGES  = proxy_de.qm proxy_en.qm proxy_fr.qm proxy_it.qm
-LANG_TS    = proxy_de.ts proxy_en.ts proxy_fr.ts proxy_it.ts
-UIHEADER   = proxyface/ui_proxy.hxx proxyface/ui_proxyauth.hxx
-MOCSOURCES = proxyface/moc_proxy.cxx proxyface/moc_autoproxy.cxx proxyface/moc_proxyauth.cxx
-endif
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = @PACKAGENAME@.pc
-pkgconfig2dir = $(datarootdir)/pkgconfig
-pkgconfig2_DATA = $(pkgconfig_DATA)
-
-pkgdata_DATA = ${LANGUAGES}
-
-EXTRA_DIST = ${UISOURCES} $(pkgconfig_DATA).in  version.cxx.in
-
-BUILT_SOURCES = ${UIHEADER} ${MOCSOURCES} ${LANGUAGES} ${RESOURCES} version.cxx
-
-proxyfacedir = ${includedir}/proxyface
-proxyface_HEADERS = proxyface/unix.hxx proxyface/windoze.hxx \
-                    proxyface/qtproxy.hxx \
-                    ${MOCHEADER} ${UIHEADER}
-
 lib_LTLIBRARIES = libproxyface.la
 
-libproxyface_la_SOURCES = ${MOCSOURCES} ${LANGUAGES} ${RESOURCES} version.cxx
+proxyfacedir = ${includedir}/proxyface
-libproxyface_la_LDFLAGS = -version-info ${LIB_VERSION}
+proxyface_HEADERS = proxyface/autoproxy.hxx proxyface/proxy.hxx	\
+                    proxyface/unix.hxx proxyface/proxyauth.hxx	\
+                    proxyface/qtproxy.hxx proxyface/windoze.hxx	\
+                    ${libproxyface_la_UIFILES}
 
-rebuild-ts: ${LANG_TS}
+if HAVE_QT
-
+libproxyface_la_UIFILES = proxyface/ui_proxy.hxx	\
-%.cxx: %.qrc
+                          proxyface/ui_proxyauth.hxx
-	${RCC} -o $@ $<
+libproxyface_la_MOCFILES = proxyface/moc_proxy.cxx	\
-
+                           proxyface/moc_autoproxy.cxx	\
-moc_%.cxx: %.hxx
+                           proxyface/moc_proxyauth.cxx
-	${MOC} -DMOC ${CPPFLAGS} -o $@ $<
+libproxyface_la_RCCFILES = proxyface/qrc_resources.cxx
-
+BUILT_SOURCES = ${libproxyface_la_UIFILES}	\
-ui_%.hxx: %.ui
+                ${libproxyface_la_MOCFILES}	\
-	${UIC} -o $@ $<
+                ${libproxyface_la_RCCFILES}
-
+# EXTRA_DIST = ${libproxyface_la_UIFILES:proxyface/ui_%.hxx=proxyface/%.ui}	\
-%.ts: ${UISOURCES} ${MOCHEADER} ${proxyface_HEADERS}
+#              ${libproxyface_la_MOCFILES:proxyface/rcc_%.cxx=proxyface/%.hxx}	\
-	${LUPDATE} ${LUPDATE_ARGS} $^ -ts $@
+#              ${libproxyface_la_RCCFILES:proxyface/rcc_%.cxx=proxyface/%.rcc}
-
+endif
-%.qm: %.ts
+libproxyface_la_SOURCES = version.cxx ${libproxyface_la_RCCFILES}	\
-	${LRELEASE} $< -qm $@
+                          ${libproxyface_la_MOCFILES}
-
-CLEANFILES = ${UIHEADER} ${MOCSOURCES}
-DISTCLEANFILES = $(pkgconfig_DATA)
-MAINTAINERCLEANFILES = makefile.in

src/proxyface.pc.in

@@ -1,11 +1,18 @@
-prefix=@PACKAGENAME@
+## @id $Id$
-exec_prefix=${prefix}
+#
-libdir=${exec_prefix}/lib
+# This file has been added by bootstrap.sh on Sun, 15 Mar 2015 09:18:56 +0100
-includedir=${prefix}/include
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
 
-Name: @PACKAGENAME@
+prefix=@prefix@
-Description: C++/Qt/libproxy/WinHTTP GUI/WPAD Proxy Interface
+exec_prefix=@exec_prefix@
+libdir=/lib
+includedir=/include
+
+Name: @PACKAGE_NAME@
+Description: @DESCRIPTION@
 Version: @VERSION@
-Libs: -L${libdir} -lproxyface
+Libs: -L -l@PACKAGE_NAME@ @LDFLAGS@
-Libs.private: 
+Cflags: -I @CPPFLAGS@
-Cflags: -I${includedir} 

src/proxyface/autoproxy.hxx

@@ -8,7 +8,7 @@
 #ifndef PROXYFACE_HXX
 #define PROXYFACE_HXX
 
-#ifdef QT_NETWORK_LIB
+#if HAVE_QT == 1
 #include <QtNetwork/QNetworkProxy>
 #include <QtNetwork/QNetworkAccessManager>
 #include <QtNetwork/QNetworkReply>
@@ -192,15 +192,15 @@ namespace proxy {
 
       @example getproxylist.cxx */
   class Interface
-#ifdef QT_NETWORK_LIB
+#if HAVE_QT == 1
-#ifdef Q_OS_WIN32
+#  ifdef Q_OS_WIN32
     : public QObject
-#else
+#  else
     : public QThread
-#endif
+#  endif
 #endif
   {
-#ifdef QT_NETWORK_LIB
+#if HAVE_QT == 1
       Q_OBJECT
 #endif
           
@@ -208,11 +208,11 @@ namespace proxy {
           
       //! Keep your instance as long as possible, because of caching.
       Interface()
-#ifdef QT_NETWORK_LIB
+#if HAVE_QT == 1
           : _timeout1Paused(false), _timeout2Paused(false)
 #endif
       {
-#ifdef QT_NETWORK_LIB
+#if HAVE_QT == 1
         PROXYFACE_LOG;
         if (!connect(&_timeout1, SIGNAL(timeout()), SLOT(timeout())))
           qFatal("connect failed");
@@ -229,7 +229,7 @@ namespace proxy {
       
       //! Get list of proxies for a given URL.
       virtual List proxies(const std::string& url) = 0;
-#ifdef QT_NETWORK_LIB
+#if HAVE_QT == 1
       //! Reset, stop all outstanding checks
       void reset() {
         _timeout1.stop();
@@ -575,7 +575,7 @@ namespace proxy {
 }
 #    endif
 #  else
-#    if defined(QT_NETWORK_LIB) && defined(Q_OS_MAC)
+#    if HAVE_QT == 1
 //     use Qt if available (not yet linux)
 #      include <proxyface/qtproxy.hxx>
 namespace proxy {

src/proxyface/unix.hxx

@@ -8,6 +8,7 @@
 #ifndef PROXY_LINUX
 #define PROXY_LINUX
 
+#ifdef HAVE_PROXY
 extern "C" {
   #include <proxy.h>
 }
@@ -60,3 +61,4 @@ namespace proxy {
 }
 
 #endif
+#endif

src/version.cxx

@@ -10,8 +10,8 @@
 
 namespace proxy {
   std::string version() {
-    return "@PACKAGENAME@-@VERSION@";
+    return PACKAGE_NAME "-" PACKAGE_VERSION;
   }
-  const std::string WHAT("#(@) @PACKAGENAME@-@VERSION@");
+  const std::string WHAT("#(@) " PACKAGE_NAME "-" PACKAGE_VERSION);
-  const std::string IDENT("$Id: @PACKAGENAME@-@VERSION@ $");
+  const std::string IDENT("$Id: " PACKAGE_NAME "-" PACKAGE_VERSION " $");
 }