bootstrapped qt project

AUTHORS

@@ -0,0 +1 @@
+Marc Wäckerlin (http://marc.waeckerlin.org) <marc@waeckerlin.org>

NEWS

@@ -0,0 +1 @@
+Don Okt  8 10:51:36 CEST 2015 created certman

README

@@ -0,0 +1,7 @@
+Certificate Manager
+
+Tool to read an write certificates, i.e. SSL certificates and
+SuisseIDs. Supports PEM, DER and PKCS#11 cryptoki token reader. This
+tool should assist in investigating certificate problems.
+
+Based on QT and libpcscxx.

ax_check_qt.m4

@@ -0,0 +1,236 @@
+# SYNOPSIS
+#
+#   Check if a module exists:
+#     AX_CHECK_QT([qt_prefix], [list-of-qt-modules], [optional-modules] [flags])
+#
+#   Abort if a module does not exist:
+#     AX_REQUIRE_QT([qt_prefix], [list-of-qt-modules], [optional-modules] [flags])
+#
+# DESCRIPTIONS
+#
+#    qt_prefix
+#
+#      Each call to AX_CHECK_QT should have a different prefix
+#      value (with a few exceptions discussed later on). This value,
+#      usually provided in uppercase, is used as prefix to the
+#      variables holding the compiler flags and libraries reported by
+#      pkg-config.
+#
+#      For instance, if your prefix was to be FOO you'll be provided
+#      two variables FOO_CFLAGS and FOO_LIBS.
+#
+#      This will also be used as message during the configure checks:
+#      checking for FOO....
+#
+#    list-of-modules
+#
+#      A single call to the macro can check for the presence of one or
+#      more qt modules; you'll see later how to make good use of this
+#      feature. Each entry in the list can have a version comparison
+#      specifier, with the same syntax as the Requires keyword in the
+#      data files themselves.
+#
+#    optional-modules
+#
+#      Optional list of more, optional modules, e.g. modules that
+#      exist only in Qt5, but not in Qt4, such as QtWidgets or
+#      QtWebKitWidgets
+#
+#    flags
+#
+#      Optional flages, space separated from this list:
+#
+#          manualflags
+#
+#            CXXFLAGS, CPPFLAGS and LIBS variables are not
+#            automatically expanded, but you need to add the
+#            qt_prefix_CXXFLAGS, qt_prefix_CPPFLAGS and qt_prefix_LIBS
+#            variables manually where you need them. This is useful,
+#            if some build targets need a feature and some don't.
+
+
+AC_DEFUN([AX_CXX_QT_TOOL], [
+  PKG_PROG_PKG_CONFIG
+  if test -z "$HAVE_$1"; then
+    HAVE_$1=1
+    AC_MSG_CHECKING([for $2])
+    AC_ARG_VAR([$1], [path to Qt tool $2])
+    $1=${$1:-$(${PKG_CONFIG} --variable=$2_location Qt5Core)}
+    $1=${$1:-$(${PKG_CONFIG} --variable=host_bins Qt5Core)/$2-qt5}
+    $1=${$1:-$(${PKG_CONFIG} --variable=host_bins Qt5Core)/$2}
+    $1=${$1:-$(${PKG_CONFIG} --variable=$2_location QtCore)}
+    $1=${$1:-$(${PKG_CONFIG} --variable=host_bins QtCore)/$2}
+    $1=${$1:-$(${PKG_CONFIG} --variable=host_bins QtCore)/$2-qt4}
+    if ! which "${$1%% *}" > /dev/null; then
+      if which "$2-qt5" > /dev/null; then
+        $1=$2-qt5
+      elif which "$2" > /dev/null; then
+        $1=$2
+      elif which "$2-qt4" > /dev/null; then
+        $1=$2-qt4
+      else
+        HAVE_$1=0
+        $1=""
+      fi
+    fi
+    AC_SUBST($1)
+    AM_CONDITIONAL(HAVE_$1, test $HAVE_[$1] -eq 1)
+    if test $HAVE_$1 -eq 1; then
+      AC_MSG_RESULT([$$1])
+    else
+      AC_MSG_RESULT([not found])
+    fi
+  fi
+])
+
+AC_DEFUN([AX_CXX_QT_TOOLS], [
+  AX_CXX_QT_TOOL(QMAKE, qmake)
+  AX_CXX_QT_TOOL(MOC, moc)
+  AX_CXX_QT_TOOL(UIC, uic)
+  AX_CXX_QT_TOOL(RCC, rcc)
+  AX_CXX_QT_TOOL(LUPDATE, lupdate)
+  AX_CXX_QT_TOOL(LRELEASE, lrelease)
+])
+
+AC_DEFUN([AX_CHECK_QT], [
+  qt_modules="$2"
+  qt_modules_optional="$3"
+  qt_flags="$4"
+  AX_CXX_QT_TOOLS
+  HAVE_$1=0
+  PKG_PROG_PKG_CONFIG
+  PKG_CHECK_MODULES([$1]5, [${qt_modules//Qt/Qt5}], [
+    HAVE_$1=1
+    AC_DEFINE([HAVE_$1])
+    QTDIR=$(${PKG_CONFIG} --variable=prefix Qt5Core)
+    QT_PLUGIN_PATH=${QTDIR}/share/qt5/plugins
+    MOC_FLAGS+=" -DHAVE_$1=1 ${[$1]5_CFLAGS}"
+    [$1]_CPPFLAGS="${[$1]5_CFLAGS}"
+    [$1]_CXXFLAGS="${[$1]5_CFLAGS}"
+    [$1]_LIBS="${[$1]5_LIBS}"
+    AC_SUBST([$1]_CPPFLAGS)
+    AC_SUBST([$1]_CXXFLAGS)
+    if test "${qt_flags/manualflags/}" = "${qt_flags}"; then
+      CPPFLAGS+=" ${[$1]_CPPFLAGS}"
+      CXXFLAGS+=" ${[$1]_CXXFLAGS}"
+      LIBS+=" ${[$1]_LIBS}"
+      AC_MSG_NOTICE([Adding flags for $1])
+    else
+      AC_MSG_NOTICE([To enable $1, add $1_CPPFLAGS, $1_CXXFLAGS and $1_LIBS])
+    fi
+    PKG_REQUIREMENTS+=" ${qt_modules//Qt/Qt5}"
+    if test -n "${qt_modules_optional}"; then
+      PKG_CHECK_MODULES([$1]5_OPTIONAL, [${qt_modules_optional//Qt/Qt5}], [
+        MOC_FLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+        [$1]_CPPFLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+        [$1]_CXXFLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+        [$1]_LIBS+=" ${[$1]5_OPTIONAL_LIBS}"
+        AC_SUBST([$1]_CPPFLAGS)
+        AC_SUBST([$1]_CXXFLAGS)
+        if test "${qt_flags/manualflags/}" = "${qt_flags}"; then
+          CPPFLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+          CXXFLAGS+=" ${[$1]5_OPTIONAL_CFLAGS}"
+          LIBS+=" ${[$1]5_OPTIONAL_LIBS}"
+          AC_MSG_NOTICE([Adding flags for $1])
+        else
+          AC_MSG_NOTICE([To enable $1, add $1_CPPFLAGS, $1_CXXFLAGS and $1_LIBS])
+        fi
+        PKG_REQUIREMENTS+=" ${qt_modules_optional//Qt/Qt5}"
+      ], [
+        AC_MSG_NOTICE([Not found: ${qt_modules_optional//Qt/Qt5}])
+      ])
+    fi
+  ], [
+    PKG_CHECK_MODULES([$1], [${qt_modules}], [
+      HAVE_$1=1
+      AC_DEFINE([HAVE_$1])
+      QTDIR=$(${PKG_CONFIG} --variable=prefix QtCore)
+      QT_PLUGIN_PATH=${QTDIR}/share/qt/plugins
+      MOC_FLAGS+=" -DHAVE_$1=1 ${$1_CFLAGS}"
+      [$1]_CPPFLAGS="${[$1]_CFLAGS}"
+      [$1]_CXXFLAGS="${[$1]_CFLAGS}"
+      AC_SUBST([$1]_CPPFLAGS)
+      AC_SUBST([$1]_CXXFLAGS)
+      if test "${qt_flags/manualflags/}" = "${qt_flags}"; then
+        CPPFLAGS+=" ${[$1]_CPPFLAGS}"
+        CXXFLAGS+=" ${[$1]_CXXFLAGS}"
+        LIBS+=" ${[$1]_LIBS}"
+          AC_MSG_NOTICE([Adding flags for $1])
+        else
+          AC_MSG_NOTICE([To enable $1, add $1_CPPFLAGS, $1_CXXFLAGS and $1_LIBS])
+      fi
+      PKG_REQUIREMENTS+=" ${qt_modules}"
+      if test -n "$3"; then
+        PKG_CHECK_MODULES($1_OPTIONAL, [${qt_modules_optional}], [
+          MOC_FLAGS+="${$1_OPTIONAL_CFLAGS}"
+          [$1]_CPPFLAGS+=" ${$1_OPTIONAL_CFLAGS}"
+          [$1]_CXXFLAGS+=" ${$1_OPTIONAL_CFLAGS}"
+          [$1]_LIBS+=" ${$1_OPTIONAL_LIBS}"
+          AC_SUBST([$1]_CPPFLAGS)
+          AC_SUBST([$1]_CXXFLAGS)
+          if test "${qt_flags/manualflags/}" = "${qt_flags}"; then
+            CPPFLAGS+=" ${$1_OPTIONAL_CFLAGS}"
+            CXXFLAGS+=" ${$1_OPTIONAL_CFLAGS}"
+            LIBS+=" ${$1_OPTIONAL_LIBS}"
+            AC_MSG_NOTICE([Adding flags for $1])
+          else
+            AC_MSG_NOTICE([To enable $1, add $1_CPPFLAGS, $1_CXXFLAGS and $1_LIBS])
+          fi
+          PKG_REQUIREMENTS+=" ${qt_modules_optional}"
+        ], [
+          AC_MSG_NOTICE([Not found: ${qt_modules_optional}])
+        ])
+      fi
+    ], [HAVE_$1=0])
+  ])
+  AM_CONDITIONAL(HAVE_$1, test $HAVE_[$1] -eq 1)
+  AX_CHECK_VALID_CXX_FLAG([-fPIC -fPIE], [position independent code flag])
+  if test -n "${MINGW}"; then
+    AX_CHECK_VALID_CXX_FLAG([-Wl,-subsystem,windows], [windows console flag])
+  fi
+  AC_SUBST(QTDIR)
+  AC_SUBST(QT_PLUGIN_PATH)
+  AC_SUBST(CPPFLAGS)
+  AC_SUBST(MOC_FLAGS)
+  AC_SUBST(CXXFLAGS)
+  AC_SUBST(PKG_REQUIREMENTS)
+  AX_ADDITIONAL_QT_RULES_HACK='
+
+LANGUAGE_FILE_BASE ?= translations
+
+ui_%.hxx: %.ui
+	$(UIC) -o [$][@] $<
+
+moc_%.cxx: %.hxx
+	$(MOC) $(MOC_FLAGS) -o [$][@] $<
+
+qrc_%.cxx: %.qrc
+	$(RCC) -o [$][@] -name ${<:%.qrc=%} $<
+  AC_SUBST(AX_ADDITIONAL_QT_RULES_HACK)
+
+#%.qrc: %
+#	cwd=$$(pwd) && cd $< && $(RCC) -project -o $${cwd}/[$][@]
+
+%.qm: %.ts
+	${LRELEASE} $< -qm [$][@]
+
+%.ts: ${LANGUAGE_FILES:%=%}
+	${LUPDATE} -no-obsolete \
+	           -target-language ${@:${LANGUAGE_FILE_BASE}_%.ts=%} \
+	           -ts [$][@] $<
+
+'])
+
+AC_DEFUN([AX_REQUIRE_QT], [
+  AX_CHECK_QT([$1], [$2], [$3], [$4])
+  if ! test "$HAVE_$1" -eq 1; then
+     AC_MSG_ERROR([Required Qt modules not found: $2])
+  fi
+])
+
+
+#   Omit Qt Keywords
+#     AX_QT_NO_KEYWORDS
+AC_DEFUN([AX_QT_NO_KEYWORDS], [
+  CPPFLAGS+=" -DQT_NO_KEYWORDS"
+])

ax_cxx_compile_stdcxx_11.m4

@@ -0,0 +1,133 @@
+# ============================================================================
+#  http://www.gnu.org/software/autoconf-archive/ax_cxx_compile_stdcxx_11.html
+# ============================================================================
+#
+# SYNOPSIS
+#
+#   AX_CXX_COMPILE_STDCXX_11([ext|noext],[mandatory|optional])
+#
+# DESCRIPTION
+#
+#   Check for baseline language coverage in the compiler for the C++11
+#   standard; if necessary, add switches to CXXFLAGS to enable support.
+#
+#   The first argument, if specified, indicates whether you insist on an
+#   extended mode (e.g. -std=gnu++11) or a strict conformance mode (e.g.
+#   -std=c++11).  If neither is specified, you get whatever works, with
+#   preference for an extended mode.
+#
+#   The second argument, if specified 'mandatory' or if left unspecified,
+#   indicates that baseline C++11 support is required and that the macro
+#   should error out if no mode with that support is found.  If specified
+#   'optional', then configuration proceeds regardless, after defining
+#   HAVE_CXX11 if and only if a supporting mode is found.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Benjamin Kosnik <bkoz@redhat.com>
+#   Copyright (c) 2012 Zack Weinberg <zackw@panix.com>
+#   Copyright (c) 2013 Roy Stogner <roystgnr@ices.utexas.edu>
+#
+#   Copying and distribution of this file, with or without modification, are
+#   permitted in any medium without royalty provided the copyright notice
+#   and this notice are preserved. This file is offered as-is, without any
+#   warranty.
+
+#serial 3
+
+m4_define([_AX_CXX_COMPILE_STDCXX_11_testbody], [
+  template <typename T>
+    struct check
+    {
+      static_assert(sizeof(int) <= sizeof(T), "not big enough");
+    };
+
+    typedef check<check<bool>> right_angle_brackets;
+
+    int a;
+    decltype(a) b;
+
+    typedef check<int> check_type;
+    check_type c;
+    check_type&& cr = static_cast<check_type&&>(c);
+
+    auto d = a;
+])
+
+AC_DEFUN([AX_CXX_COMPILE_STDCXX_11], [dnl
+  m4_if([$1], [], [],
+        [$1], [ext], [],
+        [$1], [noext], [],
+        [m4_fatal([invalid argument `$1' to AX_CXX_COMPILE_STDCXX_11])])dnl
+  m4_if([$2], [], [ax_cxx_compile_cxx11_required=true],
+        [$2], [mandatory], [ax_cxx_compile_cxx11_required=true],
+        [$2], [optional], [ax_cxx_compile_cxx11_required=false],
+        [m4_fatal([invalid second argument `$2' to AX_CXX_COMPILE_STDCXX_11])])dnl
+  AC_LANG_PUSH([C++])dnl
+  ac_success=no
+  AC_CACHE_CHECK(whether $CXX supports C++11 features by default,
+  ax_cv_cxx_compile_cxx11,
+  [AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_11_testbody])],
+    [ax_cv_cxx_compile_cxx11=yes],
+    [ax_cv_cxx_compile_cxx11=no])])
+  if test x$ax_cv_cxx_compile_cxx11 = xyes; then
+    ac_success=yes
+  fi
+
+  m4_if([$1], [noext], [], [dnl
+  if test x$ac_success = xno; then
+    for switch in -std=gnu++11 -std=gnu++0x; do
+      cachevar=AS_TR_SH([ax_cv_cxx_compile_cxx11_$switch])
+      AC_CACHE_CHECK(whether $CXX supports C++11 features with $switch,
+                     $cachevar,
+        [ac_save_CXXFLAGS="$CXXFLAGS"
+         CXXFLAGS="$CXXFLAGS $switch"
+         AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_11_testbody])],
+          [eval $cachevar=yes],
+          [eval $cachevar=no])
+         CXXFLAGS="$ac_save_CXXFLAGS"])
+      if eval test x\$$cachevar = xyes; then
+        CXXFLAGS="$CXXFLAGS $switch"
+        ac_success=yes
+        break
+      fi
+    done
+  fi])
+
+  m4_if([$1], [ext], [], [dnl
+  if test x$ac_success = xno; then
+    for switch in -std=c++11 -std=c++0x; do
+      cachevar=AS_TR_SH([ax_cv_cxx_compile_cxx11_$switch])
+      AC_CACHE_CHECK(whether $CXX supports C++11 features with $switch,
+                     $cachevar,
+        [ac_save_CXXFLAGS="$CXXFLAGS"
+         CXXFLAGS="$CXXFLAGS $switch"
+         AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_11_testbody])],
+          [eval $cachevar=yes],
+          [eval $cachevar=no])
+         CXXFLAGS="$ac_save_CXXFLAGS"])
+      if eval test x\$$cachevar = xyes; then
+        CXXFLAGS="$CXXFLAGS $switch"
+        ac_success=yes
+        break
+      fi
+    done
+  fi])
+  AC_LANG_POP([C++])
+  if test x$ax_cxx_compile_cxx11_required = xtrue; then
+    if test x$ac_success = xno; then
+      AC_MSG_ERROR([*** A compiler with support for C++11 language features is required.])
+    fi
+  else
+    if test x$ac_success = xno; then
+      HAVE_CXX11=0
+      AC_MSG_NOTICE([No compiler with C++11 support was found])
+    else
+      HAVE_CXX11=1
+      AC_DEFINE(HAVE_CXX11,1,
+                [define if the compiler supports basic C++11 syntax])
+    fi
+
+    AC_SUBST(HAVE_CXX11)
+  fi
+])

ax_init_standard_project.m4

@@ -0,0 +1,695 @@
+## @id $Id$
+
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+# m4_esyscmd_s does not exist on centos 5 and 6
+m4_define([mrw_esyscmd_s], [m4_normalize(m4_esyscmd([$1]))])
+
+# define least version number from subversion's revision number:
+# it is taken modulo 256 due to a bug on Apple's MacOSX
+m4_define(x_least, m4_ifdef([x_least_diff], mrw_esyscmd_s([
+  SVN_REVISION="ERROR-UNDEFINED-REVISION-to-be-built-in-subdirectory-of-svn-checkout"
+  for path in . .. ../..; do
+    if svn info $path 2>&1 > /dev/null; then
+      SVN_REVISION=$(LANG= svn info $path | sed -n 's/Last Changed Rev: //p')
+      break;
+    fi
+  done
+  echo $ECHO_N $(($SVN_REVISION))
+]),  mrw_esyscmd_s([
+  SVN_REVISION="ERROR-UNDEFINED-REVISION-to-be-built-in-subdirectory-of-svn-checkout"
+  for path in . .. ../..; do
+    if svn info $path 2>&1 > /dev/null; then
+      SVN_REVISION=$(LANG= svn info $path | sed -n 's/Last Changed Rev: //p')
+      break;
+    fi
+  done
+  # Mac does not support LEAST > 255
+  echo $ECHO_N $(($SVN_REVISION%256))
+])))
+# define version number from subversion's revision number:
+# it is taken modulo 256 due to a bug on Apple's MacOSX
+# add to x_minor if revision number is > 256
+m4_define(x_minor_diff, mrw_esyscmd_s([
+  SVN_REVISION="ERROR-UNDEFINED-REVISION-to-be-built-in-subdirectory-of-svn-checkout"
+  for path in . .. ../..; do
+    if svn info $path 2>&1 > /dev/null; then
+      SVN_REVISION=$(LANG= svn info $path | sed -n 's/Last Changed Rev: //p')
+      break;
+    fi;
+  done
+  # Mac does not support LEAST > 255
+  echo $ECHO_N $(($SVN_REVISION/256))
+]))
+# setup version number
+m4_define(x_version, [x_major.m4_ifdef([x_least_diff], x_minor, m4_eval(x_minor+x_minor_diff)).m4_eval(m4_ifdef([x_least_diff], [x_least-x_least_diff], [x_least]))])
+
+## bugreport mail address is taken from <user@host> in first line of AUTHORS
+m4_define(x_bugreport, mrw_esyscmd_s([
+  head -1 AUTHORS | \
+    sed -n 's,.*<\([-_.a-z0-9A-Z]*@[-_.a-z0-9A-Z]*\)>.*,\1,gp'
+]))
+
+m4_include(ax_check_qt.m4)
+
+AC_ALIAS([AC_DEFINE_DIR], [AX_DEFINE_DIR])
+AC_DEFUN([AX_DEFINE_DIR], [
+  prefix_NONE=
+  exec_prefix_NONE=
+  test "x$prefix" = xNONE && prefix_NONE=yes && prefix=$ac_default_prefix
+  test "x$exec_prefix" = xNONE && exec_prefix_NONE=yes && exec_prefix=$prefix
+dnl In Autoconf 2.60, ${datadir} refers to ${datarootdir}, which in turn
+dnl refers to ${prefix}.  Thus we have to use `eval' twice.
+  eval ax_define_dir="\"[$]$2\""
+  eval ax_define_dir="\"$ax_define_dir\""
+  AC_SUBST($1, "$ax_define_dir")
+  AC_DEFINE_UNQUOTED($1, "$ax_define_dir", [$3])
+  test "$prefix_NONE" && prefix=NONE
+  test "$exec_prefix_NONE" && exec_prefix=NONE
+])
+
+# add target dependencies to an existing makefile.in
+#  - parameters:
+#     $1 = existing target
+#     $2 = new dependency for that target
+#     $3 = filename of makefile.in
+AC_DEFUN([AX_ADD_MAKEFILE_TARGET_DEP], [
+  sh_add_makefile_target_dep() {
+    sed -i -e ':a;/^'${1}':.*\\$/{N;s/\\\n//;ta};s/^'${1}':.*$/& '${2}'/' "${srcdir}/${3}"
+    if ! egrep -q "${1}:.* ${2}" "${srcdir}/${3}"; then
+        echo "${1}: ${2}" >> "${srcdir}/${3}"
+    fi
+  }
+  sh_add_makefile_target_dep "$1" "$2" "$3"
+  if test "$1" != ".PHONY"; then
+      sh_add_makefile_target_dep ".PHONY" "$2" "$3"
+  fi
+])
+
+# Same as AC_SUBST, but adds -Dname="value" option to CPPFLAGS
+#  - parameters:
+#     $1 = variable name
+AC_DEFUN([AX_SUBST], [
+  AC_SUBST([$1])
+  tmp_var=$(echo "${$1}" | awk 1 ORS='\\n' | sed 's,\\n$,,')
+  tmp_var=${tmp_var//\"/\\\"}
+  tmp_var=${tmp_var//\'/\'\"\'\"\'}
+  tmp_var=${tmp_var//#/\\#}
+  AM_CPPFLAGS+=" '-D$1=\"${tmp_var}\"'"
+  AC_SUBST(AM_CPPFLAGS)
+])
+
+# must be called on the right position in configure.ac
+#
+# configure.ac must start with:
+#
+# m4_define(x_package_name, YOUR_PACKAGE_NAME) # project's name
+# m4_define(x_major, MAJOR_NUMBER) # project's major version
+# m4_define(x_minor, MINOR_NUMBER) # project's minor version
+# m4_include(ax_init_standard_project.m4)
+# AC_INIT(x_package_name, x_version, x_bugreport, x_package_name)
+# AM_INIT_AUTOMAKE([1.9 tar-pax])
+# AX_INIT_STANDARD_PROJECT
+#
+# you change nothing but: YOUR_PACKAGE_NAME, MAJOR_NUMBER, MINOR_NUMBER
+#
+# configures the basic environment
+AC_DEFUN([AX_INIT_STANDARD_PROJECT], [
+  AC_MSG_CHECKING([target platfrom])
+  UNIX=1
+  MINGW=
+  MACOSX=
+  for h in ${target} ${target_os} ${host} ${host_os} \
+           ${build} ${build_os} $(uname -s 2> /dev/null); do
+    p="$h is generic Unix"
+    case "$h" in
+      (*mingw*)
+        UNIX=; MINGW=1; p="MinGW"; break;;
+      (*Darwin*|*darwin*|*rhapsody*|*macosx*)
+        UNIX=; MACOSX=1; p="MacOSX"; break;;
+    esac
+  done
+  AC_MSG_RESULT($p)
+  AM_CONDITIONAL(UNIX, test "$UNIX" = "1")
+  AM_CONDITIONAL(MINGW, test "$MINGW" = "1")
+  AM_CONDITIONAL(MACOSX, test "$MACOSX" = "1")
+  AX_SUBST(UNIX)
+  AX_SUBST(MINGW)
+  AX_SUBST(MACOSX)
+  AM_CPPFLAGS+=" '-DMAKE_STRING(X)=\#X' '-DNAMESPACE=${PACKAGE_TARNAME//[^a-zA-Z0-9]/_}'"
+  AX_SUBST(NUMBERS)
+  AX_SUBST(HOME)
+  README=$(tail -n +3 README)
+  AX_SUBST(README)
+  _AM_SUBST_NOTMAKE([README])
+  DESCRIPTION=$(head -1 README)
+  AX_SUBST(DESCRIPTION)
+  _AM_SUBST_NOTMAKE([DESCRIPTION])
+  AUTHOR=$(head -1 AUTHORS)
+  AX_SUBST(AUTHOR)
+  _AM_SUBST_NOTMAKE([AUTHOR])
+  DISTRO=$(lsb_release -sc 2>/dev/null || uname -s 2>/dev/null)
+  AX_SUBST(DISTRO)
+  DISTRIBUTOR=$(lsb_release -si 2>/dev/null || uname -s 2>/dev/null)
+  case "${DISTRIBUTOR// /-}" in
+    (Ubuntu) UBUNTU=1; AX_SUBST(UBUNTU);;
+    (Debian) DEBIAN=1; AX_SUBST(DEBIAN);;
+    (SUSE-LINUX) SUSE=1; AX_SUBST(SUSE);;
+    (Fedora) FEDORA=1; AX_SUBST(FEDORA);;
+    (Centos) CENTOS=1; AX_SUBST(CENTOS);;
+  esac
+  AX_SUBST(DISTRIBUTOR)
+  BUILD_NUMBER=${BUILD_NUMBER:-1}
+  AX_SUBST(BUILD_NUMBER)
+  BUILD_DATE=$(LANG= date +"%a, %d %b %Y %H:%M:%S %z")
+  AX_SUBST(BUILD_DATE)
+  if test -f "${PROJECT_NAME}-logo.png"; then
+     PROJECT_LOGO="${PROJECT_NAME}-logo.png"
+  fi
+  AX_SUBST(PROJECT_LOGO)
+  if test -f "${PROJECT_NAME}-icon.png"; then
+     PROJECT_ICON="${PROJECT_NAME}-icon.png"
+  fi
+  AX_SUBST(PROJECT_ICON)
+
+  AC_ARG_ENABLE(pedantic,
+    [AS_HELP_STRING([--enable-pedantic],
+                    [enable all warnings and checks, abort on warnings])],
+    [have_pedantic="$enableval"; test "$enableval" = "yes" &&  \
+       AM_CXXFLAGS="${AM_CXXFLAGS:-} -pedantic-errors -Wall -W -Wfloat-equal -Wundef -Wendif-labels -Wpointer-arith -Wcast-align -Wwrite-strings -Wconversion -Wsign-compare -Wmissing-format-attribute -Wno-multichar -Wpacked -Wredundant-decls -Werror -Wshadow -Wcast-qual -Wno-ctor-dtor-privacy"])
+  dnl problem in libs: -Wshadow -Wcast-qual
+  dnl auto.hpp: -Wno-ctor-dtor-privacy (removed)
+  AM_CONDITIONAL(PEDANTIC, test "$enableval" = "yes")
+  if test "$have_pedantic" == "yes"; then
+    AC_MSG_NOTICE([Pedantic compile mode enabled!
+     - all warnings for GNU g++ are enabled
+     - all warnings result in an error
+     - doxygen warnings are treated as error too]); fi
+
+  AC_ARG_ENABLE(debug,
+    [AS_HELP_STRING([--enable-debug],
+                    [compile for debugger])],
+    [have_debug="$enableval"], [have_debug="no"])
+  AM_CONDITIONAL(DEBUG, test "$enableval" = "yes")
+  if test "$have_debug" == "yes"; then
+    AC_MSG_NOTICE([Debug compile mode enabled]);
+    AM_CPPFLAGS="${AM_CPPFLAGS} -DDEBUG"
+    AM_CXXFLAGS="${AM_CXXFLAGS:-} -ggdb3 -O0"
+    AM_LDFLAGS="${AM_LDFLAGS} -ggdb3 -O0"
+  else
+    AM_CPPFLAGS="${AM_CPPFLAGS} -DQT_NO_DEBUG_OUTPUT -DQT_NO_DEBUG"
+  fi
+
+  AC_CONFIG_FILES([makefile])
+  AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-standard-project-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-standard-project-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-standard-project-targets], [makefile.in])
+  test -f makefile.in && cat >> makefile.in <<EOF
+#### Begin: Appended by $0
+EXTRA_DIST += bootstrap.sh
+clean-standard-project-targets:
+	-rm -rf \${PACKAGE_NAME}-\${PACKAGE_VERSION}
+	-rm \${PACKAGE_TARNAME}-\${PACKAGE_VERSION}.tar.gz
+distclean-standard-project-targets:
+	-rm -r autom4te.cache
+	-rm aclocal.m4 config.guess config.sub configure depcomp compile install-sh ltmain.sh makefile missing mkinstalldirs
+maintainer-clean-standard-project-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support C++
+AC_DEFUN([AX_USE_CXX], [
+  m4_include(ax_cxx_compile_stdcxx_11.m4)
+  AC_LANG(C++)
+  AX_CXX_COMPILE_STDCXX_11(noext, optional)
+  AC_PROG_CXX
+  AC_PROG_CPP
+
+  AC_CONFIG_FILES([src/makefile])
+  
+  AM_CPPFLAGS+=' -I ${top_srcdir}/src -I ${top_builddir}/src -I ${srcdir} -I ${builddir}'
+  AM_LDFLAGS+=' -L ${top_srcdir}/src -L ${top_builddir}/src'
+
+  # Get rid of those stupid -g -O2 options!
+  CXXFLAGS="${CXXFLAGS//-g -O2/}"
+  CFLAGS="${CFLAGS//-g -O2/}"
+
+# pass compile flags to make distcheck
+  AM_DISTCHECK_CONFIGURE_FLAGS="CXXFLAGS='${CXXFLAGS}' CPPFLAGS='${CPPFLAGS}' CFLAGS='${CFLAGS}' LDFLAGS='${LDFLAGS}'"
+  AC_SUBST(AM_DISTCHECK_CONFIGURE_FLAGS)
+
+  AC_SUBST(AM_CXXFLAGS)
+  AC_SUBST(AM_CPPFLAGS)
+  AC_SUBST(AM_LDFLAGS)
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-cxx-targets], [src/makefile.in])
+  test -f src/makefile.in && cat >> src/makefile.in <<EOF
+#### Begin: Appended by $0
+%.app: %
+	-rm -r [\$][@]
+	\$(MAKE) DESTDIR=[\$][\$](pwd)/[\$][@]/tmp install
+	QTDIR="\${QTDIR}" \
+	QT_PLUGINS="\${QT_PLUGINS}" \
+	QT_PLUGIN_PATH="\${QT_PLUGIN_PATH}" \
+	  \${top_builddir}/mac-create-app-bundle.sh \
+	    [\$][@] [\$][<] [\$][\$](pwd)/[\$][@]/tmp\${prefix}
+
+maintainer-clean-cxx-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support CppUnit for C++ unit tests
+AC_DEFUN([AX_USE_CPPUNIT], [
+  AM_PATH_CPPUNIT([1.0.0], [have_cppunit="yes"], [have_cppunit="no"])
+  # infos and warnings
+  if test "$have_cppunit" = "no"; then
+    AC_MSG_WARN([Missing cppunit development library!
+     - you cannot check the library using "make check"
+     - everything else works perfectly]); fi
+  AC_CONFIG_FILES([test/makefile])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-test-targets], [test/makefile.in])
+  test -f test/makefile.in && cat >> test/makefile.in <<EOF
+#### Begin: Appended by $0
+maintainer-clean-test-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support C++ examples
+AC_DEFUN([AX_BUILD_EXAMPLES], [
+  AC_CONFIG_FILES([examples/makefile])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-example-targets], [examples/makefile.in])
+  test -f examples/makefile.in && cat >> examples/makefile.in <<EOF
+#### Begin: Appended by $0
+maintainer-clean-example-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support HTML data for webservers
+AC_DEFUN([AX_BUILD_HTML], [
+  AC_CONFIG_FILES([html/makefile])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-html-targets], [html/makefile.in])
+  test -f html/makefile.in && cat >> html/makefile.in <<EOF
+#### Begin: Appended by $0
+maintainer-clean-html-targets:
+	-rm makefile.in
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support C++ libraries
+AC_DEFUN([AX_USE_LIBTOOL], [
+  # libtool versioning
+  LIB_MAJOR=m4_eval(x_major+x_minor+x_minor_diff)
+  LIB_MINOR=x_least
+  LIB_LEAST=m4_eval(x_minor+x_minor_diff)
+  LIB_VERSION="${LIB_MAJOR}:${LIB_MINOR}:${LIB_LEAST}"
+  AM_LDFLAGS="-version-info ${LIB_VERSION}"
+  AC_SUBST(AM_LDFLAGS)
+  AC_SUBST(LIB_VERSION)
+  AC_PROG_LIBTOOL
+  AC_CONFIG_FILES([src/${PACKAGE_NAME}.pc])
+  AX_ADD_MAKEFILE_TARGET_DEP([install-data-am], [install-data-libtool-pkg], [src/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([uninstall-am], [uninstall-data-am], [src/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([uninstall-data-am], [uninstall-data-libtool-pkg], [src/makefile.in])
+  test -f src/makefile.in && cat >> src/makefile.in <<EOF
+#### Begin: Appended by $0
+install-data-libtool-pkg:
+	test -d \$(DESTDIR)\${libdir}/pkgconfig || mkdir -p \$(DESTDIR)\${libdir}/pkgconfig
+	chmod -R u+w \$(DESTDIR)\${libdir}/pkgconfig
+	cp \${PACKAGE_NAME}.pc \$(DESTDIR)\${libdir}/pkgconfig/
+uninstall-data-libtool-pkg:
+	-chmod -R u+w \$(DESTDIR)\${libdir}/pkgconfig
+	-rm -f \$(DESTDIR)\${libdir}/pkgconfig/\${PACKAGE_NAME}.pc
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support debian packages
+AC_DEFUN([AX_USE_DEBIAN_PACKAGING], [
+  README_DEB=$(tail -n +3 README | sed -e 's/^$/./g' -e 's/^/ /g')
+  AC_SUBST(README_DEB)
+  _AM_SUBST_NOTMAKE([README_DEB])
+  AC_CONFIG_FILES([debian/changelog debian/control])
+  AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-debian-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-debian-targets], [makefile.in])
+  test -f makefile.in && cat >> makefile.in <<EOF
+#### Begin: Appended by $0
+EXTRA_DIST += debian
+clean-debian-targets:
+	-rm -rf \${PACKAGE_NAME}_\${PACKAGE_VERSION}~\${DISTRO}.\${BUILD_NUMBER}.{dsc,tar.gz} \${PACKAGE_NAME}_\${PACKAGE_VERSION}~\${DISTRO}.\${BUILD_NUMBER}*.changes \$\$(sed -n 's,Package: \(.*\),\1_${PACKAGE_VERSION}~${DISTRO}.${BUILD_NUMBER}*.deb,p;' debian/control)
+deb: distdir
+	cd \${PACKAGE_NAME}-\${PACKAGE_VERSION} && ( export CFLAGS="\${CFLAGS}"; export CPPFLAGS="\${CPPFLAGS}"; export  CXXFLAGS="\${CXXFLAGS}"; export LDFLAGS="\${LDFLAGS}"; export DEB_CFLAGS_APPEND="\${CFLAGS}"; export DEB_CPPFLAGS_APPEND="\${CPPFLAGS}"; export  DEB_CXXFLAGS_APPEND="\${CXXFLAGS}"; export  DEB_LDFLAGS_APPEND="\${LDFLAGS}"; dpkg-buildpackage )
+distclean-debian-targets:
+	-rm debian/changelog debian/control
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support RPM packages
+AC_DEFUN([AX_USE_RPM_PACKAGING], [
+  AC_CONFIG_FILES([${PACKAGE_NAME}.spec])
+  #AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-rpm-targets], [makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-rpm-targets], [makefile.in])
+  test -f makefile.in && cat >> makefile.in <<EOF
+#### Begin: Appended by $0
+EXTRA_DIST += \${PACKAGE_NAME}.spec.in
+rpm: dist
+	rpmbuild -ba --define "_topdir \$\$(pwd)" --define "_sourcedir \$\$(pwd)" \${PACKAGE_NAME}.spec
+distclean-rpm-targets:
+	-rm \${PACKAGE_NAME}.spec
+#### End: $0
+EOF
+])
+
+# use this in configure.ac to support scripts, e.g. bash scripts
+AC_DEFUN([AX_USE_SCRIPTS], [
+  AC_CONFIG_FILES([scripts/makefile])
+])
+
+# use this in configure.ac to support Doxygen documentation generation
+AC_DEFUN([AX_USE_DOXYGEN], [
+  AC_CHECK_PROG(have_doxygen, doxygen, yes, no)
+  AC_CHECK_PROG(have_dot, dot, yes, no)
+  AC_CHECK_PROG(have_mscgen, mscgen, yes, no)
+  PDF_DOC=${PACKAGE_NAME}-${PACKAGE_VERSION}.pdf
+  AC_SUBST(PDF_DOC)
+  if test "$have_doxygen" = "no"; then
+    AC_MSG_WARN([Missing program doxygen!
+     - you cannot rebuild the documentation
+     - there are precompiled derived files in the distribution]); fi
+  if test "$have_dot" = "no"; then
+    AC_MSG_WARN([Missing program dot!
+     - when you rebild documentation, there are no generated images
+     - there are precompiled derived files in the distribution]); fi
+  if test "$have_mscgen" = "no"; then
+    AC_MSG_WARN([Missing program mscgen!
+     - when you rebild documentation, there are no message state charts
+     - there are precompiled derived files in the distribution]); fi
+  AC_CONFIG_FILES([doc/makefile doc/doxyfile])
+  AX_ADD_MAKEFILE_TARGET_DEP([clean-am], [clean-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([distclean-am], [distclean-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([maintainer-clean-am], [maintainer-clean-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([install-data-am], [install-data-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([uninstall-am], [uninstall-documentation], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([all], [doc], [doc/makefile.in])
+  AX_ADD_MAKEFILE_TARGET_DEP([.PHONY], [pdf], [doc/makefile.in])
+  test -f doc/makefile.in && cat >> doc/makefile.in <<EOF
+#### Begin: Appended by $0
+doc: doxyfile
+	doxygen doxyfile
+@PEDANTIC_TRUE@	test \! -s doxygen.errors
+
+clean-documentation:
+	-rm doxygen.errors @PDF_DOC@
+distclean-documentation:
+	-rm -r html
+	-rm  @PACKAGE_NAME@.doxytag
+maintainer-clean-documentation:
+	-rm makefile.in
+install-data-documentation:
+	test -d \$(DESTDIR)\${docdir} || mkdir -p \$(DESTDIR)\${docdir}
+	chmod -R u+w \$(DESTDIR)\${docdir}
+	cp -r html \$(DESTDIR)\${docdir}/
+uninstall-documentation:
+	-chmod -R u+w \$(DESTDIR)\${docdir}
+	-rm -rf \$(DESTDIR)\${docdir}/html
+#### End: $0
+EOF
+])
+
+# require a specific package, with fallback: test for a header
+#  - parameter:
+#     $1 = unique id (no special characters)
+#     $2 = module name (optional, if different from id)
+#     $3 = a header file to find (optional)
+#     $4 = alternative module names (space separated, optional)
+#     $5 = optional flags:
+#            manualflags if CXXFLAGS, CPPFLAGS, LIBS should remain unchanged
+#
+# uses PKG_CHECK_MODULES to test for a module
+# then, if given, looks for the header file
+# if header file is not found, searches in alternative modules
+# sets all flags, so that the module can be used everywhere
+# fails if not found
+AC_DEFUN([AX_PKG_REQUIRE], [
+  PKG_PROG_PKG_CONFIG
+  optional_flags="$5"
+  $1_found=no
+  secondpar="m4_default([$2], [$1])"
+  PKG_CHECK_MODULES([$1], [m4_default([$2], [$1])], [
+    $1_found=$secondpar
+    PKG_REQUIREMENTS+=" $secondpar"
+  ], [
+    if test -n "$4"; then
+      AC_MSG_WARN([Recommended package $secondpar for feature $1 not installed, trying $4])
+      for pkg in $4; do
+        PKG_CHECK_MODULES([$1], [$pkg], [
+          PKG_REQUIREMENTS+=" $pkg"
+          $1_found=$pkg
+          break;
+        ], [
+          AC_MSG_WARN([Recommended package $pkg for feature $1 not installed])
+        ])
+      done
+    fi
+  ])
+  AC_SUBST(CPPFLAGS)
+  AC_SUBST(CXXFLAGS)
+  AC_SUBST(PKG_REQUIREMENTS)
+  if test -n "$3"; then
+    if test "${$1_found}" = "no"; then
+      tmp_package="yes"
+    else
+      tmp_package=${$1_found}
+    fi
+    $1_found=no
+    old_CPPFLAGS=${CPPFLAGS}
+    CPPFLAGS=" ${$1_CFLAGS} ${CPPFLAGS}"
+    AC_CHECK_HEADER([$3], [
+      $1_found=${tmp_package}
+    ], [
+      for x in ${$1_CFLAGS}; do
+        AC_MSG_NOTICE([search for $3 in ${x[#]-I}])
+        for f in $(find ${x[#]-I} -name "$3" 2> /dev/null); do
+          if test -f "$f"; then
+            $1_found=${tmp_package}
+            $1_CFLAGS+=" -I${f%/*}"
+            AC_MSG_NOTICE([added path ${f%/*}])
+            break;
+          fi
+        done
+        if test "${$1_found}" != "no"; then
+          break;
+        fi
+      done
+      if test "${$1_found}" = "no"; then
+        tmp_includedir=$(${PKG_CONFIG} --variable=includedir $tmp_package)
+        for x in ${tmp_includedir}; do
+          AC_MSG_NOTICE([search for $3 in $x])
+          for f in $(find ${x} -name "$3" 2> /dev/null); do
+            if test -f "$f"; then
+              $1_found=${tmp_package}
+              $1_CFLAGS+=" -I${f%/*}"
+              AC_MSG_NOTICE([added path ${f%/*}])
+              break;
+            fi
+          done
+          if test "${$1_found}" != "no"; then
+            break;
+          fi
+        done
+      fi
+    ])
+    CPPFLAGS=${old_CPPFLAGS}
+  fi
+  if test "${$1_found}" = "no"; then
+    if test -n "$3"; then
+      if test -n "$4"; then
+        AC_MSG_ERROR([Feature $1 not found, need header $3 in modules $secondpar or $4])
+      else
+        AC_MSG_ERROR([Feature $1 not found, need header $3 in module $secondpar])
+      fi
+    else
+      AC_MSG_ERROR([Feature $1 not found please install module $secondpar])
+    fi
+  fi
+  [$1]_CPPFLAGS="${$1_CFLAGS}"
+  [$1]_CXXFLAGS="${$1_CFLAGS}"
+  AC_SUBST([$1]_CPPFLAGS)
+  AC_SUBST([$1]_CXXFLAGS)
+  if test "${optional_flags/manualflags/}" = "${optional_flags}"; then
+    CPPFLAGS+=" ${$1_CPPFLAGS}"
+    CXXFLAGS+=" ${$1_CXXFLAGS}"
+    LIBS+=" ${$1_LIBS}"
+    AC_MSG_NOTICE([Adding flags for $1])
+  else
+    AC_MSG_NOTICE([To enable $1, add $1_CPPFLAGS, $1_CXXFLAGS and $1_LIBS])
+  fi
+])
+
+# check if a specific package exists
+#  - parameter:
+#     $1 = unique id (no special characters)
+#     $2 = module name (optional, if different from id)
+#     $3 = optional flags:
+#          manualflags if CXXFLAGS, CPPFLAGS, LIBS should remain unchanged
+#
+# uses PKG_CHECK_MODULES to test for a module
+# sets automake conditional HAVE_$1 to 0 (not found) or 1 (found)
+# sets all flags, so that the module can be used everywhere
+AC_DEFUN([AX_PKG_CHECK], [
+  optional_flags="$3"
+  PKG_PROG_PKG_CONFIG
+  PKG_CHECK_MODULES([$1], [m4_default([$2], [$1])], [
+    HAVE_$1=1
+    [$1]_CPPFLAGS="${$1_CFLAGS}"
+    [$1]_CXXFLAGS="${$1_CFLAGS}"
+    AC_SUBST([$1]_CPPFLAGS)
+    AC_SUBST([$1]_CXXFLAGS)
+    if test "${optional_flags/manualflags/}" = "${optional_flags}"; then
+      CPPFLAGS+=" ${$1_CPPFLAGS}"
+      CXXFLAGS+=" ${$1_CXXFLAGS}"
+      LIBS+=" ${$1_LIBS}"
+      AC_MSG_NOTICE([Adding flags for $1])
+    else
+      AC_MSG_NOTICE([To enable $1, add $1_CPPFLAGS, $1_CXXFLAGS and $1_LIBS])
+    fi
+    if test -z "$PKG_REQUIREMENTS"; then
+      PKG_REQUIREMENTS="m4_default([$2], [$1])"
+    else
+      PKG_REQUIREMENTS="${PKG_REQUIREMENTS}, m4_default([$2], [$1])"
+    fi
+  ], [
+    HAVE_$1=0
+  ])
+  AM_CONDITIONAL(HAVE_$1, test $HAVE_[$1] -eq 1)
+  AC_SUBST(HAVE_$1)
+  AC_SUBST(CPPFLAGS)
+  AC_SUBST(CXXFLAGS)
+  AC_SUBST(PKG_REQUIREMENTS)
+])
+
+# make sure, a specific header exists
+# - parameter:
+#    $1 = header name
+AC_DEFUN([AX_REQUIRE_HEADER], [
+  AC_CHECK_HEADER($1, [], [
+    if test -n "$2"; then
+      found=0
+      for d in $2; do
+        if test -f "${d}/$1"; then
+          AC_MSG_NOTICE([found file ${d}/$1])
+          CPPFLAGS+=" -I${d}"
+          found=1
+          break;
+        else
+          AC_MSG_NOTICE([not found file ${d}/$1])
+        fi
+      done
+    fi
+    if test $found -eq 0; then
+      AC_MSG_ERROR([Header $1 not found])
+    fi
+    ], [])
+  ], [])
+])
+
+# Check within a list of CPP-Flags for the first that is usable and
+# configure it
+#  - parameter:
+#     $1 = white-space separated list of alternative flags
+#     $2 = module name (optional, if different from id)
+AC_DEFUN([AX_CHECK_VALID_CPP_FLAG], [
+  AC_MSG_CHECKING([m4_default([$2], [for valid flag in "$1"])])
+  save_cppflags="$CPPFLAGS"
+  newflag="no"
+  for test_flag in $1; do
+    CPPFLAGS+=" ${test_flag}"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [
+      newflag="$test_flag"
+      CPPFLAGS="$save_cppflags"
+      CPPFLAGS+=" ${test_flag}"
+      break;
+    ])
+    CPPFLAGS="$save_cppflags"
+  done
+  AC_SUBST(CPPFLAGS)
+  AC_MSG_RESULT([$newflag in $CPPFLAGS])
+])
+
+# Check within a list of CXX-Flags for the first that is usable and
+# configure it
+#  - parameter:
+#     $1 = white-space separated list of alternative flags
+#     $2 = module name (optional, if different from id)
+AC_DEFUN([AX_CHECK_VALID_CXX_FLAG], [
+  AC_MSG_CHECKING([m4_default([$2], [for valid flag in "$1"])])
+  save_cxxflags="$CXXFLAGS"
+  newflag="no"
+  for test_flag in $1; do
+    CXXFLAGS+=" ${test_flag}"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [
+      newflag="$test_flag"
+      CXXFLAGS="$save_cxxflags"
+      CXXFLAGS+=" ${test_flag}"
+      break;
+    ])
+    CXXFLAGS="$save_cxxflags"
+  done
+  AC_SUBST(CXXFLAGS)
+  AC_MSG_RESULT([$newflag in $CXXFLAGS])
+])
+
+# Check within a list of C-Flags for the first that is usable and
+# configure it
+#  - parameter:
+#     $1 = white-space separated list of alternative flags
+#     $2 = module name (optional, if different from id)
+AC_DEFUN([AX_CHECK_VALID_C_FLAG], [
+  AC_MSG_CHECKING([m4_default([$2], [for valid flag in "$1"])])
+  save_cflags="$CFLAGS"
+  newflag="no"
+  for test_flag in $1; do
+    CFLAGS+=" ${test_flag}"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [
+      newflag="$test_flag"
+      CFLAGS="$save_cflags"
+      CFLAGS+=" ${test_flag}"
+      break;
+    ])
+    CFLAGS="$save_cflags"
+  done
+  AC_SUBST(CFLAGS)
+  AC_MSG_RESULT([$newflag in $CFLAGS])
+])
+
+# Check within a list of LD-Flags for the first that is usable and
+# configure it
+#  - parameter:
+#     $1 = white-space separated list of alternative flags
+#     $2 = module name (optional, if different from id)
+AC_DEFUN([AX_CHECK_VALID_LD_FLAG], [
+  AC_MSG_CHECKING([m4_default([$2], [for valid flag in "$1"])])
+  save_ldflags="$LDFLAGS"
+  newflag="no"
+  for test_flag in $1; do
+    LDFLAGS+=" ${test_flag}"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [
+      newflag="$test_flag"
+      LDFLAGS="$save_ldflags"
+      LDFLAGS+=" ${test_flag}"
+      break;
+    ])
+    LDFLAGS="$save_ldflags"
+  done
+  AC_SUBST(LDFLAGS)
+  AC_MSG_RESULT([$newflag in $LDFLAGS])
+])

bootstrap.sh

@@ -0,0 +1,1013 @@
+#! /bin/bash
+## @file
+##
+## $Id$
+##
+## $Date: 2004/08/31 15:57:19 $
+## $Author: marc $
+##
+## @copy © Marc Wäckerlin
+## @license LGPL, see file <a href="license.html">COPYING</a>
+##
+## $Log: bootstrap.sh,v $
+## Revision 1.3  2004/08/31 15:57:19  marc
+## added file header
+##
+
+MY_NAME=${0##*/}
+PROJECT_PATH=$(pwd)
+DEFAULT_PROJECT_NAME=${PROJECT_PATH##*/}
+configure=0
+build=0
+buildtarget="distcheck"
+overwrite=0
+rebuild=0
+rebuildfiles=()
+while test $# -gt 0; do
+    case "$1" in
+        (--configure|-c) configure=1;;
+        (--build|-b) configure=1; build=1;;
+        (--target|-t) shift; configure=1; build=1; buildtarget="$1";;
+        (--overwrite|-o) overwrite=1;;
+        (--rebuild|-r) rebuild=1;;
+        (--rebuild-file|-f) shift; rebuildfiles+=("$1");;
+        (--version|-v)
+            echo "$Id$";
+            exit;;
+        (--help|-h) less <<EOF
+SYNOPSIS
+
+  ${MY_NAME} [--help|-h] [OPTIOS]
+
+OPTIONS
+
+  --configure, -c            call ./configure after initialization
+  --build, -b                build, also call ./configure && make distcheck
+  --target, -t <target>      same as -b, but specify target instead of distcheck
+  --overwrite, -o            overwrite all basic files (bootstrap.sh, m4-macros)
+  --rebuild, -r              force rebuild of generated files, even if modified
+  --rebuild-file, -f <file>  rebild specific file (can be added multiple times)
+  --help, -h                 show this help
+  --version, -v              show version and date of this file
+
+DESCRIPTION
+
+  Initializes your build environment, as far as neccessary. Reads your
+  used features from configure.ac, if that file exists, or creates a
+  configure.ac. Automatically copies or creates all required template
+  files.
+
+  From your new and empty project's subversion path, call $0 to
+  initialize your build environment.
+
+  Before you call ${MY_NAME} the very first time, edit ${0#/*}/AUTHORS
+  and replace it with your name (or the authors of your project, one
+  name each line, main developper and copyright holder on the first
+  line).
+
+  The first call to ${MY_NAME} should be something like
+  ../bootstrap-build-environment/${MY_NAME} and not
+  ./${MY_NAME}. Actually, you called $0.
+
+  In the way you called ${MY_NAME}, it has detected
+  ${DEFAULT_PROJECT_NAME} as the project name for your project in
+  ${PROJECT_PATH}. In the first run, you should call ${MY_NAME} from a
+  checked out the bootstrap-build-environment from
+  https://dev.marc.waeckerlin.org/, and the path from where you call
+  ${MY_NAME} (which is actually ${PROJECT_PATH}) should be the path to
+  your newly created project. Please note that your project must be a
+  checked out subversion repository, since this build environment
+  relies on subversion.
+
+  Example for an initial run, where your new projet is stored in
+  subversion on svn:/path/to/your/new-project:
+
+    cd ~/svn
+    svn co https://dev.marc.waeckerlin.org/svn/bootstrap-build-environment/trunk \\
+           bootstrap-build-environment
+    svn co svn:/path/to/your/new-project/trunk new-project
+    cd new-project
+    ../bootstrap-build-environment/bootstrap.sh
+
+RUNNING
+
+  If you run ${MY_NAME}, it first generates the necessary files (see
+  below), then first runs make distclean if a makefile exists. After
+  this it calles aclocal, libtoolize, automake, autoconf and
+  optionally ./configure.
+
+GENERATED FILES
+
+  This script copies the following files into your project environment:
+    * ${MY_NAME}
+    * ax_init_standard_project.m4 - auxiliary macro definition file
+    * ax_cxx_compile_stdcxx_11.m4 - auxiliary macro definition file
+    * ax_check_qt.m4 - auxiliary macro definition file
+    * resolve-debbuilddeps.sh - script to install debian package dependencies
+    * resolve-rpmbuilddeps.sh - script to install RPM package dependencies
+    * build-resource-file.sh - build resource.qrc file from a resource directory
+    * mac-create-app-bundle.sh - script to create apple mac os-x app-bundle
+    * AUTHORS - replace your name in AUTHORS before first run
+    * NEWS - empty file add your project's news
+    * README - add project description (first line is header, followed by an empty line)
+    * configure.ac - global configuration file template
+    * makefile.am - global makefile template
+    * src/makefile.am - if you enabled AX_USE_CXX
+    * src/version.hxx - if you enabled AX_USE_CXX
+    * src/version.cxx - if you enabled AX_USE_CXX
+    * html/makefile.am - if you enabled AX_BUILD_HTML
+    * scripts/makefile.in - if you enabled AX_USE_SCRIPTS
+    * doc/makefile.am - if you enabled AX_USE_DOXYGEN
+    * doc/doxyfile.in - if you enabled AX_USE_DOXYGEN
+    * test/makefile.am - if you enabled AX_USE_CPPUNIT
+    * examples/makefile.am - if you enabled AX_BUILD_EXAMPLES
+    * debian/changelog.in - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/control.in - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/docs - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/${DEFAULT_PROJECT_NAME}.install - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/${DEFAULT_PROJECT_NAME}.dirs - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/${DEFAULT_PROJECT_NAME}-dev.install - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/${DEFAULT_PROJECT_NAME}-dev.dirs - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/rules - if you enabled AX_USE_DEBIAN_PACKAGING
+    * debian/compat - if you enabled AX_USE_DEBIAN_PACKAGING
+    * ${DEFAULT_PROJECT_NAME}.spec.in - if you enable AX_USE_RPM_PACKAGING
+    * src/${DEFAULT_PROJECT_NAME}.pc.in - if you enabled AX_USE_LIBTOOL
+
+REBUILDING FILES
+
+  To rebuild all these files, just run "${MY_NAME} -r".
+
+  To copy only the files provided by this package, that means those
+  files you must never change, that means to update the build system
+  to the latest release, run "${MY_NAME} -o"
+
+  You can also rebuild a list of singleany list of specific file files
+  by adding option "${MY_NAME} -f <file>" to rebuild file
+  "<file>". You can add option "-f" more than once.
+
+FILES TO EDIT
+
+  After creation of the files, you can edit them according to your
+  needs. Please don't forget to redo your edits after rebuilding a
+  file. Most files don't even need to be edited, they work out of the
+  box.
+
+  The following files normally require editing:
+    * AUTHORS
+    * NEWS
+    * README
+    * configure.ac
+    * src/makefile.am
+    * html/makefile.am
+    * test/makefile.am
+    * examples/makefile.am
+
+FILE DEPENDENCIES
+
+  You should rebuild (see above) the files, whenever you change the
+  configuration a dependent, i.e.:
+
+    * test/makefile.am depends on AX_USE_LIBTOOL
+    * html/makefile.am depends on AX_BUILD_HTML
+    * doc/doxyfile.in depends on AX_BUILD_EXAMPLES
+    * debian/control.in depends on AX_USE_DOXYGEN, AX_USE_CPPUNIT,
+      AX_CXX_QT, AX_CHECK_QT, AX_REQUIRE_QT, AX_USE_LIBTOOL
+    * debian/${DEFAULT_PROJECT_NAME}.install depends on AX_USE_LIBTOOL
+    * debian/${DEFAULT_PROJECT_NAME}.dirs depends on AX_USE_LIBTOOL
+    * debian/${DEFAULT_PROJECT_NAME}-dev.install depends on AX_USE_LIBTOOL
+    * debian/${DEFAULT_PROJECT_NAME}-dev.dirs depends on AX_USE_LIBTOOL
+    * ${DEFAULT_PROJECT_NAME}.spec.in depends on AX_USE_RPM_PACKAGING,
+      AX_USE_LIBTOOL, AX_CHECK_QT, AX_REQUIRE_QT, AX_CXX_QT, AX_USE_CPPUNIT
+
+FILES
+
+  * AUTHORS:      First line is the main author and used in Debian and RPM
+                  packaging, so there must be a GPG key that matches
+                  to this line.
+  * NEWS:         File to add project news.
+  * README:       First line is a short description of your project, then an
+                  empty line must follow. All remaining lines are a
+                  long description of your project. this information
+                  is copied, e.g. in Debian or RPM packages. In C++
+                  <ou can access the readme by calling
+                  ${DEFAULT_PROJECT_NAME}::description().
+  * ChangeLog:    Your changelog is automatically maintained from
+                  subversion history, using svn2cl. You don't need to
+                  care about.
+  * configure.ac: This file becomes very short and simple. You provide
+                  the project name, the major and minor version. The
+                  least version number is automatically taken from
+                  subversion's revision, so every checkin
+                  automatically increments the least version
+                  number. The following macros are supported:
+      * Enable C++: AX_USE_CXX
+      * Enable LibTool library creation: AX_USE_LIBTOOL
+      * Enable Scripts: AX_USE_SCRIPTS
+      * Enable Doxygen documentation generation: AX_USE_DOXYGEN
+      * Enable Debian packaging by calling "make deb": AX_USE_DEBIAN_PACKAGING
+      * Enable RPM packaging by calling "make rpm": AX_USE_RPM_PACKAGING
+      * Enable C++ testing using CppUnit: AX_USE_CPPUNIT
+      * Enable C++ examples, i.e. for libraries: AX_BUILD_EXAMPLES
+      * Check for C++11 support: AX_CXX_COMPILE_STDCXX_11 (see ax_cxx_compile_stdcxx_11.m4)
+      * Require a QT module: AX_REQUIRE_QT (see ax_check_qt.m4)
+      * Optionally use a QT module: AX_CHECK_QT  (see ax_check_qt.m4)
+      * Require a module: AX_PKG_REQUIRE (see ax_init_standard_project.m4)
+      * Check for an optional module: AX_PKG_CHECK (see ax_init_standard_project.m4)
+
+EXAMPLES: src/makefile.am in a QT project
+
+  In this example, you wrote the following files:
+    * ${DEFAULT_PROJECT_NAME}.hxx - Qt Header file, passed to moc
+    * ${DEFAULT_PROJECT_NAME}.cxx - C++ file containing main()
+    * ${DEFAULT_PROJECT_NAME}.ui - UI file
+
+  All rules are implicitely added, all you need to do is to add the
+  following definitions, most lines are generic:
+
+bin_PROGRAMS = ${DEFAULT_PROJECT_NAME}
+${DEFAULT_PROJECT_NAME}_MOCFILES = moc_${DEFAULT_PROJECT_NAME}.cxx
+${DEFAULT_PROJECT_NAME}_UIFILES = ui_${DEFAULT_PROJECT_NAME}.hxx
+${DEFAULT_PROJECT_NAME}_SOURCES = version.cxx version.hxx ${DEFAULT_PROJECT_NAME}.cxx ${DEFAULT_PROJECT_NAME}_MOCFILES ${DEFAULT_PROJECT_NAME}_UIFILES
+BUILT_SOURCES = \${${DEFAULT_PROJECT_NAME}_MOCFILES} \${${DEFAULT_PROJECT_NAME}_UIFILES}
+EXTRA_DIST = \${${DEFAULT_PROJECT_NAME}_MOCFILES:moc_%.cxx=%.hxx} \${${DEFAULT_PROJECT_NAME}_UIFILES:ui_%.hxx=%.ui}
+MAINTAINERCLEANFILES = makefile.in
+EOF
+            exit;;
+        (*) break;;
+    esac
+    shift;
+done
+
+
+HEADER='## @id '"\$Id\$"'
+##
+## This file has been added:
+##  - by '${MY_NAME}'
+##  -  on '$(LANG= date +"%a, %d %B %Y %H:%M:%S %z")'
+## Feel free to change it or even remove and rebuild it, up to your needs
+##
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+'
+
+CHEADER='/** @id '"\$Id\$"'
+
+   This file has been added:
+     - by '${MY_NAME}'
+     - on '$(LANG= date +"%a, %d %B %Y %H:%M:%S %z")'
+
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+'
+
+notice() {
+    echo -e "\e[1;33m$*\e[0m"
+}
+
+run() {
+    check=1
+    while test $# -gt 0; do
+        case "$1" in
+            (--no-check) check=0;;
+            (*) break;;
+        esac
+        shift;
+    done
+    echo -en "\e[1m-> running:\e[0m $* ..."
+    result=$($* 2>&1)
+    res=$?
+    if test $res -ne 0; then
+        if test $check -eq 1; then
+            echo -e " \e[31merror\e[0m"
+            echo -e "\e[1m*** Failed with return code: $res\e[0m"
+            if test -n "$result"; then
+                echo "$result"
+            fi
+            exit 1
+        else
+            echo -e " \e[33mignored\e[0m"
+        fi
+    else
+        echo -e " \e[32msuccess\e[0m"
+    fi
+}
+
+testtag() {
+    local IFS="|"
+    egrep -q '^ *'"($*)" configure.ac
+}
+
+contains() {
+    local e
+    for e in "${@:2}"; do [[ "$e" == "$1" ]] && return 0; done
+    return 1
+}
+
+checkdir() {
+    if ! test -d "$1"; then # create path
+        run mkdir -p "$1"
+        run svn add "$1"
+    fi
+}
+
+checkfile() {
+    exists=0
+    if test -f "$1"; then
+        exists=1
+    fi
+    test $exists -eq 1
+}
+
+to() {
+    while test $# -gt 0; do
+        mode="u=rw,g=rw,o=r"
+        case "$1" in
+            (--condition) shift # test for a tag, abort if not set
+                if ! testtag "$1"; then
+                    return
+                fi;;
+            (--mode) shift # test for a tag, abort if not set
+                mode="$1";;
+            (*) break;;
+        esac
+        shift;
+    done
+    if checkfile "$1" && test $rebuild -eq 0 -o "$1" = "configure.ac" \
+        && ! contains "$1" "${rebuildfiles[@]}"; then
+        # file already exists and must not be rebuilt
+        return 1
+    fi
+    checkdir "$(dirname ${1})"
+    echo -en "\e[1m-> generating:\e[0m $1 ..."
+    result=$(cat > "$1" 2>&1)
+    res=$?
+    if test $res -ne 0; then
+        echo -e " \e[31merror\e[0m"
+        echo -e "\e[1m*** Failed with return code: $res\e[0m"
+        if test -n "$result"; then
+            echo "$result"
+        fi
+        exit 1
+    else
+        echo -e " \e[32msuccess\e[0m"
+    fi
+    chmod $mode $1
+    if test $exists -eq 0; then
+        run svn add "$1"
+        run svn propset svn:keywords "Id" "$1"
+    fi
+    return 0
+}
+
+copy() {
+    if  checkfile "$1" && test $overwrite -eq 0 \
+        && ! contains "$1" "${rebuildfiles[@]}"; then
+        # file already exists and must not be rebuilt
+        return
+    fi
+    run cp "${0%/*}/$1" "$1"
+    if test $exists -eq 0; then
+        run svn add "$1"
+        run svn propset svn:keywords "Id" "$1"
+    fi
+}
+
+doxyreplace() {
+    echo -en "\e[1m-> doxyfile:\e[0m configure $1 ..."
+    if sed -i 's|\(^'"$1"' *=\) *.*|\1'" $2"'|g' doc/doxyfile.in; then
+        echo -e " \e[32msuccess\e[0m"
+    else
+        echo -e " \e[31merror\e[0m"
+        echo -e "\e[1m**** command: $0 $*\e[0m"
+        exit 1
+    fi
+}
+
+doxyadd() {
+    echo -en "\e[1m-> doxyfile:\e[0m configure $1 ..."
+    if sed -i '/^'"$1"' *=/a'"$1"' += '"$2" doc/doxyfile.in; then
+        echo -e " \e[32msuccess\e[0m"
+    else
+        echo -e " \e[31merror\e[0m"
+        echo -e "\e[1m**** command: $0 $*\e[0m"
+        exit 1
+    fi
+}
+
+# Initialize the environment:
+copy ${MY_NAME}
+copy ax_init_standard_project.m4
+copy ax_cxx_compile_stdcxx_11.m4
+copy ax_check_qt.m4
+copy resolve-debbuilddeps.sh
+copy resolve-rpmbuilddeps.sh
+copy build-resource-file.sh
+copy mac-create-app-bundle.sh
+AUTHOR=$(gpg -K  | sed -n 's,uid *,,p' | sort | head -1)
+if test -z "${AUTHOR}"; then
+    AUTHOR="FIRSTNAME LASTNAME (URL) <EMAIL>"
+fi
+to AUTHORS <<EOF && notice "please edit AUTHORS"
+$AUTHOR
+EOF
+to NEWS <<EOF && notice "please edit NEWS"
+$(date) created ${DEFAULT_PROJECT_NAME}
+EOF
+to README <<EOF && notice "please edit README"
+${DEFAULT_PROJECT_NAME}
+
+add description for ${DEFAULT_PROJECT_NAME}
+EOF
+to configure.ac <<EOF && \
+    ( notice "please edit configure.ac, then rerun $0"; exit 0 )
+${HEADER}m4_define(x_package_name, ${DEFAULT_PROJECT_NAME}) # project's name
+m4_define(x_major, 0) # project's major version
+m4_define(x_minor, 0) # project's minor version
+m4_include(ax_init_standard_project.m4)
+AC_INIT(x_package_name, x_version, x_bugreport, x_package_name)
+AM_INIT_AUTOMAKE([1.9 tar-pax])
+AX_INIT_STANDARD_PROJECT
+
+# requirements, uncomment, what you need:
+#AX_USE_CXX
+#AX_USE_LIBTOOL
+#AX_USE_SCRIPTS
+#AX_USE_DOXYGEN
+#AX_USE_DEBIAN_PACKAGING
+#AX_USE_RPM_PACKAGING
+#AX_USE_CPPUNIT
+#AX_BUILD_EXAMPLES
+#AX_BUILD_HTML
+
+# qt features, uncomment, what you need:
+#AX_CHECK_QT([QT], [QtCore QtGui QtNetwork], [QtWidgets])
+#AX_REQUIRE_QT([QT], [QtCore QtGui QtNetwork], [QtWidgets])
+#AX_QT_NO_KEYWORDS
+
+# create output
+AC_OUTPUT
+EOF
+
+PACKAGE_NAME=$(sed -n 's/.*m4_define *( *x_package_name *, *\([^ ]*\) *).*/\1/p' configure.ac)
+SAVEIFS="$IFS"
+IFS="-" PackageName=( $PACKAGE_NAME )
+IFS="$SAVEIFS"
+PackageName=${PackageName[*]^}
+PackageName=${PackageName// /}
+
+if ! testtag "AX_CHECK_QT" configure.ac && \
+   ! testtag "AX_REQUIRE_QT" configure.ac; then
+    echo "${HEADER}MAINTAINERCLEANFILES = makefile.in" | \
+        to --condition AX_USE_CXX src/makefile.am
+else
+    to --condition AX_USE_CXX src/makefile.am <<EOF
+${HEADER}bin_PROGRAMS = ${PACKAGE_NAME}
+
+## required to enable the translation feature
+LANGUAGE_FILE_BASE = ${PACKAGE_NAME}
+
+## list here the Qt plugins your project depends on
+## required to build Mac OS-X app-bundle
+QT_PLUGINS = iconengines imageformats platforms
+
+#### enable if you deliver a KDE/Gnome desktop file
+#applicationsdir = ${datarootdir}/applications
+#dist_applications_DATA = ${PACKAGE_NAME}.desktop
+
+#### enable (ev. instead of bin_PROGRAMS) if you build a library
+#lib_LTLIBRARIES = ${PACKAGE_NAME}.la
+#${PACKAGE_NAME}_la_SOURCES = libmain.cxx version.cxx
+## noop to prevent:
+## «src/makefile.am: error: object 'version.\$(OBJEXT)' created both with
+## libtool and without»
+#${PACKAGE_NAME}_la_CXXFLAGS = \$(AM_CXXFLAGS)
+
+## list headers that are required for build, but that are not installed
+noinst_HEADERS = version.hxx
+
+## list all %.hxx files with Q_OBJECT as moc_%.cxx
+${PACKAGE_NAME//-/_}_MOCFILES = moc_${PACKAGE_NAME}.cxx
+
+## list all %.ui files as ui_%.hxx
+${PACKAGE_NAME//-/_}_UIFILES = ui_${PACKAGE_NAME}.hxx
+
+## list all %.qrc resource files as qrc_%.cxx
+## note: if there exists a directory %, the file %.qrc is generated from that
+${PACKAGE_NAME//-/_}_RESOURCES =  qrc_languages.cxx # qrc_resources.cxx
+
+## list all final translation files, list all supported languages here
+${PACKAGE_NAME//-/_}_TRANSLATIONS = \${LANGUAGE_FILE_BASE}_en.qm	\\
+     \${LANGUAGE_FILE_BASE}_de.qm \\
+     \${LANGUAGE_FILE_BASE}_fr.qm \\
+     \${LANGUAGE_FILE_BASE}_it.qm
+
+## list all C++ files that need translation
+${PACKAGE_NAME//-/_}_TR_FILES = main.cxx version.cxx
+
+## automatic assembly, no need to change
+${PACKAGE_NAME//-/_}_SOURCES = \${${PACKAGE_NAME//-/_}_TR_FILES} \${BUILT_SOURCES}
+
+## automatic assembly, no need to change
+BUILT_SOURCES = \${${PACKAGE_NAME//-/_}_MOCFILES} \
+                \${${PACKAGE_NAME//-/_}_UIFILES} \
+                \${${PACKAGE_NAME//-/_}_TRANSLATIONS} \
+                \${${PACKAGE_NAME//-/_}_RESOURCES}
+
+## automatic assembly, no need to change
+EXTRA_DIST_TR = \${${PACKAGE_NAME//-/_}_MOCFILES:moc_%.cxx=%.hxx} \
+                \${${PACKAGE_NAME//-/_}_UIFILES:ui_%.hxx=%.ui}
+
+## automatic assembly, no need to change
+## except: adapt the pre-delivered qt_%.qm list (language files you copy from qt
+EXTRA_DIST = \${EXTRA_DIST_TR} \
+             \${${PACKAGE_NAME//-/_}_RESOURCES:qrc_%.cxx:%.qrc} \
+             \${${PACKAGE_NAME//-/_}_TRANSLATIONS:%.qm=%.ts} \
+             qt_de.qm qt_fr.qm
+
+## automatic assembly, no need to change
+LANGUAGE_FILES = \${EXTRA_DIST_TR} \${${PACKAGE_NAME//-/_}_TR_FILES}
+
+MAINTAINERCLEANFILES = makefile.in
+EOF
+    to --condition AX_USE_CXX src/main.cxx <<EOF
+${CHEADER}#include <${PACKAGE_NAME}.hxx>
+#include <QApplication>
+#include <QCommandLineParser>
+#include <iostream>
+
+int main(int argc, char *argv[]) try {
+  QApplication a(argc, argv);
+  QCommandLineParser parser;
+  parser.addHelpOption();
+  parser.process(a);
+  QStringList scripts(parser.positionalArguments());
+  ${PackageName} w;
+  w.show();
+  return a.exec();
+ } catch (std::exception &x) {
+  std::cerr<<"**** error: "<<x.what()<<std::endl;
+  return 1;
+ }
+EOF
+    to --condition AX_USE_CXX src/${PACKAGE_NAME}.hxx <<EOF
+${CHEADER}#ifndef ${PackageName^^}_HXX
+#define ${PackageName^^}_HXX
+
+#include <QMainWindow>
+#include <ui_${PACKAGE_NAME}.hxx>
+
+/// Main Window
+/** Main window for ${PACKAGE_NAME} */
+class ${PackageName}: public QMainWindow, protected Ui::${PackageName} {
+    Q_OBJECT;
+  public:
+    explicit ${PackageName}(QWidget *parent = 0): QMainWindow(parent) {
+      setupUi(this);
+    }
+    virtual ~${PackageName}() {}
+};
+
+#endif
+EOF
+    to --condition AX_USE_CXX src/${PACKAGE_NAME}.ui <<EOF
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>${PackageName}</class>
+ <widget class="QMainWindow" name="${PackageName}">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>800</width>
+    <height>600</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>${PackageName}</string>
+  </property>
+  <widget class="QWidget" name="centralwidget"/>
+  <widget class="QMenuBar" name="menubar">
+   <property name="geometry">
+    <rect>
+     <x>0</x>
+     <y>0</y>
+     <width>800</width>
+     <height>22</height>
+    </rect>
+   </property>
+  </widget>
+  <widget class="QStatusBar" name="statusbar"/>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>
+EOF
+    to --condition AX_USE_CXX src/languages.qrc <<EOF
+<RCC>
+    <qresource prefix="/language">
+        <file>${PACKAGE_NAME}_de.qm</file>
+        <file>${PACKAGE_NAME}_fr.qm</file>
+        <file>${PACKAGE_NAME}_it.qm</file>
+        <file>${PACKAGE_NAME}_en.qm</file>
+    </qresource>
+</RCC>
+EOF
+fi
+to --condition AX_USE_CXX src/version.hxx <<EOF
+/*! @file
+
+    @id \$Id\$
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+#include <string>
+
+namespace NAMESPACE {
+  /// get package string which consists of package name and package version
+  std::string package_string();
+  /// get package name
+  std::string package_name();
+  /// get package version
+  std::string version();
+  /// get code build date
+  std::string build_date();
+  /// get author, i.e. copyright holder
+  std::string author();
+  /// get short package description (1st line of README)
+  std::string description();
+  /// get long package description (starting at 3rd line in README)
+  std::string readme();
+  /// get package logo file name
+  std::string logo();
+  /// get package icon file name
+  std::string icon();
+  /// used for <code>what filename</code>
+  extern const std::string WHAT;
+  /// used for <code>ident filename</code>
+  extern const std::string IDENT;
+}
+EOF
+to --condition AX_USE_CXX src/version.cxx <<EOF
+/*! @file
+
+    @id $Id\$
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+#include <string>
+
+namespace NAMESPACE {
+  std::string package_string() {
+    return PACKAGE_STRING;
+  }
+  std::string package_name() {
+    return PACKAGE_NAME;
+  }
+  std::string version() {
+    return PACKAGE_VERSION;
+  }
+  std::string build_date() {
+    return BUILD_DATE;
+  }
+  std::string author() {
+    return AUTHOR;
+  }
+  std::string description() {
+    return DESCRIPTION;
+  }
+  std::string readme() {
+    return README;
+  }
+  std::string logo() {
+    return PROJECT_LOGO;
+  }
+  std::string icon() {
+    return PROJECT_ICON;
+  }
+  const std::string WHAT("#(@) " PACKAGE_STRING);
+  const std::string IDENT("\$Id: " PACKAGE_STRING);
+}
+EOF
+echo "${HEADER}MAINTAINERCLEANFILES = makefile.in" | to --condition AX_USE_SCRIPTS scripts/makefile.am
+echo "${HEADER}MAINTAINERCLEANFILES = makefile.in" | to --condition AX_USE_DOXYGEN doc/makefile.am
+to --condition AX_USE_CPPUNIT test/makefile.am <<EOF
+${HEADER}AM_CPPFLAGS = -I\${top_srcdir}/src -I\${top_builddir}/src
+AM_LDFLAGS = -L\${abs_top_builddir}/src/.libs
+LDADD = -l${PACKAGE_NAME#lib}
+
+MAINTAINERCLEANFILES = makefile.in
+EOF
+to --condition AX_BUILD_EXAMPLES examples/makefile.am <<EOF
+${HEADER}AM_CPPFLAGS = -I\${top_srcdir}/src -I\${top_builddir}/src
+AM_LDFLAGS = -L\${abs_top_builddir}/src/.libs
+LDADD = -l${PACKAGE_NAME#lib}
+
+MAINTAINERCLEANFILES = makefile.in
+EOF
+to --condition AX_BUILD_HTML html/makefile.am <<EOF
+${HEADER}EXTRA_DIST = \${www_DATA}
+
+wwwdir = \${pkgdatadir}/html
+www_DATA = 
+
+MAINTAINERCLEANFILES = makefile.in
+EOF
+if testtag AX_USE_DOXYGEN; then
+    if ! checkfile doc/doxyfile.in || \
+        contains doc/doxyfile.in "${rebuildfiles[@]}"; then
+        run doxygen -g doc/doxyfile.in
+        if test $exists -eq 0; then
+            run svn add doc/doxyfile.in
+            run svn propset svn:keywords "Id" doc/doxyfile.in
+        fi
+        doxyreplace PROJECT_NAME "@PACKAGE_NAME@"
+        doxyreplace PROJECT_NUMBER "@PACKAGE_VERSION@"
+        doxyreplace PROJECT_BRIEF "@DESCRIPTION@"
+        doxyreplace PROJECT_LOGO "@PROJECT_LOGO@"
+        doxyreplace INLINE_INHERITED_MEMB YES
+        doxyreplace MULTILINE_CPP_IS_BRIEF YES
+        doxyreplace TAB_SIZE 2
+        doxyreplace ALIASES '"id=\\par File-ID\\n"'
+        doxyadd ALIASES '"copy=\\par Copyright\\n"'
+        doxyadd ALIASES '"license=\\par License\\n"'
+        doxyadd ALIASES '"classmutex=\\par Reentrant:\\nAccess is locked with class static mutex @c "'
+        doxyadd ALIASES '"instancemutex=\\par Reentrant:\\nAccess is locked with per instance mutex @c "'
+        doxyadd ALIASES '"mutex=\\par Reentrant:\\nAccess is locked with mutex @c "'
+        doxyreplace ENABLE_PREPROCESSING YES
+        doxyreplace MACRO_EXPANSION YES
+        doxyadd PREDEFINED '"NAMESPACE=@PACKAGE_NAME@"'
+        doxyreplace BUILTIN_STL_SUPPORT YES
+        doxyreplace DISTRIBUTE_GROUP_DOC YES
+        doxyreplace EXTRACT_ALL YES
+        doxyreplace EXTRACT_PACKAGE YES
+        doxyreplace EXTRACT_PRIVATE YES
+        doxyreplace EXTRACT_STATIC YES
+        doxyreplace EXTRACT_LOCAL_CLASSES YES
+        doxyreplace EXTRACT_LOCAL_METHODS YES
+        doxyreplace EXTRACT_ANON_NSPACES YES
+        doxyreplace SHOW_GROUPED_MEMB_INC YES
+        doxyreplace SORT_MEMBERS_CTORS_1ST YES
+        doxyreplace WARN_IF_UNDOCUMENTED NO
+        doxyreplace WARN_LOGFILE doxygen.errors
+        doxyreplace INPUT "@top_srcdir@/src"
+        if testtag AX_USE_SCRIPTS; then
+            doxyadd INPUT "@top_srcdir@/scripts"
+        fi
+        if testtag AX_BUILD_HTML; then
+            doxyadd INPUT "@top_srcdir@/html"
+        fi
+        if testtag AX_USE_CPPUNIT; then
+            doxyadd INPUT "@top_srcdir@/test"
+        fi
+        doxyreplace FILE_PATTERNS '*.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.idl *.ddl *.odl *.h *.hh *.hxx *.hpp *.h++ *.cs *.d *.php *.php4 *.php5 *.phtml *.inc *.m *.markdown *.md *.mm *.dox *.py *.f90 *.f *.for *.tcl *.vhd *.vhdl *.ucf *.qsf *.as *.js *.wt'
+        doxyreplace RECURSIVE YES
+        doxyreplace EXCLUDE_PATTERNS "moc_* uic_* qrc_*"
+        if testtag AX_BUILD_EXAMPLES; then
+            doxyreplace EXAMPLE_PATH @top_srcdir@/examples
+        fi
+        doxyreplace EXAMPLE_RECURSIVE YES
+        doxyreplace FILTER_PATTERNS '*.wt=doxygen-webtester.sed'
+        doxyreplace SOURCE_BROWSER YES
+        doxyreplace INLINE_SOURCES YES
+        doxyreplace GENERATE_TESTLIST YES
+        doxyreplace GENERATE_TREEVIEW NO
+        doxyreplace SEARCHENGINE YES
+        doxyreplace GENERATE_HTML YES
+        doxyreplace GENERATE_LATEX NO
+        doxyreplace LATEX_BATCHMODE YES
+        doxyreplace LATEX_HIDE_INDICES YES
+        doxyreplace COMPACT_RTF YES
+        doxyreplace RTF_HYPERLINKS YES
+        doxyreplace GENERATE_TAGFILE "@PACKAGE_NAME@.doxytag"
+        doxyreplace HIDE_UNDOC_RELATIONS NO
+        doxyreplace HAVE_DOT YES
+        doxyreplace CLASS_GRAPH YES
+        doxyreplace TEMPLATE_RELATIONS YES
+        doxyreplace DOT_IMAGE_FORMAT svg
+        doxyreplace INTERACTIVE_SVG YES
+        doxyreplace DOT_TRANSPARENT YES
+    fi
+fi
+if testtag AX_USE_DEBIAN_PACKAGING; then
+    checkdir debian
+    to debian/changelog.in <<EOF
+@PACKAGE@ (@PACKAGE_VERSION@~@DISTRO@.@BUILD_NUMBER@) @DISTRO@; urgency=low
+
+  * Please see ChangeLog of @PACKAGE@
+
+ -- @AUTHOR@  @BUILD_DATE@
+EOF
+    to debian/control.in <<EOF
+Source: @PACKAGE_NAME@
+Priority: extra
+Maintainer: @AUTHOR@
+Build-Depends: debhelper, subversion, pkg-config, autotools-dev, lsb-release $(if testtag AX_USE_DOXYGEN; then echo -n ", doxygen, graphviz, mscgen"; fi; if testtag AX_USE_CPPUNIT; then echo -n ", libcppunit-dev"; fi; if testtag AX_CXX_QT || testtag AX_CHECK_QT AX_REQUIRE_QT; then echo -n ", qt5-default | qt4-default | qt5-qmake | qt4-qmake, qtbase5-dev | libqt4-dev, qtbase5-dev-tools | qt4-dev-tools, qttools5-dev-tools | qt4-dev-tools, qttools5-dev-tools | qt4-dev-tools"; fi)
+
+Package: @PACKAGE_NAME@
+Section: $(if testtag AX_USE_LIBTOOL; then echo  "libs"; fi)
+Architecture: any
+Depends: \${shlibs:Depends}, \${misc:Depends}
+Description: @DESCRIPTION@
+@README_DEB@
+$(      if testtag AX_USE_LIBTOOL; then
+            cat <<EOF2
+
+Package: @PACKAGE_NAME@-dev
+Section: libdevel
+Architecture: any
+Depends: @PACKAGE_NAME@ (= \${binary:Version})
+Description: @DESCRIPTION@ - Development Package
+@README_DEB@
+EOF2
+          fi)
+EOF
+    to debian/docs <<EOF
+NEWS
+README
+EOF
+    to --condition AX_USE_LIBTOOL debian/${PACKAGE_NAME}.install <<EOF
+usr/lib/lib*.so.*
+EOF
+    to --condition AX_USE_LIBTOOL debian/${PACKAGE_NAME}-dev.install <<EOF
+usr/include/*
+usr/lib/lib*.a
+usr/lib/lib*.so
+usr/lib/pkgconfig/*
+usr/lib/*.la
+usr/share/${PACKAGE_NAME}
+usr/share/doc/${PACKAGE_NAME}/html
+EOF
+    to --mode "u=rwx,g=rwx,o=rx" debian/rules <<EOF
+${HEADER}%:
+	dh \$@
+EOF
+    echo 7 | to debian/compat
+fi
+to --condition AX_USE_RPM_PACKAGING ${PACKAGE_NAME}.spec.in <<EOF
+Summary: @DESCRIPTION@
+Name: @PACKAGE_NAME@
+Version: @VERSION@
+Release: @BUILD_NUMBER@%{?dist}
+License: LGPL
+Group: $(if testtag AX_USE_LIBTOOL; then
+  echo Development/Libraries/C++;
+else
+  echo Applications/...;
+fi)
+Source0: %{name}-%{version}.tar.gz
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
+BuildRequires: gnupg, subversion, automake, autoconf$(
+    if testtag AX_USE_DOXYGEN; then
+      echo -n ", doxygen";
+    fi)
+%if 0%{?fedora} != 20
+$(if testtag AX_USE_DOXYGEN; then echo -n "BuildRequires: graphviz"; fi)
+%endif
+%if 0%{?fedora} || 0%{?rhel} || 0%{?rhl} || 0%{?centos} || 0%{?centos_ver} || 0%{?centos_version}
+BuildRequires: pkgconfig, redhat-lsb$(
+    if testtag AX_USE_CPPUNIT; then
+      echo -n ", cppunit-devel";
+    fi)
+%if ! ( 0%{?centos} || 0%{?centos_ver} || 0%{?centos_version} )
+$(if testtag AX_USE_DOXYGEN; then echo -n "BuildRequires: mscgen"; fi)
+$(if testtag AX_REQUIRE_QT || testtag AX_CHECK_QT AX_REQUIRE_QT; then echo -n "BuildRequires: qt5-qtbase-devel, qt5-qttools, qt5-qtwebkit-devel"; fi)
+%else
+$(if testtag AX_REQUIRE_QT || testtag AX_CHECK_QT AX_REQUIRE_QT; then echo -n "BuildRequires: qt-devel"; fi)
+%endif
+%else%if 0%{?suse_version} || 0%{?sles_version}
+BuildRequires: pkg-config, lsb-release$(
+    if testtag AX_USE_CPPUNIT; then
+      echo -n ", libcppunit-devel";
+    fi)
+%if 0%{?suse_version} < 1200 ||  0%{?sles_version} < 1200
+$(if testtag AX_REQUIRE_QT || testtag AX_CHECK_QT AX_REQUIRE_QT; then echo -n "BuildRequires: libqt4-devel, qt4-x11-tools, libQtWebKit-devel"; fi)
+%else
+$(if testtag AX_REQUIRE_QT || testtag AX_CHECK_QT AX_REQUIRE_QT; then echo -n "BuildRequires: libqt5-qtbase-devel, libqt5-qttools, libQt5WebKit5-devel"; fi)
+%endif
+%endif%endif
+
+%description
+@README@
+$(if testtag AX_USE_LIBTOOL; then
+echo
+echo This package contains only the shared libraries required at runtime.
+fi)
+
+
+%prep
+%setup -q
+./configure --prefix=/usr \\
+            --sysconfdir=/etc \\
+            --docdir=/usr/share/doc/packages/@PACKAGE_NAME@ \\
+            --libdir=/usr/%_lib
+
+%build
+make
+
+%install
+DESTDIR=\$RPM_BUILD_ROOT make install
+
+%clean
+rm -rf \$RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root,-)
+$(if testtag AX_USE_LIBTOOL; then
+echo '/usr/%_lib/@PACKAGE_NAME@.so.*'
+else
+echo '/usr/bin/*'
+fi)
+%doc
+$(if testtag AX_USE_LIBTOOL; then
+  cat <<EOF2
+/usr/share/doc/packages/@PACKAGE_NAME@/AUTHORS
+/usr/share/doc/packages/@PACKAGE_NAME@/COPYING
+/usr/share/doc/packages/@PACKAGE_NAME@/ChangeLog
+/usr/share/doc/packages/@PACKAGE_NAME@/INSTALL
+/usr/share/doc/packages/@PACKAGE_NAME@/NEWS
+/usr/share/doc/packages/@PACKAGE_NAME@/README
+EOF2
+else
+  echo '/usr/share/*'
+fi)
+
+$(if testtag AX_USE_LIBTOOL; then
+cat <<EOF2
+%package devel
+Summary: @DESCRIPTION@
+Group: Development/Libraries/C++
+Requires: @PACKAGE_NAME@ = @VERSION@
+
+%description devel
+@README@
+
+This Package contains all files required for developement.
+
+%files devel
+%defattr(-,root,root,-)
+/usr/%_lib/@PACKAGE_NAME@.so
+/usr/%_lib/@PACKAGE_NAME@.a
+/usr/%_lib/@PACKAGE_NAME@.la
+/usr/%_lib/pkgconfig
+/usr/include/*
+%doc
+/usr/share/@PACKAGE_NAME@
+/usr/share/doc/packages/@PACKAGE_NAME@/html
+EOF2
+fi)
+
+%changelog
+
+EOF
+SUBDIRS=""
+for d in src test scripts doc examples html; do
+    test -d $d && SUBDIRS="${SUBDIRS} $d"
+done
+to makefile.am<<EOF
+${HEADER}SUBDIRS =${SUBDIRS}
+
+doc_DATA = AUTHORS NEWS README COPYING INSTALL ChangeLog
+
+MAINTAINERCLEANFILES = makefile.in
+EOF
+to --condition AX_USE_LIBTOOL src/${PACKAGE_NAME}.pc.in <<EOF
+${HEADER}prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=\${exec_prefix}/lib
+includedir=\${prefix}/include
+translationsdir=@datadir@/@PACKAGE_NAME@/translations
+
+Name: @PACKAGE_NAME@
+Description: @DESCRIPTION@
+Version: @VERSION@
+Libs: -L\${libdir} -l${PACKAGE_NAME#lib} @LDFLAGS@
+Cflags: -I\${includedir} @CPPFLAGS@
+Requires: @PKG_REQUIREMENTS@
+EOF
+
+#### Cleanup If Makefile Exists ####
+if test -f makefile; then
+    run --no-check make distclean
+fi
+
+#### Bootstrap Before Configure ####
+run --no-check svn2cl
+run aclocal
+if testtag AX_USE_LIBTOOL; then run libtoolize --force; fi
+run automake -a
+run autoconf
+
+#### Run Configure If User Requires ####
+if test "$configure" -eq 1; then
+    ./configure $*
+fi
+
+#### Run Make If User Requires ####
+if test "$build" -eq 1; then
+    make $buildtarget
+fi

build-resource-file.sh

@@ -0,0 +1,31 @@
+#! /bin/bash -ex
+
+## @id $Id$
+
+## build resource.qrc file from a resource directory
+##
+## Argument: $1: resource path (default: resources)
+## Result: file named <resource-path>.qrc (default: resources.qrc)
+##
+## Call:
+##
+##   cd src
+##   ../build-resource-file.sh
+
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+RESOURCES=${1:-resources}
+TARGET=${RESOURCES}.qrc
+
+test -d ${RESOURCES}
+
+echo "<RCC>" > ${TARGET}
+for d in $(find resources -mindepth 1 -type d); do
+    echo "  <qresource prefix=\"${d#${RESOURCES}/}\">" >> ${TARGET}
+    for f in $(find $d -mindepth 1 -maxdepth 1 -type f); do
+        echo "    <file alias=\"${f##*/}\">$f</file>" >> ${TARGET}
+    done
+    echo "  </qresource>" >> ${TARGET}
+done
+echo "</RCC>" >> ${TARGET}

certman.spec.in

@@ -0,0 +1,60 @@
+Summary: @DESCRIPTION@
+Name: @PACKAGE_NAME@
+Version: @VERSION@
+Release: @BUILD_NUMBER@%{?dist}
+License: LGPL
+Group: Applications/...
+Source0: %{name}-%{version}.tar.gz
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
+BuildRequires: gnupg, subversion, automake, autoconf, doxygen
+%if 0%{?fedora} != 20
+BuildRequires: graphviz
+%endif
+%if 0%{?fedora} || 0%{?rhel} || 0%{?rhl} || 0%{?centos} || 0%{?centos_ver} || 0%{?centos_version}
+BuildRequires: pkgconfig, redhat-lsb
+%if ! ( 0%{?centos} || 0%{?centos_ver} || 0%{?centos_version} )
+BuildRequires: mscgen
+BuildRequires: qt5-qtbase-devel, qt5-qttools, qt5-qtwebkit-devel
+%else
+BuildRequires: qt-devel
+%endif
+%else%if 0%{?suse_version} || 0%{?sles_version}
+BuildRequires: pkg-config, lsb-release
+%if 0%{?suse_version} < 1200 ||  0%{?sles_version} < 1200
+BuildRequires: libqt4-devel, qt4-x11-tools, libQtWebKit-devel
+%else
+BuildRequires: libqt5-qtbase-devel, libqt5-qttools, libQt5WebKit5-devel
+%endif
+%endif%endif
+
+%description
+@README@
+
+
+
+%prep
+%setup -q
+./configure --prefix=/usr \
+            --sysconfdir=/etc \
+            --docdir=/usr/share/doc/packages/@PACKAGE_NAME@ \
+            --libdir=/usr/%_lib
+
+%build
+make
+
+%install
+DESTDIR=$RPM_BUILD_ROOT make install
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root,-)
+/usr/bin/*
+%doc
+/usr/share/*
+
+
+
+%changelog
+

configure.ac

@@ -0,0 +1,34 @@
+## @id $Id$
+#
+# This file has been added by bootstrap.sh on Thu, 08 October 2015 10:51:35 +0200
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+m4_define(x_package_name, certman) # project's name
+m4_define(x_major, 0) # project's major version
+m4_define(x_minor, 1) # project's minor version
+m4_include(ax_init_standard_project.m4)
+AC_INIT(x_package_name, x_version, x_bugreport, x_package_name)
+AM_INIT_AUTOMAKE([1.9 tar-pax])
+AX_INIT_STANDARD_PROJECT
+
+# requirements, uncomment, what you need:
+AX_USE_CXX
+#AX_USE_LIBTOOL
+#AX_USE_SCRIPTS
+AX_USE_DOXYGEN
+AX_USE_DEBIAN_PACKAGING
+AX_USE_RPM_PACKAGING
+#AX_USE_CPPUNIT
+#AX_BUILD_EXAMPLES
+#AX_BUILD_HTML
+
+# qt features, uncomment, what you need:
+#AX_CHECK_QT([QT], [QtCore QtGui QtNetwork], [QtWidgets])
+AX_REQUIRE_QT([QT], [QtCore QtGui QtNetwork], [QtWidgets])
+#AX_QT_NO_KEYWORDS
+
+# create output
+AC_OUTPUT

debian/changelog.in

@@ -0,0 +1,5 @@
+@PACKAGE@ (@PACKAGE_VERSION@~@DISTRO@.@BUILD_NUMBER@) @DISTRO@; urgency=low
+
+  * Please see ChangeLog of @PACKAGE@
+
+ -- @AUTHOR@  @BUILD_DATE@

debian/compat

@@ -0,0 +1 @@
+7

debian/control.in

@@ -0,0 +1,12 @@
+Source: @PACKAGE_NAME@
+Priority: extra
+Maintainer: @AUTHOR@
+Build-Depends: debhelper, subversion, pkg-config, autotools-dev, lsb-release , doxygen, graphviz, mscgen, qt5-default | qt4-default | qt5-qmake | qt4-qmake, qtbase5-dev | libqt4-dev, qtbase5-dev-tools | qt4-dev-tools, qttools5-dev-tools | qt4-dev-tools, qttools5-dev-tools | qt4-dev-tools
+
+Package: @PACKAGE_NAME@
+Section: 
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: @DESCRIPTION@
+@README_DEB@
+

debian/docs

@@ -0,0 +1,2 @@
+NEWS
+README

debian/rules

@@ -0,0 +1,10 @@
+## @id $Id$
+#
+# This file has been added by bootstrap.sh on Thu, 08 October 2015 11:04:32 +0200
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+%:
+	dh $@

doc/doxyfile.in

@@ -0,0 +1,2309 @@
+# Doxyfile 1.8.6
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = @PACKAGE_NAME@
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         = @PACKAGE_VERSION@
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          = @DESCRIPTION@
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
+# the documentation. The maximum height of the logo should not exceed 55 pixels
+# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
+# to the output directory.
+
+PROJECT_LOGO           = @PROJECT_LOGO@
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       =
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = YES
+
+# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = YES
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
+# new page for each member. If set to NO, the documentation of a member will be
+# part of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 2
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                = "id=\par File-ID\n"
+ALIASES += "mutex=\par Reentrant:\nAccess is locked with mutex @c "
+ALIASES += "instancemutex=\par Reentrant:\nAccess is locked with per instance mutex @c "
+ALIASES += "classmutex=\par Reentrant:\nAccess is locked with class static mutex @c "
+ALIASES += "license=\par License\n"
+ALIASES += "copy=\par Copyright\n"
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C.
+#
+# Note For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = YES
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by by putting a % sign in front of the word
+# or globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = YES
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = YES
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = YES
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = YES
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO these classes will be included in the various overviews. This option has
+# no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = YES
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
+# todo list. This list is created by putting \todo commands in the
+# documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
+# test list. This list is created by putting \test commands in the
+# documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES the list
+# will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. Do not use file names with spaces, bibtex cannot handle them. See
+# also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = NO
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO doxygen will only warn about wrong or incomplete parameter
+# documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           = doxygen.errors
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = @top_srcdir@/src
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.idl *.ddl *.odl *.h *.hh *.hxx *.hpp *.h++ *.cs *.d *.php *.php4 *.php5 *.phtml *.inc *.m *.markdown *.md *.mm *.dox *.py *.f90 *.f *.for *.tcl *.vhd *.vhdl *.ucf *.qsf *.as *.js *.wt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = moc_* uic_* qrc_*
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = YES
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        = *.wt=doxygen-webtester.sed
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER ) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
+# defined cascading style sheet that is included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefor more robust against future updates.
+# Doxygen will copy the style sheet file to the output directory. For an example
+# see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the stylesheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler ( hhc.exe). If non-empty
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated (
+# YES) or that it should be included in the master .chm file ( NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated (
+# YES) or a normal table of contents ( NO) in the .chm file.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavours of web server based searching depending on the
+# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
+# searching and an index file used by the script. When EXTERNAL_SEARCH is
+# enabled the indexing and searching needs to be provided by external tools. See
+# the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer ( doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer ( doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will
+# replace them by respectively the title of the page, the current date and time,
+# only the current date, the version number of doxygen, the project name (see
+# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = YES
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = YES
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = YES
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a
+# validating XML parser to check the syntax of the XML files.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify a XML DTD, which can be used by a
+# validating XML parser to check the syntax of the XML files.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
+# Definitions (see http://autogen.sf.net) file that captures the structure of
+# the code including all documentation. Note that this feature is still
+# experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
+# in the source code. If set to NO only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES the includes files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             =
+PREDEFINED += "NAMESPACE=@PACKAGE_NAME@"
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all refrences to function-like macros that are alone on a line, have an
+# all uppercase name, and do not end with a semicolon. Such function macros are
+# typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have an unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       = @PACKAGE_NAME@.doxytag
+
+# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
+# class index. If set to NO only the inherited external classes will be listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
+# the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES, the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = NO
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font n the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = YES
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = svg
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = YES
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES

doc/makefile.am

@@ -0,0 +1,9 @@
+## @id $Id$
+#
+# This file has been added by bootstrap.sh on Thu, 08 October 2015 11:04:32 +0200
+# Feel free to change it or even remove and rebuild it, up to your needs
+#
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+MAINTAINERCLEANFILES = makefile.in

mac-create-app-bundle.sh

@@ -0,0 +1,103 @@
+#!/bin/bash -ex
+
+## @id $Id$
+##
+## Create Mac OS-X App Bundle from built file
+##
+## Parameters:
+##  $1: name of the app-target
+##  $2: name of the project
+##  $3: installation source
+##
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+if test "$(uname -s)" != "Darwin"; then
+    echo "**** ERROR: run on Mac OS-X: $0"
+    exit 1
+fi
+test -n "$1"
+test -n "$2"
+test -d "$3"
+target="$(pwd)/${1}/Contents/MacOS"
+
+# Step 1: create and fill app directory structure
+mkdir -p ${1}/Contents/{Resources,MacOS}
+! test -d ${3}/bin || \
+     find ${3}/bin -mindepth 1 -maxdepth 1 -exec mv {} ${1}/Contents/MacOS/ \;
+executablefile=$(ls -1 ${1}/Contents/MacOS/ | head -1)
+! test -d ${3}/lib || \
+    find ${3}/lib -mindepth 1 -maxdepth 1 -exec mv {} ${1}/Contents/MacOS/ \;
+! test -d ${3}/share/${2} || \
+    find ${3}/share/${2} -mindepth 1 -maxdepth 1 -exec mv {} ${1}/Contents/Resources/ \;
+! test -d ${3}/share/${2} || rmdir ${3}/share/${2}
+! test -d ${3}/share || \
+    find ${3}/share -mindepth 1 -maxdepth 1 -exec mv {} ${1}/Contents/Resources/ \;
+! test -d ${3}/bin || rmdir ${3}/bin
+! test -d ${3}/lib || rmdir ${3}/lib
+! test -d ${3}/share || rmdir ${3}/share
+! test -d ${3} || \
+    find ${3} -mindepth 1 -maxdepth 1 -exec mv {} ${1}/Contents/Resources/ \;
+! test -d ${3} || rmdir ${3}
+! test -d ${1}/tmp || rm -r ${1}/tmp
+
+# Step 2: copy qt plugins, if necessary
+for f in ${QT_PLUGINS}; do
+    test -d ${target}/${f} \
+        || cp -r ${QT_PLUGIN_PATH}/${f} ${target}/${f} \
+        || exit 1
+done
+
+# Step 3: resolve all library dependencies
+found=1
+oldpath="$(pwd)"
+while [ $found -ne 0 ]; do
+    found=0
+    cd "${target}"
+    for file in $(find . -type f); do
+        for lib in $(otool -L ${file} | tail -n +2 \
+            | egrep '/opt/local/|'"${HOME}" \
+            | grep -v $file | awk '{print $1}'); do
+            found=1
+            test -f ${lib##*/} \
+                || ( \
+                cp ${lib} . \
+                && chmod u+w ${lib##*/} \
+                ) \
+                || exit 1
+            install_name_tool -change ${lib} \
+                @executable_path/${lib##*/} ${file} \
+                || exit 1
+        done
+    done
+done
+cd ${oldpath}
+
+# Step 4: if necessary, install qt_menu.nib
+if test -n "${QTDIR}"; then
+    MENU_NIB=$(find ${QTDIR} -name .svn -prune -o -name qt_menu.nib -print \
+               | head -1)
+    if test -e "${MENU_NIB}"; then
+        rsync -r "${MENU_NIB}" ${1}/Contents/Resources/
+        test -d ${1}/Contents/Resources/qt_menu.nib
+    fi
+fi
+
+# Step 5: copy or create info.plist
+infoplist=$(find ${1}/Contents/Resources -name Info.plist)
+if test -f "${infoplist}"; then
+    mv "${infoplist}" ${1}/Contents/Info.plist
+else
+    cat > ${1}/Contents/Info.plist <<EOF
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+  <dict>
+    <key>CFBundleIdentifier</key>
+    <string>${2}</string>
+    <key>CFBundleExecutable</key>
+    <string>${executablefile##/}</string>
+  </dict>
+</plist>
+EOF
+fi

makefile.am

@@ -0,0 +1,15 @@
+## @id $Id$
+##
+## This file has been added:
+##  - by bootstrap.sh
+##  -  on Thu, 08 October 2015 12:04:09 +0200
+## Feel free to change it or even remove and rebuild it, up to your needs
+##
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+SUBDIRS = src doc
+
+doc_DATA = AUTHORS NEWS README COPYING INSTALL ChangeLog
+
+MAINTAINERCLEANFILES = makefile.in

resolve-debbuilddeps.sh

@@ -0,0 +1,44 @@
+#! /bin/bash -ex
+
+## @id $Id$
+
+## Resolve Debian Build Dependencies
+## Installs all the required packages
+## Call: ./resolve-debbuilddeps 'name of build schroot'
+## e.g. call: ./resolve-debbuilddeps trusty_amd64
+
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+SCHROOTNAME="$1"
+
+sed 's,@[^@]*@, dummytext,g' debian/control.in > debian/control
+
+if test -n "${SCHROOTNAME}"; then
+  DEPS=$(schroot -c "${SCHROOTNAME}" -- dpkg-checkbuilddeps 2>&1 || true)
+else
+  DEPS=$(dpkg-checkbuilddeps 2>&1 || true)
+fi
+DEPS=$(echo "$DEPS" | sed -n '/Unmet build dependencies/ { s,.*Unmet build dependencies: ,,g; s, ([^)]*),,g; s, *| *,|,g; p}')
+
+for pa in ${DEPS}; do
+    success=0
+    for p in $(echo "${pa}" | sed 's,|, ,g'); do
+        if test -n "${SCHROOTNAME}"; then
+            if schroot -c "${SCHROOTNAME}" -u root -d / -- apt-get -y install ${p}; then
+                success=1
+                break;
+            fi
+        else
+            if sudo apt-get -y install ${p}; then
+                success=1
+                break;
+            fi
+        fi
+    done
+    if test ${success} -eq 0; then
+        echo "**** Error: Installation Failed: ${pa}"
+    fi
+done
+
+echo "**** Success: All Dependencies Resolved"

resolve-rpmbuilddeps.sh

@@ -0,0 +1,34 @@
+#! /bin/bash -ex
+
+## @id $Id$
+
+## Resolve RPM Build Dependencies
+## Installs all the required packages
+## Call: ./resolve-rpmbuilddeps 'name of build schroot'
+## e.g. call: ./resolve-rpmbuilddeps opensuse-13.2_x86_64
+
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+SCHROOTNAME="$1"
+PACKAGE_NAME=$(sed -n 's/^ *m4_define(x_package_name, \(.*\)).*/\1/p' configure.ac)
+
+if test -n "${SCHROOTNAME}"; then
+    schroot -c ${SCHROOTNAME} -- ./bootstrap.sh -t dist
+    FILES=$(LANG= schroot -c ${SCHROOTNAME} -- rpmbuild -bb --clean --nobuild --define "_topdir ." --define "_sourcedir ." ${PACKAGE_NAME}.spec  2>&1 | sed -n 's, is needed by.*,,p')
+    if test -n "${FILES}"; then
+        schroot -c ${SCHROOTNAME} -u root -- yum install -y ${FILES} || \
+            schroot -c ${SCHROOTNAME} -u root -- zypper install -y ${FILES} || \
+        schroot -c ${SCHROOTNAME} -u root -- dnf install -y ${FILES}
+    fi
+else
+    ./bootstrap.sh -t dist
+    FILES=$(LANG= rpmbuild -bb --clean --nobuild --define "_topdir ." --define "_sourcedir ." ${PACKAGE_NAME}.spec 2>&1 | sed -n 's, is needed by.*,,p')
+    if test -n "${FILES}"; then
+        yum install -y ${FILES} || \
+            zypper install -y ${FILES} || \
+            dnf install -y ${FILES}
+    fi
+fi
+
+echo "**** Success: All Dependencies Resolved"

src/certman.hxx

@@ -0,0 +1,28 @@
+/** @id $Id$
+
+   This file has been added:
+     - by bootstrap.sh
+     - on Thu, 08 October 2015 11:56:48 +0200
+
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+#ifndef CERTMAN_HXX
+#define CERTMAN_HXX
+
+#include <QMainWindow>
+#include <ui_certman.hxx>
+
+/// Main Window
+/** Main window for certman */
+class CertMan: public QMainWindow, protected Ui::CertMan {
+    Q_OBJECT;
+  public:
+    explicit CertMan(QWidget *parent = 0): QMainWindow(parent) {
+      setupUi(this);
+    }
+    virtual ~CertMan() {}
+};
+
+#endif

src/certman.ui

@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>CertMan</class>
+ <widget class="QMainWindow" name="CertMan">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>800</width>
+    <height>600</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>CertMan</string>
+  </property>
+  <widget class="QWidget" name="centralwidget"/>
+  <widget class="QMenuBar" name="menubar">
+   <property name="geometry">
+    <rect>
+     <x>0</x>
+     <y>0</y>
+     <width>800</width>
+     <height>22</height>
+    </rect>
+   </property>
+  </widget>
+  <widget class="QStatusBar" name="statusbar"/>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>

src/languages.qrc

@@ -0,0 +1,8 @@
+<RCC>
+    <qresource prefix="/language">
+        <file>certman_de.qm</file>
+        <file>certman_fr.qm</file>
+        <file>certman_it.qm</file>
+        <file>certman_en.qm</file>
+    </qresource>
+</RCC>

src/main.cxx

@@ -0,0 +1,28 @@
+/** @id $Id$
+
+   This file has been added:
+     - by bootstrap.sh
+     - on Thu, 08 October 2015 11:56:48 +0200
+
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+#include <certman.hxx>
+#include <QApplication>
+#include <QCommandLineParser>
+#include <iostream>
+
+int main(int argc, char *argv[]) try {
+  QApplication a(argc, argv);
+  QCommandLineParser parser;
+  parser.addHelpOption();
+  parser.process(a);
+  QStringList scripts(parser.positionalArguments());
+  CertMan w;
+  w.show();
+  return a.exec();
+ } catch (std::exception &x) {
+  std::cerr<<"**** error: "<<x.what()<<std::endl;
+  return 1;
+ }

src/makefile.am

@@ -0,0 +1,70 @@
+## @id $Id$
+##
+## This file has been added:
+##  - by bootstrap.sh
+##  -  on Thu, 08 October 2015 13:20:39 +0200
+## Feel free to change it or even remove and rebuild it, up to your needs
+##
+##       1         2         3         4         5         6         7         8
+## 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+bin_PROGRAMS = certman
+
+## required to enable the translation feature
+LANGUAGE_FILE_BASE = certman
+
+## list here the Qt plugins your project depends on
+## required to build Mac OS-X app-bundle
+QT_PLUGINS = iconengines imageformats platforms
+
+#### enable if you deliver a KDE/Gnome desktop file
+#applicationsdir = /applications
+#dist_applications_DATA = certman.desktop
+
+#### enable (ev. instead of bin_PROGRAMS) if you build a library
+#lib_LTLIBRARIES = certman.la
+#certman_la_SOURCES = libmain.cxx version.cxx
+## noop to prevent:
+## «src/makefile.am: error: object 'version.$(OBJEXT)' created both with
+## libtool and without»
+#certman_la_CXXFLAGS = $(AM_CXXFLAGS)
+
+## list headers that are required for build, but that are not installed
+noinst_HEADERS = version.hxx
+
+## list all %.hxx files with Q_OBJECT as moc_%.cxx
+certman_MOCFILES = moc_certman.cxx
+
+## list all %.ui files as ui_%.hxx
+certman_UIFILES = ui_certman.hxx
+
+## list all %.qrc resource files as qrc_%.cxx
+## note: if there exists a directory %, the file %.qrc is generated from that
+certman_RESOURCES =  qrc_languages.cxx # qrc_resources.cxx
+
+## list all final translation files, list all supported languages here
+certman_TRANSLATIONS = ${LANGUAGE_FILE_BASE}_en.qm	\
+     ${LANGUAGE_FILE_BASE}_de.qm \
+     ${LANGUAGE_FILE_BASE}_fr.qm \
+     ${LANGUAGE_FILE_BASE}_it.qm
+
+## list all C++ files that need translation
+certman_TR_FILES = main.cxx version.cxx
+
+## automatic assembly, no need to change
+certman_SOURCES = ${certman_TR_FILES} ${BUILT_SOURCES}
+
+## automatic assembly, no need to change
+BUILT_SOURCES = ${certman_MOCFILES}                 ${certman_UIFILES}                 ${certman_TRANSLATIONS}                 ${certman_RESOURCES}
+
+## automatic assembly, no need to change
+EXTRA_DIST_TR = ${certman_MOCFILES:moc_%.cxx=%.hxx}                 ${certman_UIFILES:ui_%.hxx=%.ui}
+
+## automatic assembly, no need to change
+## except: adapt the pre-delivered qt_%.qm list (language files you copy from qt
+EXTRA_DIST = ${EXTRA_DIST_TR}              ${certman_RESOURCES:qrc_%.cxx:%.qrc}              ${certman_TRANSLATIONS:%.qm=%.ts}              qt_de.qm qt_fr.qm
+
+## automatic assembly, no need to change
+LANGUAGE_FILES = ${EXTRA_DIST_TR} ${certman_TR_FILES}
+
+MAINTAINERCLEANFILES = makefile.in

src/version.cxx

@@ -0,0 +1,40 @@
+/*! @file
+
+    @id $
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+#include <string>
+
+namespace NAMESPACE {
+  std::string package_string() {
+    return PACKAGE_STRING;
+  }
+  std::string package_name() {
+    return PACKAGE_NAME;
+  }
+  std::string version() {
+    return PACKAGE_VERSION;
+  }
+  std::string build_date() {
+    return BUILD_DATE;
+  }
+  std::string author() {
+    return AUTHOR;
+  }
+  std::string description() {
+    return DESCRIPTION;
+  }
+  std::string readme() {
+    return README;
+  }
+  std::string logo() {
+    return PROJECT_LOGO;
+  }
+  std::string icon() {
+    return PROJECT_ICON;
+  }
+  const std::string WHAT("#(@) " PACKAGE_STRING);
+  const std::string IDENT("$Id: " PACKAGE_STRING);
+}

src/version.hxx

@@ -0,0 +1,33 @@
+/*! @file
+
+    @id $Id$
+*/
+//       1         2         3         4         5         6         7         8
+// 45678901234567890123456789012345678901234567890123456789012345678901234567890
+
+#include <string>
+
+namespace NAMESPACE {
+  /// get package string which consists of package name and package version
+  std::string package_string();
+  /// get package name
+  std::string package_name();
+  /// get package version
+  std::string version();
+  /// get code build date
+  std::string build_date();
+  /// get author, i.e. copyright holder
+  std::string author();
+  /// get short package description (1st line of README)
+  std::string description();
+  /// get long package description (starting at 3rd line in README)
+  std::string readme();
+  /// get package logo file name
+  std::string logo();
+  /// get package icon file name
+  std::string icon();
+  /// used for <code>what filename</code>
+  extern const std::string WHAT;
+  /// used for <code>ident filename</code>
+  extern const std::string IDENT;
+}