This library provides a simple and nice C++ wrapper around these libraries, so that programmers can concentrate on functionality. It offers general support for PCSC-lite, OpenSSL, PKCS#11, plus specific functionality for the SuisseID.
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1364 lines
56 KiB
1364 lines
56 KiB
# Doxyfile 1.5.5 |
|
|
|
# This file describes the settings to be used by the documentation system |
|
# doxygen (www.doxygen.org) for a project |
|
# |
|
# All text after a hash (#) is considered a comment and will be ignored |
|
# The format is: |
|
# TAG = value [value, ...] |
|
# For lists items can also be appended using: |
|
# TAG += value [value, ...] |
|
# Values that contain spaces should be placed between quotes (" ") |
|
|
|
#--------------------------------------------------------------------------- |
|
# Project related configuration options |
|
#--------------------------------------------------------------------------- |
|
|
|
# This tag specifies the encoding used for all characters in the config file |
|
# that follow. The default is UTF-8 which is also the encoding used for all |
|
# text before the first occurrence of this tag. Doxygen uses libiconv (or the |
|
# iconv built into libc) for the transcoding. See |
|
# http://www.gnu.org/software/libiconv for the list of possible encodings. |
|
|
|
DOXYFILE_ENCODING = UTF-8 |
|
|
|
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded |
|
# by quotes) that should identify the project. |
|
|
|
PROJECT_NAME = "Projektdokumentation @PACKAGENAME@" |
|
|
|
# The PROJECT_NUMBER tag can be used to enter a project or revision number. |
|
# This could be handy for archiving the generated documentation or |
|
# if some version control system is used. |
|
|
|
PROJECT_NUMBER = "Version @MAJOR@.@MINOR@.@LEAST@" |
|
|
|
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) |
|
# base path where the generated documentation will be put. |
|
# If a relative path is entered, it will be relative to the location |
|
# where doxygen was started. If left blank the current directory will be used. |
|
|
|
OUTPUT_DIRECTORY = |
|
|
|
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create |
|
# 4096 sub-directories (in 2 levels) under the output directory of each output |
|
# format and will distribute the generated files over these directories. |
|
# Enabling this option can be useful when feeding doxygen a huge amount of |
|
# source files, where putting all generated files in the same directory would |
|
# otherwise cause performance problems for the file system. |
|
|
|
CREATE_SUBDIRS = NO |
|
|
|
# The OUTPUT_LANGUAGE tag is used to specify the language in which all |
|
# documentation generated by doxygen is written. Doxygen will use this |
|
# information to generate all constant output in the proper language. |
|
# The default language is English, other supported languages are: |
|
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, |
|
# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, |
|
# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), |
|
# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, |
|
# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, |
|
# and Ukrainian. |
|
|
|
OUTPUT_LANGUAGE = German |
|
|
|
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will |
|
# include brief member descriptions after the members that are listed in |
|
# the file and class documentation (similar to JavaDoc). |
|
# Set to NO to disable this. |
|
|
|
BRIEF_MEMBER_DESC = YES |
|
|
|
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend |
|
# the brief description of a member or function before the detailed description. |
|
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the |
|
# brief descriptions will be completely suppressed. |
|
|
|
REPEAT_BRIEF = YES |
|
|
|
# This tag implements a quasi-intelligent brief description abbreviator |
|
# that is used to form the text in various listings. Each string |
|
# in this list, if found as the leading text of the brief description, will be |
|
# stripped from the text and the result after processing the whole list, is |
|
# used as the annotated text. Otherwise, the brief description is used as-is. |
|
# If left blank, the following values are used ("$name" is automatically |
|
# replaced with the name of the entity): "The $name class" "The $name widget" |
|
# "The $name file" "is" "provides" "specifies" "contains" |
|
# "represents" "a" "an" "the" |
|
|
|
ABBREVIATE_BRIEF = |
|
|
|
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then |
|
# Doxygen will generate a detailed section even if there is only a brief |
|
# description. |
|
|
|
ALWAYS_DETAILED_SEC = NO |
|
|
|
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all |
|
# inherited members of a class in the documentation of that class as if those |
|
# members were ordinary class members. Constructors, destructors and assignment |
|
# operators of the base classes will not be shown. |
|
|
|
INLINE_INHERITED_MEMB = NO |
|
|
|
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full |
|
# path before files name in the file list and in the header files. If set |
|
# to NO the shortest path that makes the file name unique will be used. |
|
|
|
FULL_PATH_NAMES = YES |
|
|
|
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag |
|
# can be used to strip a user-defined part of the path. Stripping is |
|
# only done if one of the specified strings matches the left-hand part of |
|
# the path. The tag can be used to show relative paths in the file list. |
|
# If left blank the directory from which doxygen is run is used as the |
|
# path to strip. |
|
|
|
STRIP_FROM_PATH = |
|
|
|
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of |
|
# the path mentioned in the documentation of a class, which tells |
|
# the reader which header file to include in order to use a class. |
|
# If left blank only the name of the header file containing the class |
|
# definition is used. Otherwise one should specify the include paths that |
|
# are normally passed to the compiler using the -I flag. |
|
|
|
STRIP_FROM_INC_PATH = |
|
|
|
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter |
|
# (but less readable) file names. This can be useful is your file systems |
|
# doesn't support long names like on DOS, Mac, or CD-ROM. |
|
|
|
SHORT_NAMES = NO |
|
|
|
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen |
|
# will interpret the first line (until the first dot) of a JavaDoc-style |
|
# comment as the brief description. If set to NO, the JavaDoc |
|
# comments will behave just like regular Qt-style comments |
|
# (thus requiring an explicit @brief command for a brief description.) |
|
|
|
JAVADOC_AUTOBRIEF = NO |
|
|
|
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will |
|
# interpret the first line (until the first dot) of a Qt-style |
|
# comment as the brief description. If set to NO, the comments |
|
# will behave just like regular Qt-style comments (thus requiring |
|
# an explicit \brief command for a brief description.) |
|
|
|
QT_AUTOBRIEF = NO |
|
|
|
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen |
|
# treat a multi-line C++ special comment block (i.e. a block of //! or /// |
|
# comments) as a brief description. This used to be the default behaviour. |
|
# The new default is to treat a multi-line C++ comment block as a detailed |
|
# description. Set this tag to YES if you prefer the old behaviour instead. |
|
|
|
MULTILINE_CPP_IS_BRIEF = YES |
|
|
|
# If the DETAILS_AT_TOP tag is set to YES then Doxygen |
|
# will output the detailed description near the top, like JavaDoc. |
|
# If set to NO, the detailed description appears after the member |
|
# documentation. |
|
|
|
DETAILS_AT_TOP = YES |
|
|
|
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented |
|
# member inherits the documentation from any documented member that it |
|
# re-implements. |
|
|
|
INHERIT_DOCS = YES |
|
|
|
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce |
|
# a new page for each member. If set to NO, the documentation of a member will |
|
# be part of the file/class/namespace that contains it. |
|
|
|
SEPARATE_MEMBER_PAGES = NO |
|
|
|
# The TAB_SIZE tag can be used to set the number of spaces in a tab. |
|
# Doxygen uses this value to replace tabs by spaces in code fragments. |
|
|
|
TAB_SIZE = 2 |
|
|
|
# This tag can be used to specify a number of aliases that acts |
|
# as commands in the documentation. An alias has the form "name=value". |
|
# For example adding "sideeffect=\par Side Effects:\n" will allow you to |
|
# put the command \sideeffect (or @sideeffect) in the documentation, which |
|
# will result in a user-defined paragraph with heading "Side Effects:". |
|
# You can put \n's in the value part of an alias to insert newlines. |
|
|
|
ALIASES = "id=\par File-ID\n" \ |
|
"copy=\par Copyright\n" \ |
|
"license=\par License\n" \ |
|
"classmutex=\par Reentrant:\nAccess is locked with class static mutex @c " \ |
|
"instancemutex=\par Reentrant:\nAccess is locked with per instance mutex @c " \ |
|
"mutex=\par Reentrant:\nAccess is locked with mutex @c " |
|
|
|
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C |
|
# sources only. Doxygen will then generate output that is more tailored for C. |
|
# For instance, some of the names that are used will be different. The list |
|
# of all members will be omitted, etc. |
|
|
|
OPTIMIZE_OUTPUT_FOR_C = NO |
|
|
|
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java |
|
# sources only. Doxygen will then generate output that is more tailored for |
|
# Java. For instance, namespaces will be presented as packages, qualified |
|
# scopes will look different, etc. |
|
|
|
OPTIMIZE_OUTPUT_JAVA = NO |
|
|
|
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran |
|
# sources only. Doxygen will then generate output that is more tailored for |
|
# Fortran. |
|
|
|
OPTIMIZE_FOR_FORTRAN = NO |
|
|
|
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL |
|
# sources. Doxygen will then generate output that is tailored for |
|
# VHDL. |
|
|
|
OPTIMIZE_OUTPUT_VHDL = NO |
|
|
|
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want |
|
# to include (a tag file for) the STL sources as input, then you should |
|
# set this tag to YES in order to let doxygen match functions declarations and |
|
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. |
|
# func(std::string) {}). This also make the inheritance and collaboration |
|
# diagrams that involve STL classes more complete and accurate. |
|
|
|
BUILTIN_STL_SUPPORT = NO |
|
|
|
# If you use Microsoft's C++/CLI language, you should set this option to YES to |
|
# enable parsing support. |
|
|
|
CPP_CLI_SUPPORT = NO |
|
|
|
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. |
|
# Doxygen will parse them like normal C++ but will assume all classes use public |
|
# instead of private inheritance when no explicit protection keyword is present. |
|
|
|
SIP_SUPPORT = NO |
|
|
|
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC |
|
# tag is set to YES, then doxygen will reuse the documentation of the first |
|
# member in the group (if any) for the other members of the group. By default |
|
# all members of a group must be documented explicitly. |
|
|
|
DISTRIBUTE_GROUP_DOC = YES |
|
|
|
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of |
|
# the same type (for instance a group of public functions) to be put as a |
|
# subgroup of that type (e.g. under the Public Functions section). Set it to |
|
# NO to prevent subgrouping. Alternatively, this can be done per class using |
|
# the \nosubgrouping command. |
|
|
|
SUBGROUPING = YES |
|
|
|
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum |
|
# is documented as struct, union, or enum with the name of the typedef. So |
|
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct |
|
# with name TypeT. When disabled the typedef will appear as a member of a file, |
|
# namespace, or class. And the struct will be named TypeS. This can typically |
|
# be useful for C code in case the coding convention dictates that all compound |
|
# types are typedef'ed and only the typedef is referenced, never the tag name. |
|
|
|
TYPEDEF_HIDES_STRUCT = NO |
|
|
|
#--------------------------------------------------------------------------- |
|
# Build related configuration options |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in |
|
# documentation are documented, even if no documentation was available. |
|
# Private class members and static file members will be hidden unless |
|
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES |
|
|
|
EXTRACT_ALL = YES |
|
|
|
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class |
|
# will be included in the documentation. |
|
|
|
EXTRACT_PRIVATE = YES |
|
|
|
# If the EXTRACT_STATIC tag is set to YES all static members of a file |
|
# will be included in the documentation. |
|
|
|
EXTRACT_STATIC = YES |
|
|
|
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) |
|
# defined locally in source files will be included in the documentation. |
|
# If set to NO only classes defined in header files are included. |
|
|
|
EXTRACT_LOCAL_CLASSES = YES |
|
|
|
# This flag is only useful for Objective-C code. When set to YES local |
|
# methods, which are defined in the implementation section but not in |
|
# the interface are included in the documentation. |
|
# If set to NO (the default) only methods in the interface are included. |
|
|
|
EXTRACT_LOCAL_METHODS = NO |
|
|
|
# If this flag is set to YES, the members of anonymous namespaces will be |
|
# extracted and appear in the documentation as a namespace called |
|
# 'anonymous_namespace{file}', where file will be replaced with the base |
|
# name of the file that contains the anonymous namespace. By default |
|
# anonymous namespace are hidden. |
|
|
|
EXTRACT_ANON_NSPACES = NO |
|
|
|
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all |
|
# undocumented members of documented classes, files or namespaces. |
|
# If set to NO (the default) these members will be included in the |
|
# various overviews, but no documentation section is generated. |
|
# This option has no effect if EXTRACT_ALL is enabled. |
|
|
|
HIDE_UNDOC_MEMBERS = NO |
|
|
|
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all |
|
# undocumented classes that are normally visible in the class hierarchy. |
|
# If set to NO (the default) these classes will be included in the various |
|
# overviews. This option has no effect if EXTRACT_ALL is enabled. |
|
|
|
HIDE_UNDOC_CLASSES = NO |
|
|
|
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all |
|
# friend (class|struct|union) declarations. |
|
# If set to NO (the default) these declarations will be included in the |
|
# documentation. |
|
|
|
HIDE_FRIEND_COMPOUNDS = YES |
|
|
|
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any |
|
# documentation blocks found inside the body of a function. |
|
# If set to NO (the default) these blocks will be appended to the |
|
# function's detailed documentation block. |
|
|
|
HIDE_IN_BODY_DOCS = NO |
|
|
|
# The INTERNAL_DOCS tag determines if documentation |
|
# that is typed after a \internal command is included. If the tag is set |
|
# to NO (the default) then the documentation will be excluded. |
|
# Set it to YES to include the internal documentation. |
|
|
|
INTERNAL_DOCS = NO |
|
|
|
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate |
|
# file names in lower-case letters. If set to YES upper-case letters are also |
|
# allowed. This is useful if you have classes or files whose names only differ |
|
# in case and if your file system supports case sensitive file names. Windows |
|
# and Mac users are advised to set this option to NO. |
|
|
|
CASE_SENSE_NAMES = YES |
|
|
|
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen |
|
# will show members with their full class and namespace scopes in the |
|
# documentation. If set to YES the scope will be hidden. |
|
|
|
HIDE_SCOPE_NAMES = NO |
|
|
|
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen |
|
# will put a list of the files that are included by a file in the documentation |
|
# of that file. |
|
|
|
SHOW_INCLUDE_FILES = NO |
|
|
|
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] |
|
# is inserted in the documentation for inline members. |
|
|
|
INLINE_INFO = YES |
|
|
|
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen |
|
# will sort the (detailed) documentation of file and class members |
|
# alphabetically by member name. If set to NO the members will appear in |
|
# declaration order. |
|
|
|
SORT_MEMBER_DOCS = YES |
|
|
|
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the |
|
# brief documentation of file, namespace and class members alphabetically |
|
# by member name. If set to NO (the default) the members will appear in |
|
# declaration order. |
|
|
|
SORT_BRIEF_DOCS = NO |
|
|
|
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the |
|
# hierarchy of group names into alphabetical order. If set to NO (the default) |
|
# the group names will appear in their defined order. |
|
|
|
SORT_GROUP_NAMES = NO |
|
|
|
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be |
|
# sorted by fully-qualified names, including namespaces. If set to |
|
# NO (the default), the class list will be sorted only by class name, |
|
# not including the namespace part. |
|
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. |
|
# Note: This option applies only to the class list, not to the |
|
# alphabetical list. |
|
|
|
SORT_BY_SCOPE_NAME = NO |
|
|
|
# The GENERATE_TODOLIST tag can be used to enable (YES) or |
|
# disable (NO) the todo list. This list is created by putting \todo |
|
# commands in the documentation. |
|
|
|
GENERATE_TODOLIST = YES |
|
|
|
# The GENERATE_TESTLIST tag can be used to enable (YES) or |
|
# disable (NO) the test list. This list is created by putting \test |
|
# commands in the documentation. |
|
|
|
GENERATE_TESTLIST = YES |
|
|
|
# The GENERATE_BUGLIST tag can be used to enable (YES) or |
|
# disable (NO) the bug list. This list is created by putting \bug |
|
# commands in the documentation. |
|
|
|
GENERATE_BUGLIST = YES |
|
|
|
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or |
|
# disable (NO) the deprecated list. This list is created by putting |
|
# \deprecated commands in the documentation. |
|
|
|
GENERATE_DEPRECATEDLIST= YES |
|
|
|
# The ENABLED_SECTIONS tag can be used to enable conditional |
|
# documentation sections, marked by \if sectionname ... \endif. |
|
|
|
ENABLED_SECTIONS = |
|
|
|
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines |
|
# the initial value of a variable or define consists of for it to appear in |
|
# the documentation. If the initializer consists of more lines than specified |
|
# here it will be hidden. Use a value of 0 to hide initializers completely. |
|
# The appearance of the initializer of individual variables and defines in the |
|
# documentation can be controlled using \showinitializer or \hideinitializer |
|
# command in the documentation regardless of this setting. |
|
|
|
MAX_INITIALIZER_LINES = 30 |
|
|
|
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated |
|
# at the bottom of the documentation of classes and structs. If set to YES the |
|
# list will mention the files that were used to generate the documentation. |
|
|
|
SHOW_USED_FILES = YES |
|
|
|
# If the sources in your project are distributed over multiple directories |
|
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy |
|
# in the documentation. The default is NO. |
|
|
|
SHOW_DIRECTORIES = NO |
|
|
|
# The FILE_VERSION_FILTER tag can be used to specify a program or script that |
|
# doxygen should invoke to get the current version for each file (typically from |
|
# the version control system). Doxygen will invoke the program by executing (via |
|
# popen()) the command <command> <input-file>, where <command> is the value of |
|
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file |
|
# provided by doxygen. Whatever the program writes to standard output |
|
# is used as the file version. See the manual for examples. |
|
|
|
FILE_VERSION_FILTER = |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to warning and progress messages |
|
#--------------------------------------------------------------------------- |
|
|
|
# The QUIET tag can be used to turn on/off the messages that are generated |
|
# by doxygen. Possible values are YES and NO. If left blank NO is used. |
|
|
|
QUIET = NO |
|
|
|
# The WARNINGS tag can be used to turn on/off the warning messages that are |
|
# generated by doxygen. Possible values are YES and NO. If left blank |
|
# NO is used. |
|
|
|
WARNINGS = YES |
|
|
|
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings |
|
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will |
|
# automatically be disabled. |
|
|
|
WARN_IF_UNDOCUMENTED = NO |
|
|
|
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for |
|
# potential errors in the documentation, such as not documenting some |
|
# parameters in a documented function, or documenting parameters that |
|
# don't exist or using markup commands wrongly. |
|
|
|
WARN_IF_DOC_ERROR = YES |
|
|
|
# This WARN_NO_PARAMDOC option can be abled to get warnings for |
|
# functions that are documented, but have no documentation for their parameters |
|
# or return value. If set to NO (the default) doxygen will only warn about |
|
# wrong or incomplete parameter documentation, but not about the absence of |
|
# documentation. |
|
|
|
WARN_NO_PARAMDOC = NO |
|
|
|
# The WARN_FORMAT tag determines the format of the warning messages that |
|
# doxygen can produce. The string should contain the $file, $line, and $text |
|
# tags, which will be replaced by the file and line number from which the |
|
# warning originated and the warning text. Optionally the format may contain |
|
# $version, which will be replaced by the version of the file (if it could |
|
# be obtained via FILE_VERSION_FILTER) |
|
|
|
WARN_FORMAT = "$file:$line: $text" |
|
|
|
# The WARN_LOGFILE tag can be used to specify a file to which warning |
|
# and error messages should be written. If left blank the output is written |
|
# to stderr. |
|
|
|
WARN_LOGFILE = doxygen.errors |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the input files |
|
#--------------------------------------------------------------------------- |
|
|
|
# The INPUT tag can be used to specify the files and/or directories that contain |
|
# documented source files. You may enter file names like "myfile.cpp" or |
|
# directories like "/usr/src/myproject". Separate the files or directories |
|
# with spaces. |
|
|
|
INPUT = @SRCDIR@/../src |
|
|
|
# This tag can be used to specify the character encoding of the source files |
|
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is |
|
# also the default input encoding. Doxygen uses libiconv (or the iconv built |
|
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for |
|
# the list of possible encodings. |
|
|
|
INPUT_ENCODING = UTF-8 |
|
|
|
# If the value of the INPUT tag contains directories, you can use the |
|
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
|
# and *.h) to filter out the source-files in the directories. If left |
|
# blank the following patterns are tested: |
|
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx |
|
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 |
|
|
|
FILE_PATTERNS = *.[ch]xx \ |
|
*.doc |
|
|
|
# The RECURSIVE tag can be used to turn specify whether or not subdirectories |
|
# should be searched for input files as well. Possible values are YES and NO. |
|
# If left blank NO is used. |
|
|
|
RECURSIVE = NO |
|
|
|
# The EXCLUDE tag can be used to specify files and/or directories that should |
|
# excluded from the INPUT source files. This way you can easily exclude a |
|
# subdirectory from a directory tree whose root is specified with the INPUT tag. |
|
|
|
EXCLUDE = |
|
|
|
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or |
|
# directories that are symbolic links (a Unix filesystem feature) are excluded |
|
# from the input. |
|
|
|
EXCLUDE_SYMLINKS = NO |
|
|
|
# If the value of the INPUT tag contains directories, you can use the |
|
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude |
|
# certain files from those directories. Note that the wildcards are matched |
|
# against the file with absolute path, so to exclude all test directories |
|
# for example use the pattern */test/* |
|
|
|
EXCLUDE_PATTERNS = moc_* \ |
|
uic_* \ |
|
qrc_* |
|
|
|
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names |
|
# (namespaces, classes, functions, etc.) that should be excluded from the |
|
# output. The symbol name can be a fully qualified name, a word, or if the |
|
# wildcard * is used, a substring. Examples: ANamespace, AClass, |
|
# AClass::ANamespace, ANamespace::*Test |
|
|
|
EXCLUDE_SYMBOLS = |
|
|
|
# The EXAMPLE_PATH tag can be used to specify one or more files or |
|
# directories that contain example code fragments that are included (see |
|
# the \include command). |
|
|
|
EXAMPLE_PATH = . |
|
|
|
# If the value of the EXAMPLE_PATH tag contains directories, you can use the |
|
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
|
# and *.h) to filter out the source-files in the directories. If left |
|
# blank all files are included. |
|
|
|
EXAMPLE_PATTERNS = |
|
|
|
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be |
|
# searched for input files to be used with the \include or \dontinclude |
|
# commands irrespective of the value of the RECURSIVE tag. |
|
# Possible values are YES and NO. If left blank NO is used. |
|
|
|
EXAMPLE_RECURSIVE = NO |
|
|
|
# The IMAGE_PATH tag can be used to specify one or more files or |
|
# directories that contain image that are included in the documentation (see |
|
# the \image command). |
|
|
|
IMAGE_PATH = |
|
|
|
# The INPUT_FILTER tag can be used to specify a program that doxygen should |
|
# invoke to filter for each input file. Doxygen will invoke the filter program |
|
# by executing (via popen()) the command <filter> <input-file>, where <filter> |
|
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an |
|
# input file. Doxygen will then use the output that the filter program writes |
|
# to standard output. If FILTER_PATTERNS is specified, this tag will be |
|
# ignored. |
|
|
|
INPUT_FILTER = |
|
|
|
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern |
|
# basis. Doxygen will compare the file name with each pattern and apply the |
|
# filter if there is a match. The filters are a list of the form: |
|
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further |
|
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER |
|
# is applied to all files. |
|
|
|
FILTER_PATTERNS = |
|
|
|
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using |
|
# INPUT_FILTER) will be used to filter the input files when producing source |
|
# files to browse (i.e. when SOURCE_BROWSER is set to YES). |
|
|
|
FILTER_SOURCE_FILES = NO |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to source browsing |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the SOURCE_BROWSER tag is set to YES then a list of source files will |
|
# be generated. Documented entities will be cross-referenced with these sources. |
|
# Note: To get rid of all source code in the generated output, make sure also |
|
# VERBATIM_HEADERS is set to NO. |
|
|
|
SOURCE_BROWSER = YES |
|
|
|
# Setting the INLINE_SOURCES tag to YES will include the body |
|
# of functions and classes directly in the documentation. |
|
|
|
INLINE_SOURCES = YES |
|
|
|
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct |
|
# doxygen to hide any special comment blocks from generated source code |
|
# fragments. Normal C and C++ comments will always remain visible. |
|
|
|
STRIP_CODE_COMMENTS = YES |
|
|
|
# If the REFERENCED_BY_RELATION tag is set to YES (the default) |
|
# then for each documented function all documented |
|
# functions referencing it will be listed. |
|
|
|
REFERENCED_BY_RELATION = YES |
|
|
|
# If the REFERENCES_RELATION tag is set to YES (the default) |
|
# then for each documented function all documented entities |
|
# called/used by that function will be listed. |
|
|
|
REFERENCES_RELATION = YES |
|
|
|
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) |
|
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from |
|
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will |
|
# link to the source code. Otherwise they will link to the documentstion. |
|
|
|
REFERENCES_LINK_SOURCE = YES |
|
|
|
# If the USE_HTAGS tag is set to YES then the references to source code |
|
# will point to the HTML generated by the htags(1) tool instead of doxygen |
|
# built-in source browser. The htags tool is part of GNU's global source |
|
# tagging system (see http://www.gnu.org/software/global/global.html). You |
|
# will need version 4.8.6 or higher. |
|
|
|
USE_HTAGS = NO |
|
|
|
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen |
|
# will generate a verbatim copy of the header file for each class for |
|
# which an include is specified. Set to NO to disable this. |
|
|
|
VERBATIM_HEADERS = YES |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the alphabetical class index |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index |
|
# of all compounds will be generated. Enable this if the project |
|
# contains a lot of classes, structs, unions or interfaces. |
|
|
|
ALPHABETICAL_INDEX = YES |
|
|
|
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then |
|
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns |
|
# in which this list will be split (can be a number in the range [1..20]) |
|
|
|
COLS_IN_ALPHA_INDEX = 5 |
|
|
|
# In case all classes in a project start with a common prefix, all |
|
# classes will be put under the same header in the alphabetical index. |
|
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that |
|
# should be ignored while generating the index headers. |
|
|
|
IGNORE_PREFIX = |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the HTML output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will |
|
# generate HTML output. |
|
|
|
GENERATE_HTML = YES |
|
|
|
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. |
|
# If a relative path is entered the value of OUTPUT_DIRECTORY will be |
|
# put in front of it. If left blank `html' will be used as the default path. |
|
|
|
HTML_OUTPUT = html |
|
|
|
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for |
|
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank |
|
# doxygen will generate files with .html extension. |
|
|
|
HTML_FILE_EXTENSION = .html |
|
|
|
# The HTML_HEADER tag can be used to specify a personal HTML header for |
|
# each generated HTML page. If it is left blank doxygen will generate a |
|
# standard header. |
|
|
|
HTML_HEADER = |
|
|
|
# The HTML_FOOTER tag can be used to specify a personal HTML footer for |
|
# each generated HTML page. If it is left blank doxygen will generate a |
|
# standard footer. |
|
|
|
HTML_FOOTER = |
|
|
|
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading |
|
# style sheet that is used by each HTML page. It can be used to |
|
# fine-tune the look of the HTML output. If the tag is left blank doxygen |
|
# will generate a default style sheet. Note that doxygen will try to copy |
|
# the style sheet file to the HTML output directory, so don't put your own |
|
# stylesheet in the HTML output directory as well, or it will be erased! |
|
|
|
HTML_STYLESHEET = |
|
|
|
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, |
|
# files or namespaces will be aligned in HTML using tables. If set to |
|
# NO a bullet list will be used. |
|
|
|
HTML_ALIGN_MEMBERS = YES |
|
|
|
# If the GENERATE_HTMLHELP tag is set to YES, additional index files |
|
# will be generated that can be used as input for tools like the |
|
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) |
|
# of the generated HTML documentation. |
|
|
|
GENERATE_HTMLHELP = NO |
|
|
|
# If the GENERATE_DOCSET tag is set to YES, additional index files |
|
# will be generated that can be used as input for Apple's Xcode 3 |
|
# integrated development environment, introduced with OSX 10.5 (Leopard). |
|
# To create a documentation set, doxygen will generate a Makefile in the |
|
# HTML output directory. Running make will produce the docset in that |
|
# directory and running "make install" will install the docset in |
|
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find |
|
# it at startup. |
|
|
|
GENERATE_DOCSET = NO |
|
|
|
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the |
|
# feed. A documentation feed provides an umbrella under which multiple |
|
# documentation sets from a single provider (such as a company or product suite) |
|
# can be grouped. |
|
|
|
DOCSET_FEEDNAME = "Doxygen generated docs" |
|
|
|
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that |
|
# should uniquely identify the documentation set bundle. This should be a |
|
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen |
|
# will append .docset to the name. |
|
|
|
DOCSET_BUNDLE_ID = org.doxygen.Project |
|
|
|
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML |
|
# documentation will contain sections that can be hidden and shown after the |
|
# page has loaded. For this to work a browser that supports |
|
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox |
|
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). |
|
|
|
HTML_DYNAMIC_SECTIONS = NO |
|
|
|
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can |
|
# be used to specify the file name of the resulting .chm file. You |
|
# can add a path in front of the file if the result should not be |
|
# written to the html output directory. |
|
|
|
CHM_FILE = |
|
|
|
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can |
|
# be used to specify the location (absolute path including file name) of |
|
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run |
|
# the HTML help compiler on the generated index.hhp. |
|
|
|
HHC_LOCATION = |
|
|
|
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag |
|
# controls if a separate .chi index file is generated (YES) or that |
|
# it should be included in the master .chm file (NO). |
|
|
|
GENERATE_CHI = NO |
|
|
|
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag |
|
# controls whether a binary table of contents is generated (YES) or a |
|
# normal table of contents (NO) in the .chm file. |
|
|
|
BINARY_TOC = NO |
|
|
|
# The TOC_EXPAND flag can be set to YES to add extra items for group members |
|
# to the contents of the HTML help documentation and to the tree view. |
|
|
|
TOC_EXPAND = NO |
|
|
|
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at |
|
# top of each HTML page. The value NO (the default) enables the index and |
|
# the value YES disables it. |
|
|
|
DISABLE_INDEX = NO |
|
|
|
# This tag can be used to set the number of enum values (range [1..20]) |
|
# that doxygen will group on one line in the generated HTML documentation. |
|
|
|
ENUM_VALUES_PER_LINE = 4 |
|
|
|
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be |
|
# generated containing a tree-like index structure (just like the one that |
|
# is generated for HTML Help). For this to work a browser that supports |
|
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, |
|
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are |
|
# probably better off using the HTML help feature. |
|
|
|
GENERATE_TREEVIEW = NO |
|
|
|
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be |
|
# used to set the initial width (in pixels) of the frame in which the tree |
|
# is shown. |
|
|
|
TREEVIEW_WIDTH = 250 |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the LaTeX output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will |
|
# generate Latex output. |
|
|
|
GENERATE_LATEX = YES |
|
|
|
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. |
|
# If a relative path is entered the value of OUTPUT_DIRECTORY will be |
|
# put in front of it. If left blank `latex' will be used as the default path. |
|
|
|
LATEX_OUTPUT = latex |
|
|
|
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be |
|
# invoked. If left blank `latex' will be used as the default command name. |
|
|
|
LATEX_CMD_NAME = latex |
|
|
|
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to |
|
# generate index for LaTeX. If left blank `makeindex' will be used as the |
|
# default command name. |
|
|
|
MAKEINDEX_CMD_NAME = makeindex |
|
|
|
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact |
|
# LaTeX documents. This may be useful for small projects and may help to |
|
# save some trees in general. |
|
|
|
COMPACT_LATEX = NO |
|
|
|
# The PAPER_TYPE tag can be used to set the paper type that is used |
|
# by the printer. Possible values are: a4, a4wide, letter, legal and |
|
# executive. If left blank a4wide will be used. |
|
|
|
PAPER_TYPE = a4 |
|
|
|
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX |
|
# packages that should be included in the LaTeX output. |
|
|
|
EXTRA_PACKAGES = |
|
|
|
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for |
|
# the generated latex document. The header should contain everything until |
|
# the first chapter. If it is left blank doxygen will generate a |
|
# standard header. Notice: only use this tag if you know what you are doing! |
|
|
|
LATEX_HEADER = |
|
|
|
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated |
|
# is prepared for conversion to pdf (using ps2pdf). The pdf file will |
|
# contain links (just like the HTML output) instead of page references |
|
# This makes the output suitable for online browsing using a pdf viewer. |
|
|
|
PDF_HYPERLINKS = YES |
|
|
|
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of |
|
# plain latex in the generated Makefile. Set this option to YES to get a |
|
# higher quality PDF documentation. |
|
|
|
USE_PDFLATEX = YES |
|
|
|
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. |
|
# command to the generated LaTeX files. This will instruct LaTeX to keep |
|
# running if errors occur, instead of asking the user for help. |
|
# This option is also used when generating formulas in HTML. |
|
|
|
LATEX_BATCHMODE = NO |
|
|
|
# If LATEX_HIDE_INDICES is set to YES then doxygen will not |
|
# include the index chapters (such as File Index, Compound Index, etc.) |
|
# in the output. |
|
|
|
LATEX_HIDE_INDICES = YES |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the RTF output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output |
|
# The RTF output is optimized for Word 97 and may not look very pretty with |
|
# other RTF readers or editors. |
|
|
|
GENERATE_RTF = NO |
|
|
|
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. |
|
# If a relative path is entered the value of OUTPUT_DIRECTORY will be |
|
# put in front of it. If left blank `rtf' will be used as the default path. |
|
|
|
RTF_OUTPUT = rtf |
|
|
|
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact |
|
# RTF documents. This may be useful for small projects and may help to |
|
# save some trees in general. |
|
|
|
COMPACT_RTF = YES |
|
|
|
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated |
|
# will contain hyperlink fields. The RTF file will |
|
# contain links (just like the HTML output) instead of page references. |
|
# This makes the output suitable for online browsing using WORD or other |
|
# programs which support those fields. |
|
# Note: wordpad (write) and others do not support links. |
|
|
|
RTF_HYPERLINKS = YES |
|
|
|
# Load stylesheet definitions from file. Syntax is similar to doxygen's |
|
# config file, i.e. a series of assignments. You only have to provide |
|
# replacements, missing definitions are set to their default value. |
|
|
|
RTF_STYLESHEET_FILE = |
|
|
|
# Set optional variables used in the generation of an rtf document. |
|
# Syntax is similar to doxygen's config file. |
|
|
|
RTF_EXTENSIONS_FILE = |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the man page output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will |
|
# generate man pages |
|
|
|
GENERATE_MAN = NO |
|
|
|
# The MAN_OUTPUT tag is used to specify where the man pages will be put. |
|
# If a relative path is entered the value of OUTPUT_DIRECTORY will be |
|
# put in front of it. If left blank `man' will be used as the default path. |
|
|
|
MAN_OUTPUT = man |
|
|
|
# The MAN_EXTENSION tag determines the extension that is added to |
|
# the generated man pages (default is the subroutine's section .3) |
|
|
|
MAN_EXTENSION = .3 |
|
|
|
# If the MAN_LINKS tag is set to YES and Doxygen generates man output, |
|
# then it will generate one additional man file for each entity |
|
# documented in the real man page(s). These additional files |
|
# only source the real man page, but without them the man command |
|
# would be unable to find the correct page. The default is NO. |
|
|
|
MAN_LINKS = YES |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the XML output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_XML tag is set to YES Doxygen will |
|
# generate an XML file that captures the structure of |
|
# the code including all documentation. |
|
|
|
GENERATE_XML = NO |
|
|
|
# The XML_OUTPUT tag is used to specify where the XML pages will be put. |
|
# If a relative path is entered the value of OUTPUT_DIRECTORY will be |
|
# put in front of it. If left blank `xml' will be used as the default path. |
|
|
|
XML_OUTPUT = xml |
|
|
|
# The XML_SCHEMA tag can be used to specify an XML schema, |
|
# which can be used by a validating XML parser to check the |
|
# syntax of the XML files. |
|
|
|
XML_SCHEMA = |
|
|
|
# The XML_DTD tag can be used to specify an XML DTD, |
|
# which can be used by a validating XML parser to check the |
|
# syntax of the XML files. |
|
|
|
XML_DTD = |
|
|
|
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will |
|
# dump the program listings (including syntax highlighting |
|
# and cross-referencing information) to the XML output. Note that |
|
# enabling this will significantly increase the size of the XML output. |
|
|
|
XML_PROGRAMLISTING = YES |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options for the AutoGen Definitions output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will |
|
# generate an AutoGen Definitions (see autogen.sf.net) file |
|
# that captures the structure of the code including all |
|
# documentation. Note that this feature is still experimental |
|
# and incomplete at the moment. |
|
|
|
GENERATE_AUTOGEN_DEF = NO |
|
|
|
#--------------------------------------------------------------------------- |
|
# configuration options related to the Perl module output |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the GENERATE_PERLMOD tag is set to YES Doxygen will |
|
# generate a Perl module file that captures the structure of |
|
# the code including all documentation. Note that this |
|
# feature is still experimental and incomplete at the |
|
# moment. |
|
|
|
GENERATE_PERLMOD = NO |
|
|
|
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate |
|
# the necessary Makefile rules, Perl scripts and LaTeX code to be able |
|
# to generate PDF and DVI output from the Perl module output. |
|
|
|
PERLMOD_LATEX = NO |
|
|
|
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be |
|
# nicely formatted so it can be parsed by a human reader. This is useful |
|
# if you want to understand what is going on. On the other hand, if this |
|
# tag is set to NO the size of the Perl module output will be much smaller |
|
# and Perl will parse it just the same. |
|
|
|
PERLMOD_PRETTY = YES |
|
|
|
# The names of the make variables in the generated doxyrules.make file |
|
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. |
|
# This is useful so different doxyrules.make files included by the same |
|
# Makefile don't overwrite each other's variables. |
|
|
|
PERLMOD_MAKEVAR_PREFIX = |
|
|
|
#--------------------------------------------------------------------------- |
|
# Configuration options related to the preprocessor |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will |
|
# evaluate all C-preprocessor directives found in the sources and include |
|
# files. |
|
|
|
ENABLE_PREPROCESSING = YES |
|
|
|
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro |
|
# names in the source code. If set to NO (the default) only conditional |
|
# compilation will be performed. Macro expansion can be done in a controlled |
|
# way by setting EXPAND_ONLY_PREDEF to YES. |
|
|
|
MACRO_EXPANSION = NO |
|
|
|
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES |
|
# then the macro expansion is limited to the macros specified with the |
|
# PREDEFINED and EXPAND_AS_DEFINED tags. |
|
|
|
EXPAND_ONLY_PREDEF = NO |
|
|
|
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files |
|
# in the INCLUDE_PATH (see below) will be search if a #include is found. |
|
|
|
SEARCH_INCLUDES = YES |
|
|
|
# The INCLUDE_PATH tag can be used to specify one or more directories that |
|
# contain include files that are not input files but should be processed by |
|
# the preprocessor. |
|
|
|
INCLUDE_PATH = |
|
|
|
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard |
|
# patterns (like *.h and *.hpp) to filter out the header-files in the |
|
# directories. If left blank, the patterns specified with FILE_PATTERNS will |
|
# be used. |
|
|
|
INCLUDE_FILE_PATTERNS = |
|
|
|
# The PREDEFINED tag can be used to specify one or more macro names that |
|
# are defined before the preprocessor is started (similar to the -D option of |
|
# gcc). The argument of the tag is a list of macros of the form: name |
|
# or name=definition (no spaces). If the definition and the = are |
|
# omitted =1 is assumed. To prevent a macro definition from being |
|
# undefined via #undef or recursively expanded use the := operator |
|
# instead of the = operator. |
|
|
|
PREDEFINED = HAVE_STACKTRACE |
|
|
|
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then |
|
# this tag can be used to specify a list of macro names that should be expanded. |
|
# The macro definition that is found in the sources will be used. |
|
# Use the PREDEFINED tag if you want to use a different macro definition. |
|
|
|
EXPAND_AS_DEFINED = |
|
|
|
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then |
|
# doxygen's preprocessor will remove all function-like macros that are alone |
|
# on a line, have an all uppercase name, and do not end with a semicolon. Such |
|
# function macros are typically used for boiler-plate code, and will confuse |
|
# the parser if not removed. |
|
|
|
SKIP_FUNCTION_MACROS = YES |
|
|
|
#--------------------------------------------------------------------------- |
|
# Configuration::additions related to external references |
|
#--------------------------------------------------------------------------- |
|
|
|
# The TAGFILES option can be used to specify one or more tagfiles. |
|
# Optionally an initial location of the external documentation |
|
# can be added for each tagfile. The format of a tag file without |
|
# this location is as follows: |
|
# TAGFILES = file1 file2 ... |
|
# Adding location for the tag files is done as follows: |
|
# TAGFILES = file1=loc1 "file2 = loc2" ... |
|
# where "loc1" and "loc2" can be relative or absolute paths or |
|
# URLs. If a location is present for each tag, the installdox tool |
|
# does not have to be run to correct the links. |
|
# Note that each tag file must have a unique name |
|
# (where the name does NOT include the path) |
|
# If a tag file is not located in the directory in which doxygen |
|
# is run, you must also specify the path to the tagfile here. |
|
|
|
TAGFILES = |
|
|
|
# When a file name is specified after GENERATE_TAGFILE, doxygen will create |
|
# a tag file that is based on the input files it reads. |
|
|
|
GENERATE_TAGFILE = @PACKAGENAME@.doxytag |
|
|
|
# If the ALLEXTERNALS tag is set to YES all external classes will be listed |
|
# in the class index. If set to NO only the inherited external classes |
|
# will be listed. |
|
|
|
ALLEXTERNALS = NO |
|
|
|
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed |
|
# in the modules index. If set to NO, only the current project's groups will |
|
# be listed. |
|
|
|
EXTERNAL_GROUPS = YES |
|
|
|
# The PERL_PATH should be the absolute path and name of the perl script |
|
# interpreter (i.e. the result of `which perl'). |
|
|
|
PERL_PATH = /usr/bin/perl |
|
|
|
#--------------------------------------------------------------------------- |
|
# Configuration options related to the dot tool |
|
#--------------------------------------------------------------------------- |
|
|
|
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will |
|
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base |
|
# or super classes. Setting the tag to NO turns the diagrams off. Note that |
|
# this option is superseded by the HAVE_DOT option below. This is only a |
|
# fallback. It is recommended to install and use dot, since it yields more |
|
# powerful graphs. |
|
|
|
CLASS_DIAGRAMS = YES |
|
|
|
# You can define message sequence charts within doxygen comments using the \msc |
|
# command. Doxygen will then run the mscgen tool (see |
|
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the |
|
# documentation. The MSCGEN_PATH tag allows you to specify the directory where |
|
# the mscgen tool resides. If left empty the tool is assumed to be found in the |
|
# default search path. |
|
|
|
MSCGEN_PATH = |
|
|
|
# If set to YES, the inheritance and collaboration graphs will hide |
|
# inheritance and usage relations if the target is undocumented |
|
# or is not a class. |
|
|
|
HIDE_UNDOC_RELATIONS = NO |
|
|
|
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is |
|
# available from the path. This tool is part of Graphviz, a graph visualization |
|
# toolkit from AT&T and Lucent Bell Labs. The other options in this section |
|
# have no effect if this option is set to NO (the default) |
|
|
|
HAVE_DOT = @HAVE_DOT@ |
|
|
|
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen |
|
# will generate a graph for each documented class showing the direct and |
|
# indirect inheritance relations. Setting this tag to YES will force the |
|
# the CLASS_DIAGRAMS tag to NO. |
|
|
|
CLASS_GRAPH = YES |
|
|
|
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen |
|
# will generate a graph for each documented class showing the direct and |
|
# indirect implementation dependencies (inheritance, containment, and |
|
# class references variables) of the class with other documented classes. |
|
|
|
COLLABORATION_GRAPH = NO |
|
|
|
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen |
|
# will generate a graph for groups, showing the direct groups dependencies |
|
|
|
GROUP_GRAPHS = YES |
|
|
|
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and |
|
# collaboration diagrams in a style similar to the OMG's Unified Modeling |
|
# Language. |
|
|
|
UML_LOOK = NO |
|
|
|
# If set to YES, the inheritance and collaboration graphs will show the |
|
# relations between templates and their instances. |
|
|
|
TEMPLATE_RELATIONS = YES |
|
|
|
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT |
|
# tags are set to YES then doxygen will generate a graph for each documented |
|
# file showing the direct and indirect include dependencies of the file with |
|
# other documented files. |
|
|
|
INCLUDE_GRAPH = NO |
|
|
|
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and |
|
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each |
|
# documented header file showing the documented files that directly or |
|
# indirectly include this file. |
|
|
|
INCLUDED_BY_GRAPH = NO |
|
|
|
# If the CALL_GRAPH and HAVE_DOT options are set to YES then |
|
# doxygen will generate a call dependency graph for every global function |
|
# or class method. Note that enabling this option will significantly increase |
|
# the time of a run. So in most cases it will be better to enable call graphs |
|
# for selected functions only using the \callgraph command. |
|
|
|
CALL_GRAPH = NO |
|
|
|
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then |
|
# doxygen will generate a caller dependency graph for every global function |
|
# or class method. Note that enabling this option will significantly increase |
|
# the time of a run. So in most cases it will be better to enable caller |
|
# graphs for selected functions only using the \callergraph command. |
|
|
|
CALLER_GRAPH = NO |
|
|
|
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen |
|
# will graphical hierarchy of all classes instead of a textual one. |
|
|
|
GRAPHICAL_HIERARCHY = YES |
|
|
|
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES |
|
# then doxygen will show the dependencies a directory has on other directories |
|
# in a graphical way. The dependency relations are determined by the #include |
|
# relations between the files in the directories. |
|
|
|
DIRECTORY_GRAPH = YES |
|
|
|
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images |
|
# generated by dot. Possible values are png, jpg, or gif |
|
# If left blank png will be used. |
|
|
|
DOT_IMAGE_FORMAT = png |
|
|
|
# The tag DOT_PATH can be used to specify the path where the dot tool can be |
|
# found. If left blank, it is assumed the dot tool can be found in the path. |
|
|
|
DOT_PATH = |
|
|
|
# The DOTFILE_DIRS tag can be used to specify one or more directories that |
|
# contain dot files that are included in the documentation (see the |
|
# \dotfile command). |
|
|
|
DOTFILE_DIRS = |
|
|
|
# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of |
|
# nodes that will be shown in the graph. If the number of nodes in a graph |
|
# becomes larger than this value, doxygen will truncate the graph, which is |
|
# visualized by representing a node as a red box. Note that doxygen if the |
|
# number of direct children of the root node in a graph is already larger than |
|
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note |
|
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. |
|
|
|
DOT_GRAPH_MAX_NODES = 50 |
|
|
|
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the |
|
# graphs generated by dot. A depth value of 3 means that only nodes reachable |
|
# from the root by following a path via at most 3 edges will be shown. Nodes |
|
# that lay further from the root node will be omitted. Note that setting this |
|
# option to 1 or 2 may greatly reduce the computation time needed for large |
|
# code bases. Also note that the size of a graph can be further restricted by |
|
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. |
|
|
|
MAX_DOT_GRAPH_DEPTH = 0 |
|
|
|
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent |
|
# background. This is enabled by default, which results in a transparent |
|
# background. Warning: Depending on the platform used, enabling this option |
|
# may lead to badly anti-aliased labels on the edges of a graph (i.e. they |
|
# become hard to read). |
|
|
|
DOT_TRANSPARENT = YES |
|
|
|
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output |
|
# files in one run (i.e. multiple -o and -T options on the command line). This |
|
# makes dot run faster, but since only newer versions of dot (>1.8.10) |
|
# support this, this feature is disabled by default. |
|
|
|
DOT_MULTI_TARGETS = NO |
|
|
|
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will |
|
# generate a legend page explaining the meaning of the various boxes and |
|
# arrows in the dot generated graphs. |
|
|
|
GENERATE_LEGEND = YES |
|
|
|
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will |
|
# remove the intermediate dot files that are used to generate |
|
# the various graphs. |
|
|
|
DOT_CLEANUP = YES |
|
|
|
#--------------------------------------------------------------------------- |
|
# Configuration::additions related to the search engine |
|
#--------------------------------------------------------------------------- |
|
|
|
# The SEARCHENGINE tag specifies whether or not a search engine should be |
|
# used. If set to NO the values of all tags below this one will be ignored. |
|
|
|
SEARCHENGINE = NO
|
|
|